auszookers.com
https://auszookers.com/forum/

PERTH: Custom Rims!
https://auszookers.com/forum/viewtopic.php?f=5&t=16613		 Page 1 of 3
Author:  alien [ Tue Nov 09, 2010 9:01 am ]
Post subject:  PERTH: Custom Rims!
Not sure if this is common knowledge or not, but there is a guy in Perth who makes custom steel rims... Seeing as my order for procomp series 52s missed the boat, I had some new rims custom made to the same measurements (15x7 5x5.5 -38).

The guy who did it is Rob at Summerfield Engineering in Baldivis: (08) 9459 1078 - the weld this guy did, by hand i might add, is one continuous line of awesome - no pics of the raw rim im afraid, but it looks like a bead of silicone its that neat. Cost a little extra as the rim centre was a flip job, so harder to do - total cost was $148/rim

I also had them sandblasted to remove minor surface rust, then primed and powdercoated by Ken at Landsdale Powdercoaters: (08) 9302 1460 for only $50 a rim! The finish is unbelievable, and a very thick coating!

PICS:
Image
Image
Image
Author:  Joe [ Tue Nov 09, 2010 9:05 am ]
Post subject:  Re: PERTH: Custom Rims!
:P 8)

They will look sweet with KM2s wrapped aroud them :P
Author:  toiletduck [ Tue Nov 09, 2010 9:05 am ]
Post subject:  Re: PERTH: Custom Rims!
Very very nice, cant wait to see them fitted. 8)
Author:  atari4x4 [ Tue Nov 09, 2010 9:06 am ]
Post subject:  Re: PERTH: Custom Rims!
whats with all the stud holes?
Author:  Joe [ Tue Nov 09, 2010 9:09 am ]
Post subject:  Re: PERTH: Custom Rims!
atari4x4 wrote:
whats with all the stud holes?


Different stud pattens :roll: :lol:
Author:  royce [ Tue Nov 09, 2010 9:11 am ]
Post subject:  Re: PERTH: Custom Rims!
where did you get those centers in that stud pattern?
Author:  alien [ Tue Nov 09, 2010 9:18 am ]
Post subject:  Re: PERTH: Custom Rims!
royce you failed at reading the original post =P haha

Rob at Summerfield Engineering in Baldivis: (08) 9459 1078

They have a few names, most commonly "5 Slot" or "Chev Rally" rims. Commonly found on the Camaro etc as well as older f100s.

The actual RIM (steel band) is ROH too.
Author:  Red89 [ Tue Nov 09, 2010 9:27 am ]
Post subject:  Re: PERTH: Custom Rims!
So that is $148 per rim or $148 just for the work done to it and the cost of the rim is extra. I will be looking into some next year 8)
Author:  royce [ Tue Nov 09, 2010 9:28 am ]
Post subject:  Re: PERTH: Custom Rims!
alien wrote:
royce you failed at reading the original post =P haha

Rob at Summerfield Engineering in Baldivis: (08) 9459 1078

They have a few names, most commonly "5 Slot" or "Chev Rally" rims. Commonly found on the Camaro etc as well as older f100s.

The actual RIM (steel band) is ROH too.


Sorry for being old enough to remember when every man and his HQ wanted real rally wheels, thought you might of chopped up something good to make them messy rims
Author:  Chopz [ Tue Nov 09, 2010 9:46 am ]
Post subject:  Re: PERTH: Custom Rims!
So $198 all up, per rim, plus the cost of the rim as well?
Author:  Fatzook [ Tue Nov 09, 2010 9:49 am ]
Post subject:  Re: PERTH: Custom Rims!
royce wrote:
alien wrote:
royce you failed at reading the original post =P haha

Rob at Summerfield Engineering in Baldivis: (08) 9459 1078

They have a few names, most commonly "5 Slot" or "Chev Rally" rims. Commonly found on the Camaro etc as well as older f100s.

The actual RIM (steel band) is ROH too.


Sorry for being old enough to remember when every man and his HQ wanted real rally wheels, thought you might of chopped up something good to make them messy rims


Yeah I've never been a fan of those wheel centres either. And for $200/ rim, surely it would have been worth getting the procomps :?
Author:  matty87 [ Tue Nov 09, 2010 10:10 am ]
Post subject:  Re: PERTH: Custom Rims!
A mate had some rims cut and flipped and played with for our trailer rig not entirly sure of the details but was a good job and not to spenno. either. we already had the rims tho.
Author:  Chopz [ Tue Nov 09, 2010 10:37 am ]
Post subject:  Re: PERTH: Custom Rims!
Fatzook wrote:
royce wrote:
alien wrote:
royce you failed at reading the original post =P haha

Rob at Summerfield Engineering in Baldivis: (08) 9459 1078

They have a few names, most commonly "5 Slot" or "Chev Rally" rims. Commonly found on the Camaro etc as well as older f100s.

The actual RIM (steel band) is ROH too.


Sorry for being old enough to remember when every man and his HQ wanted real rally wheels, thought you might of chopped up something good to make them messy rims


Yeah I've never been a fan of those wheel centres either. And for $200/ rim, surely it would have been worth getting the procomps :?



thats what i thought

i got a price on 4 15x8 chrome eagle alloys with a -30mm offset from the states at $418 for the rims, plus $160 for postage, delivered to the door
Author:  Joe [ Tue Nov 09, 2010 10:38 am ]
Post subject:  Re: PERTH: Custom Rims!
Chopz wrote:
Fatzook wrote:
royce wrote:
alien wrote:
royce you failed at reading the original post =P haha

Rob at Summerfield Engineering in Baldivis: (08) 9459 1078

They have a few names, most commonly "5 Slot" or "Chev Rally" rims. Commonly found on the Camaro etc as well as older f100s.

The actual RIM (steel band) is ROH too.


Sorry for being old enough to remember when every man and his HQ wanted real rally wheels, thought you might of chopped up something good to make them messy rims


Yeah I've never been a fan of those wheel centres either. And for $200/ rim, surely it would have been worth getting the procomps :?



thats what i thought

i got a price on 4 15x8 chrome eagle alloys with a -30mm offset from the states at $418 for the rims, plus $160 for postage, delivered to the door


8O For four rims :?
Author:  MrRocky [ Tue Nov 09, 2010 10:47 am ]
Post subject:  Re: PERTH: Custom Rims!
my eagle alloys cost me $360 a rim from 4x4 usa a few years ago and i havent seen another set in perth on a sierra yet.
Coincidentally iam selling them atm with 31's.
Image
Author:  smiffkid [ Tue Nov 09, 2010 11:50 am ]
Post subject:  Re: PERTH: Custom Rims!
lucky you didn get procomps,
we have had heaps into work, bending easily and just not a very well made rim, hard to balance and what not.
also procomp is getting very messy with there products lately, takin 6 months for a set of tires and then once they get here there the wrong 1s.
Author:  alien [ Tue Nov 09, 2010 12:09 pm ]
Post subject:  Re: PERTH: Custom Rims!
i've still got procomps on order... they will be fine for my winter tyres.

red89 - as others have said, $148ea all inclusive per rim to be made, then $50ea for sand/prime/paint for a $198 total per rim - which i think is great for a complete custom job.
Author:  bakerboy [ Tue Nov 09, 2010 12:43 pm ]
Post subject:  Re: PERTH: Custom Rims!
matty87 wrote:
A mate had some rims cut and flipped and played with for our trailer rig not entirly sure of the details but was a good job and not to spenno. either. we already had the rims tho.


Yep I got them done at the same place alien went, I got it done for $60 a rim hahahahaha, not painted but dilligaf
Author:  Chopz [ Tue Nov 09, 2010 2:00 pm ]
Post subject:  Re: PERTH: Custom Rims!
Joe wrote:
Chopz wrote:
Fatzook wrote:
royce wrote:
alien wrote:
royce you failed at reading the original post =P haha

Rob at Summerfield Engineering in Baldivis: (08) 9459 1078

They have a few names, most commonly "5 Slot" or "Chev Rally" rims. Commonly found on the Camaro etc as well as older f100s.

The actual RIM (steel band) is ROH too.


Sorry for being old enough to remember when every man and his HQ wanted real rally wheels, thought you might of chopped up something good to make them messy rims


Yeah I've never been a fan of those wheel centres either. And for $200/ rim, surely it would have been worth getting the procomps :?



thats what i thought

i got a price on 4 15x8 chrome eagle alloys with a -30mm offset from the states at $418 for the rims, plus $160 for postage, delivered to the door


8O For four rims :?


yeah mate, 4 rims.

Can PM ya the link if ya like
Author:  Joe [ Tue Nov 09, 2010 10:18 pm ]
Post subject:  Re: PERTH: Custom Rims!
Chopz wrote:
Joe wrote:
Chopz wrote:
Fatzook wrote:
royce wrote:
alien wrote:
royce you failed at reading the original post =P haha

Rob at Summerfield Engineering in Baldivis: (08) 9459 1078

They have a few names, most commonly "5 Slot" or "Chev Rally" rims. Commonly found on the Camaro etc as well as older f100s.

The actual RIM (steel band) is ROH too.


Sorry for being old enough to remember when every man and his HQ wanted real rally wheels, thought you might of chopped up something good to make them messy rims


Yeah I've never been a fan of those wheel centres either. And for $200/ rim, surely it would have been worth getting the procomps :?



thats what i thought

i got a price on 4 15x8 chrome eagle alloys with a -30mm offset from the states at $418 for the rims, plus $160 for postage, delivered to the door


8O For four rims :?


yeah mate, 4 rims.

Can PM ya the link if ya like


Yes please :P
Author:  alien [ Wed Nov 10, 2010 5:35 am ]
Post subject:  Re: PERTH: Custom Rims!
hahaha you'll never believe what happened this morning... mounted the tyres to the rims, balanced it all up, took off a back wheel and... CLUNK! wheel centre is too small to fit over the hub!!! DOH!

Its ok though - Rob is going to bore them out monday. He was pretty embarrased =) haha
Author:  Fatzook [ Wed Nov 10, 2010 6:08 am ]
Post subject:  Re: PERTH: Custom Rims!
And what about the powdercoating?
Author:  alien [ Wed Nov 10, 2010 6:24 am ]
Post subject:  Re: PERTH: Custom Rims!
its only the center hole being bored out - ill rustguard it - hopefully the powdercoat doesnt chip!
Author:  Red89 [ Wed Nov 10, 2010 7:01 am ]
Post subject:  Re: PERTH: Custom Rims!
alien wrote:
i've still got procomps on order... they will be fine for my winter tyres.

red89 - as others have said, $148ea all inclusive per rim to be made, then $50ea for sand/prime/paint for a $198 total per rim - which i think is great for a complete custom job.

Yer thats about what I would expect to pay for a fully custom rim, I'll already have the rim just need the backspace redone.
Author:  Bucket [ Wed Nov 10, 2010 8:42 am ]
Post subject:  Re: PERTH: Custom Rims!
smiffkid wrote:
lucky you didn get procomps,
we have had heaps into work, bending easily and just not a very well made rim, hard to balance and what not.
also procomp is getting very messy with there products lately, takin 6 months for a set of tires and then once they get here there the wrong 1s.


Maybe you got a bad batch?? We sell heaps of procomp tyres and rims. In the past 3 months we've returned 1 set of tyres that were supposedly part of a bad batch.

The procomp alloys look awesome!
Author:  alien [ Wed Nov 10, 2010 9:18 am ]
Post subject:  Re: PERTH: Custom Rims!
i still cant work out alloys... theres next to no weight saving and theyre easier to chip/crack. unless its purely for looks?
Author:  Joe [ Wed Nov 10, 2010 9:26 am ]
Post subject:  Re: PERTH: Custom Rims!
alien wrote:
i still cant work out alloys... theres next to no weight saving and theyre easier to chip/crack. unless its purely for looks?


alien wrote:
purely for looks?


:wink:
Author:  Bucket [ Wed Nov 10, 2010 9:50 am ]
Post subject:  Re: PERTH: Custom Rims!
They're just as robust. I've seen more bent steelies then I have alloys.
Author:  matty87 [ Wed Nov 10, 2010 9:59 am ]
Post subject:  Re: PERTH: Custom Rims!
more steelys out there to bend
Author:  steak_knife [ Wed Nov 10, 2010 10:02 am ]
Post subject:  Re: PERTH: Custom Rims!
matty87 wrote:
more steelys out there to bend


& people with alloy's tend to take a lil more care..

but in saying that, Jas has alloy & he goes anywhere.. :lol: :P
Page 1 of 3 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/