auszookers.com
https://auszookers.com/forum/

235's On Jimny With 2inch lift
https://auszookers.com/forum/viewtopic.php?f=5&t=16625		 Page 1 of 1
Author:  Mubby [ Tue Nov 09, 2010 11:11 pm ]
Post subject:  235's On Jimny With 2inch lift
Hey just wanting peoples opinions on the power loss by putting the 235's on a jimny, and also how much they scrape and where with just a 2 nich lift, and if people have modified the wheel arches somehow to accomadate the 235's under a 2 inch lift? Thanks Mubby!
Author:  Choppy [ Tue Nov 09, 2010 11:58 pm ]
Post subject:  Re: 235's On Jimny With 2inch lift
ask zukenutter he has the same ters as me 235/75 federal couragias on his jim, his modded his guards but i dont know whether it is necessary or not in terms of scrubbing
Author:  dm90 [ Wed Nov 10, 2010 12:12 am ]
Post subject:  Re: 235's On Jimny With 2inch lift
hey mate

you are gonna need to trim guards for sure, and you will also have to cut your ARB bar up a bit

check this out mate, might give ya some help.

http://www.bigjimny.com/index.php?optio ... &Itemid=61

there is an article there on how to trim the guards along with heaps of other good shit

but also ask zukenutter, he knows his shit
Author:  zukenutter [ Fri Nov 12, 2010 7:26 pm ]
Post subject:  Re: 235's On Jimny With 2inch lift
dm90 wrote:
hey mate

you are gonna need to trim guards for sure, and you will also have to cut your ARB bar up a bit

check this out mate, might give ya some help.

http://www.bigjimny.com/index.php?optio ... &Itemid=61

there is an article there on how to trim the guards along with heaps of other good shit

but also ask zukenutter, he knows his shit


Haha, thousands would argue that... thanks though :D

It's all just been trial and error. Nobody knew or wanted to know anything about Jimnys when I got mine.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/