| auszookers.com https://auszookers.com/forum/ |
|
| ga16ba conversion into seirra https://auszookers.com/forum/viewtopic.php?f=5&t=16773 |
Page 1 of 1 |
| Author: | outram [ Sun Nov 14, 2010 11:07 pm ] |
| Post subject: | ga16ba conversion into seirra |
hey guys just wonted to no how hard it is to put a ga16b motor into a seirra any advice welcome cheers |
|
| Author: | 5ierra [ Sun Nov 14, 2010 11:09 pm ] |
| Post subject: | Re: ga16ba conversion into seirra |
use the search function, there are 900 000 000 threads on this, we dont need another. |
|
| Author: | SuziBlu [ Sun Nov 14, 2010 11:14 pm ] |
| Post subject: | Re: ga16ba conversion into seirra |
5ierra wrote: use the search function, there are 900 000 000 threads on this, we dont need another.
Help out or refrain from shit replies. |
|
| Author: | SuziBlu [ Sun Nov 14, 2010 11:21 pm ] |
| Post subject: | Re: ga16ba conversion into seirra |
I suk at searching via the search button, so I had a look around, have a read of this besides being a ripper build, it also speaks of engines. |
|
| Author: | Ben_Sierra [ Sun Nov 14, 2010 11:24 pm ] |
| Post subject: | Re: ga16ba conversion into seirra |
Just to confirm, by ga16ba, do you acctually mean g16a or g16b? Cos there's a big difference between the two... |
|
| Author: | SuziBlu [ Sun Nov 14, 2010 11:30 pm ] |
| Post subject: | Re: ga16ba conversion into seirra |
Ben, I have never done it, but arn't they the same in regards the nuts and bolt side, BeT kit, an reposition mounts, thats about it, then all the fancy stuff. |
|
| Author: | JrZook [ Sun Nov 14, 2010 11:30 pm ] |
| Post subject: | Re: ga16ba conversion into seirra |
outram wrote: hey guys just wonted to no how hard it is to put a ga16b motor into a seirra any advice welcome cheers
Not too hard at all. U'll need an adapter plate between the engine and gearbox (BenT off this forum makes a nice one). If its a G16 carby engine you will just have to modify the stock 1.3 carby hat to suit. If its the EFI version u'll need a high pressure fuel pump, some high pressure fuel hoses and a bit of wiring work. Dan |
|
| Author: | atari4x4 [ Sun Nov 14, 2010 11:32 pm ] |
| Post subject: | Re: ga16ba conversion into seirra |
zookernator did a write up in the tech articles but i can't get to it... EDIT: found it http://auszookers.com/index.php?name=Fo ... hlight=vss |
|
| Author: | SuziBlu [ Sun Nov 14, 2010 11:45 pm ] |
| Post subject: | Re: ga16ba conversion into seirra |
Crikey, I looked for that, how did u find it. Me and search button hate each other. |
|
| Author: | atari4x4 [ Sun Nov 14, 2010 11:53 pm ] |
| Post subject: | Re: ga16ba conversion into seirra |
SuziBlu wrote: Crikey, I looked for that, how did u find it.
Me and search button hate each other. Don't be a hater, teh search works well, i was sure it was in the tech articles but couldn't get to it or find it so i searched for "g16" & "threads" by "zookernator" knowing the author helps cut it right down to a couple of threads. |
|
| Author: | SuziBlu [ Mon Nov 15, 2010 12:00 am ] |
| Post subject: | Re: ga16ba conversion into seirra |
lol knowing the words to use helps a lot, I didnt try the search, as it hates me, but I would have tried something like, g16 into sierra or 1.3 to 1.6 engine swap, whatever, and gotten no results. |
|
| Author: | Ben_Sierra [ Mon Nov 15, 2010 12:03 am ] |
| Post subject: | Re: ga16ba conversion into seirra |
SuziBlu wrote: Ben, I have never done it, but arn't they the same in regards the nuts and bolt side, BeT kit, an reposition mounts, thats about it, then all the fancy stuff.
Its all the fancy stuff thats different... To go EFI you gotta do all the wiring, fuel system etc etc. A lot more work than bolting a carby motor in 
|
|
| Author: | atari4x4 [ Mon Nov 15, 2010 12:04 am ] |
| Post subject: | Re: ga16ba conversion into seirra |
Sometimes more is less, especially if you know that thread exists. really this dribble should be in the Grimbo & the search function thread. Sorry outram for taking this slightly off topic, have a read thru Zookernators write up & let us know if you need more info. Are you wanting to go EFI or stick with the carby 1.6? |
|
| Author: | BlueSuzy [ Mon Nov 15, 2010 12:13 am ] |
| Post subject: | Re: ga16ba conversion into seirra |
Another G16B option http://www.auszookers.com/index.php?nam ... 23&start=0 |
|
| Author: | steak_knife [ Mon Nov 15, 2010 9:16 am ] |
| Post subject: | Re: ga16ba conversion into seirra |
Kind of on this note, does anyone know if the vit flying wheel is solid steel or cast?? |
|
| Author: | zooky08 [ Mon Nov 15, 2010 10:22 am ] |
| Post subject: | Re: ga16ba conversion into seirra |
steel im pretty sure steaky |
|
| Author: | BenT [ Tue Nov 16, 2010 7:51 am ] |
| Post subject: | Re: ga16ba conversion into seirra |
steak_knife wrote: Kind of on this note, does anyone know if the vit flying wheel is solid steel or cast??
The ones I have seen are a machined casting, same as the Sierra, and will probably be cast iron, not cast steel. Ben |
|
| Author: | steak_knife [ Tue Nov 16, 2010 7:59 am ] |
| Post subject: | Re: ga16ba conversion into seirra |
BenT wrote: steak_knife wrote: Kind of on this note, does anyone know if the vit flying wheel is solid steel or cast?? The ones I have seen are a machined casting, same as the Sierra, and will probably be cast iron, not cast steel. Ben Cheer's.. So lightening's not an option..May have to get one made.. |
|
| Author: | BenT [ Tue Nov 16, 2010 8:11 am ] |
| Post subject: | Re: ga16ba conversion into seirra |
Your not going all ricer on us are you Stekky? Why you want lighter? Usually heavier makes for nicer offroading. Ben |
|
| Author: | steak_knife [ Tue Nov 16, 2010 8:28 am ] |
| Post subject: | Re: ga16ba conversion into seirra |
BenT wrote: Your not going all ricer on us are you Stekky? Why you want lighter? Usually heavier makes for nicer offroading.
Ben  F*#k NO!!!!!
Just a theory, I'm getting a vit box to go into Sully & don't want to loose the quick rev's of having the sierra flying wheel on the 1.6 but want the bigger clutch.. 
|
|
| Author: | Damo [ Tue Nov 16, 2010 8:36 am ] |
| Post subject: | Re: ga16ba conversion into seirra |
steak_knife wrote: BenT wrote: Your not going all ricer on us are you Stekky? Why you want lighter? Usually heavier makes for nicer offroading. Ben F*#k NO!!!!! Just a theory, I'm getting a vit box to go into Sully & don't want to loose the quick rev's of having the sierra flying wheel on the 1.6 but want the bigger clutch.. Do us a favour and weigh the Vit flywheel and the Sierra flywheel. I bet the Vit one is a fackload heavier. BTW, why can't you machine a cast iron flywheel? |
|
| Author: | steak_knife [ Tue Nov 16, 2010 8:46 am ] |
| Post subject: | Re: ga16ba conversion into seirra |
Damo wrote: Do us a favour and weigh the Vit flywheel and the Sierra flywheel. I bet the Vit one is a fackload heavier.
BTW, why can't you machine a cast iron flywheel? You can, but if you lighten em to much that explode..just a lil bit.
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|