Need to know will re positioning this (filter?) hear cause any proplems
(hilighted in red)
thanks in advance
scott
| auszookers.com https://auszookers.com/forum/ |
|
| Question on vitara tank https://auszookers.com/forum/viewtopic.php?f=5&t=16821 |
Page 1 of 1 |
| Author: | sbbunno [ Tue Nov 16, 2010 5:24 am ] |
| Post subject: | Question on vitara tank |
Need to know will re positioning this (filter?) hear cause any proplems (hilighted in red)
thanks in advance scott |
|
| Author: | sbbunno [ Tue Nov 16, 2010 5:37 am ] |
| Post subject: | Re: Question on vitara tank |
if i can find this out soon i can posibly finish what im doing and get my diff in thursday/fri |
|
| Author: | steak_knife [ Tue Nov 16, 2010 6:05 am ] |
| Post subject: | Re: Question on vitara tank |
Follow line C, it run's through that expansion chamber, the sierra has one up near the filler, so you can get rid of that one & run the hose from the tant to the sierra chamber..  Ok??
|
|
| Author: | Fatzook [ Tue Nov 16, 2010 6:07 am ] |
| Post subject: | Re: Question on vitara tank |
Its a vapour tank. Move it wherever you like. It barely does anything 
|
|
| Author: | steak_knife [ Tue Nov 16, 2010 6:13 am ] |
| Post subject: | Re: Question on vitara tank |
Fatzook wrote: Its a vapour tank. Move it wherever you like. It barely does anything
Sierra's already got one..
|
|
| Author: | sbbunno [ Tue Nov 16, 2010 6:20 am ] |
| Post subject: | Re: Question on vitara tank |
so i can make line c go straight to the tank? |
|
| Author: | steak_knife [ Tue Nov 16, 2010 6:27 am ] |
| Post subject: | Re: Question on vitara tank |
sbbunno wrote: so i can make line c go straight to the tank?
If by tank you mean the lil white one up by the sierra filler, than yes, if you mean into the fuel tank, then NO... |
|
| Author: | sbbunno [ Tue Nov 16, 2010 7:11 am ] |
| Post subject: | Re: Question on vitara tank |
steak_knife wrote: sbbunno wrote: so i can make line c go straight to the tank? If by tank you mean the lil white one up by the sierra filler, than yes, if you mean into the fuel tank, then NO... yea sory bout that haha rushin a bit ok that makes life alot easy'er tanks mounted up the only prop i got is the filler lead is right next to the inside of the chassis guess i gotta fiddle round for some fine tuning thanks |
|
| Author: | steak_knife [ Tue Nov 16, 2010 7:18 am ] |
| Post subject: | Re: Question on vitara tank |
sbbunno wrote: steak_knife wrote: sbbunno wrote: so i can make line c go straight to the tank? If by tank you mean the lil white one up by the sierra filler, than yes, if you mean into the fuel tank, then NO... yea sory bout that haha rushin a bit ok that makes life alot easy'er tanks mounted up the only prop i got is the filler lead is right next to the inside of the chassis guess i gotta fiddle round for some fine tuning thanks I'd like some pic's, I've been thinking of going through the floor on the other side of the rail & making a new cover for the filler.. |
|
| Author: | sbbunno [ Tue Nov 16, 2010 7:23 am ] |
| Post subject: | Re: Question on vitara tank |
iv still gotta weld one o the mounts but will get pics up soon off the hosses |
|
| Author: | steak_knife [ Tue Nov 16, 2010 7:25 am ] |
| Post subject: | Re: Question on vitara tank |
Mainly interested in the filler hose....
|
|
| Author: | sbbunno [ Tue Nov 16, 2010 7:40 am ] |
| Post subject: | Re: Question on vitara tank |
sorry for the crapola quality its the only camera i could fined and not to mention it ran out o battery as i took it. but still better than nothing 
|
|
| Author: | sbbunno [ Tue Nov 16, 2010 7:41 am ] |
| Post subject: | Re: Question on vitara tank |
will have to be tomorrow when dad comes back with the camera then ill get some good pics up |
|
| Author: | steak_knife [ Tue Nov 16, 2010 7:47 am ] |
| Post subject: | Re: Question on vitara tank |
That white plastic thingy can come out to, it's an anti splash/siphon thingy.. Is that as far to the passenger side you can go? I seem to remember having a lil more room than that.. Was thinking of giving the tank just above the filler a lil love with a hammer to bring the filler neck more upright to allow the hose to go on a lil straighter.. Key there is a LITTLE love, just like the body's the tank's are very thin.. |
|
| Author: | sbbunno [ Tue Nov 16, 2010 7:54 am ] |
| Post subject: | Re: Question on vitara tank |
oh yea LITTLE love aint such a bad idea thats as far as i can go with out cutting off all the origanal mounts and putting more on (witch i DONT really wont to do) |
|
| Author: | steak_knife [ Tue Nov 16, 2010 8:00 am ] |
| Post subject: | Re: Question on vitara tank |
sbbunno wrote: oh yea LITTLE love aint such a bad idea
thats as far as i can go with out cutting off all the origanal mounts and putting more on (witch i DONT really wont to do)  It bolt's in????????????????
|
|
| Author: | sbbunno [ Tue Nov 16, 2010 8:04 am ] |
| Post subject: | Re: Question on vitara tank |
i cut rear passenger side mount, removed the vapour thingy and drilled both the front holes 10mm to drivers side and put a spacer on the front passenger side 
still gotta make another rear passenger 
|
|
| Author: | steak_knife [ Tue Nov 16, 2010 8:09 am ] |
| Post subject: | Re: Question on vitara tank |
kinda sound's like what I did when I had it fitted to Buttercup. Mine the Efi swb vit tho, slightly different tank.. |
|
| Author: | sbbunno [ Tue Nov 16, 2010 8:13 am ] |
| Post subject: | Re: Question on vitara tank |
bit doge but dose the job fine 
a bit of lovin gonna have to happen i think, ill do it tommorow though and get some pics up. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|