check out this thread
http://www.downunder4x4.net/forum/viewtopic.php?t=2366
| auszookers.com https://auszookers.com/forum/ |
|
| virtual lift https://auszookers.com/forum/viewtopic.php?f=5&t=169 |
Page 1 of 1 |
| Author: | oscar [ Sat Jul 22, 2006 4:17 pm ] |
| Post subject: | virtual lift |
i took of my front left flare this morning to have a look at what iam going to need to do. with the flare off there is a L bracket spot welded all the way around that the flare bolts onto. Do i cut off the spot welds holding on the L bracket so i can cut and bend? And how far should i cut? Or are there any other things i need to do. Oscar. |
|
| Author: | steve [ Sat Jul 22, 2006 4:33 pm ] |
| Post subject: | Re: virtual lift |
check out this thread http://www.downunder4x4.net/forum/viewtopic.php?t=2366
|
|
| Author: | oscar [ Sat Jul 22, 2006 4:36 pm ] |
| Post subject: | Re: virtual lift |
thanks steve |
|
| Author: | steve [ Sat Jul 22, 2006 4:40 pm ] |
| Post subject: | Re: virtual lift |
oh, here's another link with more info. http://www.geocities.com/redidbull1/wheelwells.html |
|
| Author: | Nev08 [ Sun Jul 23, 2006 1:47 am ] |
| Post subject: | Re: virtual lift |
yeh this bloke did a good job on his hardtop...im still not game so ill wait and see how urs turns out oscar and then get some pointers 
|
|
| Author: | oscar [ Sun Jul 23, 2006 6:11 am ] |
| Post subject: | Re: virtual lift |
well nev iam going to give mine a couple runs to see if its needed. if it needs it i dont see any dramas as i work next door to panel beaters who have all the tools needed. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|