auszookers.com
https://auszookers.com/forum/

JDM Bonnets
https://auszookers.com/forum/viewtopic.php?f=5&t=16953		 Page 1 of 1
Author:  MR1JZ [ Sun Nov 21, 2010 8:38 pm ]
Post subject:  JDM Bonnets
I was recently in Japan for a couple of weeks and saw a lot of zooks while I was over there, they are a very popular kei car over there with the F6 660cc turbo motor.

I noticed that their bonnets have a cool little scoop on them.

Me and a few mates where over there for a party/drifting holiday and we are bringing back a container of parts from our drift cars.

I think those bonnets look really cool and wouldnt mind one for my zook...does anyone know if they will fit?

They look like they will...also would there be any interest in them to buy?

If there is I will get a couple extra and move them on cheaply to help some zook owners out

Here is what they look like:

Image
Image
Author:  want33s [ Sun Nov 21, 2010 8:48 pm ]
Post subject:  Re: JDM Bonnets
They are a 1.0 bonnet that doesn't have the "power bulge" in the middle like 1.3 bonnets do.
It will bolt on and line up on a 1.3 but won't shut as it'll hit the radiator.
Don't worry about bonnets, bring back power steer boxes and F6A turbo motors/gearboxes.
Author:  Zook_Fan [ Sun Nov 21, 2010 9:00 pm ]
Post subject:  Re: JDM Bonnets
you could just take the scoop off and put it on a 1L bonnet over here for the same effect and with the space you saved stick as many sierra powersteering boxes that you can find in there
Author:  MR1JZ [ Sun Nov 21, 2010 9:22 pm ]
Post subject:  Re: JDM Bonnets
Ahhh ok thanks guys
I'll see what I can find re motors and gearboxes...I take it they are good?
Author:  2stroker [ Sun Nov 21, 2010 10:03 pm ]
Post subject:  Re: JDM Bonnets
You would have a limited market for the engine and gearbox but would have lots of buyers for cheap power steer set ups. The only thing is that the pump brackets would not suit our engines.

Those F6a engines only make about 45kw, the real benifit is they are tiny and light, perfect in an LJ, they also have a 5 speed gearbox and a transfer box that is lower ratio than a 1 litre box

Early 1 Litre transfer is 1.590 and 2.558

Switch 1 litre transfer is 1.580 and 2.511

F6a transfer is 1.741 and 3.052
Author:  Ben_Sierra [ Sun Nov 21, 2010 11:20 pm ]
Post subject:  Re: JDM Bonnets
I'd take an F6A... It'd go perfectly in the mighty boy project I've been thinking about for a while...
Author:  MR1JZ [ Mon Nov 22, 2010 12:15 am ]
Post subject:  Re: JDM Bonnets
Those f6 motors are worth a packet...no way I'm bringing any in...I'll see what I can find in regards to steering boxes
Author:  303zuke [ Mon Nov 22, 2010 6:51 am ]
Post subject:  Re: JDM Bonnets
2stroker wrote:
You would have a limited market for the engine and gearbox but would have lots of buyers for cheap power steer set ups. The only thing is that the pump brackets would not suit our engines.

Those F6a engines only make about 45kw, the real benifit is they are tiny and light, perfect in an LJ, they also have a 5 speed gearbox and a transfer box that is lower ratio than a 1 litre box

Early 1 Litre transfer is 1.590 and 2.558

Switch 1 litre transfer is 1.580 and 2.511

F6a transfer is 1.741 and 3.052


If you do get the engines, make sure you get the ECU and loom with them. As the pump brackets are for an F series motor, would they fit an F10A? Would you still have an F10A if you could replace it with an F6A?? :)

MR1JZ, What packet are the engines worth? Your idea of too expensive might not be our idea.

Where did you find those transfer ratios, 2Stroker? The only reference I have is for the later 660, and it shows Coily t/case ratios:
Author:  MR1JZ [ Mon Nov 22, 2010 7:12 am ]
Post subject:  Re: JDM Bonnets
Looking at 2500 AUD for a motor and box landed in adelaide
Author:  bazook [ Mon Nov 22, 2010 7:17 am ]
Post subject:  Re: JDM Bonnets
even if the brackets don't fit i think someone here will make a post or diy for them, so bring them in 8) 8)
Author:  MR1JZ [ Mon Nov 22, 2010 7:20 am ]
Post subject:  Re: JDM Bonnets
I'm not outlaying without a deposit
Author:  want33s [ Mon Nov 22, 2010 8:26 am ]
Post subject:  Re: JDM Bonnets
MR1JZ wrote:
Looking at 2500 AUD for a motor and box landed in adelaide

In a container???
Author:  atari4x4 [ Mon Nov 22, 2010 8:34 am ]
Post subject:  Re: JDM Bonnets
while you're over there find me some deep dish 16x7 watanabee's in a zook bolt pattern. :wink:
Author:  MR1JZ [ Mon Nov 22, 2010 8:36 am ]
Post subject:  Re: JDM Bonnets
want33s wrote:
MR1JZ wrote:
Looking at 2500 AUD for a motor and box landed in adelaide

In a container???


Yeah man...gonna be around 150,000 jpy to buy the motor and box ten another 70,000 to get it shipped here plus duties and loading fees
Author:  Fatzook [ Mon Nov 22, 2010 9:03 am ]
Post subject:  Re: JDM Bonnets
MR1JZ wrote:
want33s wrote:
MR1JZ wrote:
Looking at 2500 AUD for a motor and box landed in adelaide

In a container???


Yeah man...gonna be around 150,000 jpy to buy the motor and box ten another 70,000 to get it shipped here plus duties and loading fees


Where are you getting those prices?
Author:  jonno_racing [ Mon Nov 22, 2010 9:27 am ]
Post subject:  Re: JDM Bonnets
atari4x4 wrote:
while you're over there find me some deep dish 16x7 watanabee's in a zook bolt pattern. :wink:


x2 but i will have 15x7s
Author:  MR1JZ [ Mon Nov 22, 2010 9:36 am ]
Post subject:  Re: JDM Bonnets
Fatzook wrote:
MR1JZ wrote:
want33s wrote:
MR1JZ wrote:
Looking at 2500 AUD for a motor and box landed in adelaide

In a container???


Yeah man...gonna be around 150,000 jpy to buy the motor and box ten another 70,000 to get it shipped here plus duties and loading fees


Where are you getting those prices?


Yahoo
Author:  Fatzook [ Mon Nov 22, 2010 9:41 am ]
Post subject:  Re: JDM Bonnets
MR1JZ wrote:
Fatzook wrote:
MR1JZ wrote:
want33s wrote:
MR1JZ wrote:
Looking at 2500 AUD for a motor and box landed in adelaide

In a container???


Yeah man...gonna be around 150,000 jpy to buy the motor and box ten another 70,000 to get it shipped here plus duties and loading fees


Where are you getting those prices?


Yahoo


Right. You'll get them HEAPS cheaper if you search the unlisted back streets for wreckers. Thats if you can find a front cut/ motor etc over there. They melt most of the jimny shit down once its wrecked, cos its not a high value item. :(
Author:  MR1JZ [ Mon Nov 22, 2010 9:47 am ]
Post subject:  Re: JDM Bonnets
I'm back here now so I don't have access to anything but yahoo unfortunately
Author:  Fatzook [ Mon Nov 22, 2010 9:50 am ]
Post subject:  Re: JDM Bonnets
MR1JZ wrote:
I'm back here now so I don't have access to anything but yahoo unfortunately


Yeah those online auction prices are insane when compared to the unlisted back street wreckers over there.

My mate wants to fly over, BUY a small truck for a few $K and just drive around picking sweet cuts from the hundreds of random wrecking yards till he has filled 2 40"ers. I said I'd help as long as I get to throw in a few G16's, F6's and K6's :please:

Fuck that skyline rubbish :roll:
Author:  atari4x4 [ Mon Nov 22, 2010 9:52 am ]
Post subject:  Re: JDM Bonnets
jonno_racing wrote:
atari4x4 wrote:
while you're over there find me some deep dish 16x7 watanabee's in a zook bolt pattern. :wink:


x2 but i will have 15x7s


i thought being a coily driver you'd be wanting something more like this? :lol:

Image
Author:  Fatzook [ Mon Nov 22, 2010 9:54 am ]
Post subject:  Re: JDM Bonnets
atari4x4 wrote:
jonno_racing wrote:
atari4x4 wrote:
while you're over there find me some deep dish 16x7 watanabee's in a zook bolt pattern. :wink:


x2 but i will have 15x7s


i thought being a coily driver you'd be wanting something more like this? :lol:

Image


:rofl: :rofl: :rofl:
Author:  Chop [ Mon Nov 22, 2010 9:54 am ]
Post subject:  Re: JDM Bonnets
yess!! :rofl:

chop
Author:  MR1JZ [ Mon Nov 22, 2010 9:58 am ]
Post subject:  Re: JDM Bonnets
And another thread ruined with the dick wheels...ever since the dawn of the internets car forums have seen such an event

And every time it still makes me laughed
Author:  atari4x4 [ Mon Nov 22, 2010 10:01 am ]
Post subject:  Re: JDM Bonnets
sorry MR1JZ, cockrims bring the lol'z

let me know next time you head over.... would be keen for some rims. :wink:
Author:  2stroker [ Mon Nov 22, 2010 10:09 am ]
Post subject:  Re: JDM Bonnets
Yeah 303zuke the ratios I quoted were actually from a 550 2 stroke sierra not an F6a turbo

Image
Author:  MR1JZ [ Mon Nov 22, 2010 10:18 am ]
Post subject:  Re: JDM Bonnets
Next nov I'm going back I'll grab a couple cool sets of suzi rims
Author:  atari4x4 [ Mon Nov 22, 2010 10:26 am ]
Post subject:  Re: JDM Bonnets
Armsup
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/