auszookers.com
https://auszookers.com/forum/

Vitara bullbar
https://auszookers.com/forum/viewtopic.php?f=5&t=17005		 Page 1 of 1
Author:  jono165 [ Tue Nov 23, 2010 8:25 pm ]
Post subject:  Vitara bullbar
Hi I am looking at getting a 2nd hand arb bar fr my vitara but just want to check that one off a 91 swb will fit a 96 swb. Are the mounts any different?

Also on a sidenote has anyone else used e-go as a courier and have positive feedback for them?

Cheers
Jono
Author:  Fatzook [ Tue Nov 23, 2010 10:32 pm ]
Post subject:  Re: Vitara bullbar
jono165 wrote:
Hi I am looking at getting a 2nd hand arb bar fr my vitara but just want to check that one off a 91 swb will fit a 96 swb. Are the mounts any different?

Also on a sidenote has anyone else used e-go as a courier and have positive feedback for them?

Cheers
Jono


I use them for everything. 40 or so items sent with them so far. Not one drama yet. 8)
Author:  atari4x4 [ Tue Nov 23, 2010 10:58 pm ]
Post subject:  Re: Vitara bullbar
jono165 wrote:
Hi I am looking at getting a 2nd hand arb bar fr my vitara but just want to check that one off a 91 swb will fit a 96 swb. Are the mounts any different?

Also on a sidenote has anyone else used e-go as a courier and have positive feedback for them?

Cheers
Jono


Looking at my ARB price list, they list one for all of the SWB's & a different one for the LWB. The SWB part number is 3426010, not sure if it's actually stamped somewhere on the bar.
Author:  jono165 [ Tue Nov 23, 2010 11:25 pm ]
Post subject:  Re: Vitara bullbar
Thanks fatzook e-go sounds good I will give them a try.

Cheers atari that helps I might give arb a call and did out from them I know the towbars are different for early model swb but wasn't sure about bullbars.
Author:  Fatzook [ Tue Nov 23, 2010 11:52 pm ]
Post subject:  Re: Vitara bullbar
They may use the same bar but different mounting brackets.

I'd call and check with ARB before parting with the foldy stuff.
Author:  royce [ Tue Nov 23, 2010 11:54 pm ]
Post subject:  Re: Vitara bullbar
To the very best of my observation all 1.6 SWB vits are teh same chassis
Author:  Fatzook [ Tue Nov 23, 2010 11:56 pm ]
Post subject:  Re: Vitara bullbar
royce wrote:
To the very best of my observation all 1.6 SWB vits are teh same chassis


Inc X-90? I should know. I've owned 4 x-90 front cuts now. :roll:
Author:  royce [ Wed Nov 24, 2010 12:41 am ]
Post subject:  Re: Vitara bullbar
mine is essentially an X90 in a lot of areas, things like engine mounts appear to differ to earlier ones but the way the bar attaches seems to be the same as early ones
Author:  atari4x4 [ Wed Nov 24, 2010 1:34 am ]
Post subject:  Re: Vitara bullbar
now you say it i'm sure there is any early & late chassis, the early SWB's have the tube front cross member similar to the Sierra & I think the later SWB's were more like the LWB.

I'm trying to find some pics....
Author:  royce [ Wed Nov 24, 2010 1:54 am ]
Post subject:  Re: Vitara bullbar
mine is jan 96, so not many later 1.6 around and it is tube front

I remember seeing that there is 2 wagon chassis though, with ARB listing different bars
Author:  atari4x4 [ Wed Nov 24, 2010 1:56 am ]
Post subject:  Re: Vitara bullbar
that might be it then, if yours is tube then all of them will be tube as Polar_Bears carby SWB is also the same.
Author:  jono165 [ Wed Nov 24, 2010 5:04 am ]
Post subject:  Re: Vitara bullbar
Cheers guys,

Rang ARB they can confirm that their SWB bar will fit any SWB or if you buy a LWB bullbar it will fit any LWB (other than SV series)

They have 2 part numbers one being SWB the other LWB

Also rang a wreckers to ask as well The standard front bumpers are different. Up to 94 is one style then it changes for the later ones. But the way they mount to the chassis the same. It is the reinforcement and design of the plastic cover that change.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/