auszookers.com
https://auszookers.com/forum/

SJ50 Driveshafts WTF???
https://auszookers.com/forum/viewtopic.php?f=5&t=17008		 Page 1 of 1
Author:  JrZook [ Tue Nov 23, 2010 11:21 pm ]
Post subject:  SJ50 Driveshafts WTF???
So I have the earliest WT, a 88.5 SJ50 softy. Whats the go with the drive shaft flanges?

Long story short, I bought a spare set of WT (SJ70)driveshafts for it so I could overhaul them without having the car off the road and then do a quick 10min swap over. Anyway pressed in some nice new hardy spicer uni's into the spare jackshaft, pulled out the old shaft, slotted in the new one. WTF tcase flange is different (narrower) :? .

So the question is do the early WT SJ50's run all narrow track flange spacings? Tcase/diffs?

Dan
Author:  BlueSuzy [ Tue Nov 23, 2010 11:24 pm ]
Post subject:  Re: SJ50 Driveshafts WTF???
88' WT SJ50/51's run NT flanges and shafts

I found that out with my stock rare WT Lwb.
Author:  tanshi [ Tue Nov 23, 2010 11:30 pm ]
Post subject:  Re: SJ50 Driveshafts WTF???
some will and some wont.

its one of those suzui change over year things. they used up the old stock i reckon
Author:  JrZook [ Tue Nov 23, 2010 11:38 pm ]
Post subject:  Re: SJ50 Driveshafts WTF???
Mmmmmmmmmm change over years yay for me! So another question regarding diff flanges are they the same spacing as standard WT's? I do recall my old 85 zuk being able to use a WT rear shaft straight off.
Author:  tanshi [ Tue Nov 23, 2010 11:40 pm ]
Post subject:  Re: SJ50 Driveshafts WTF???
another change over thing.

n/ts had different flanges, but i am pretty sure if you have 3.7 diffs you will have w/t flanges
Author:  BlueSuzy [ Wed Nov 24, 2010 12:05 am ]
Post subject:  Re: SJ50 Driveshafts WTF???
My LWBWT had NT flanges all around. diffs, shafts, everything.

Could be worse..maruti..
Author:  joeblow [ Wed Nov 24, 2010 12:30 am ]
Post subject:  Re: SJ50 Driveshafts WTF???
suzuki went to the larger flanges when the vitara came out. they use the same unis etc, so it made sense to go to one part.
Author:  BlueSuzy [ Wed Nov 24, 2010 1:02 am ]
Post subject:  Re: SJ50 Driveshafts WTF???
joeblow wrote:
suzuki went to the larger flanges when the vitara came out. they use the same unis etc, so it made sense to go to one part.


Then it didnt make sense again with the jimnys..
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/