auszookers.com
https://auszookers.com/forum/

commo/hilux shocks and bumpstops
https://auszookers.com/forum/viewtopic.php?f=5&t=17266		 Page 1 of 1
Author:  Rossco [ Sat Dec 04, 2010 7:58 pm ]
Post subject:  commo/hilux shocks and bumpstops
Ok so I have been using the search function for two days positive there would be something on this topic but I have come up with nothing so here goes.

I'm going to redo the suspension in my WT sierra with commo and hilux shocks and I'm going to have to extend the bumpstops to suit. I'm about to put an order in with lowrange and I was looking at the bumpstop options that they offer. From what I have gathered from the threads that I have been reading, sierras use a 2 bolt style bumpstop? but I have no idea what the stock length is.
I'm pretty sure that I'm going to need at least a 25mm extension on top of the stock length. The only two bolt style bumpstop that lowrange sells is approximately 57mm total (conversion from inches). Will these be big enough? and if they are to big, can I just cut them down until they are the proper size?

I'm planning on removing leaves from the spring packs and running three leaves all around plus fitting the longer travel shocks, do I need to get some extended brake lines?

Thanks for your help :D
Author:  shep [ Sat Dec 04, 2010 8:09 pm ]
Post subject:  Re: commo/hilux shocks and bumpstops
on the front i just bolted the standard bumpstop to a piece of 30mm rhs which i then bolted to the standard bolt holes. doing it this way i was able to
move the bumpstop forward 50mm the same distance my diff my diff has been moved.
when i get around to it i will just weld a bit of rhs to the pad thing the rear bumpstops touch.
Author:  Rossco [ Sat Dec 04, 2010 8:20 pm ]
Post subject:  Re: commo/hilux shocks and bumpstops
so your just saying put a bit of bar under the bumpstop and run bolts all the way through? will this work for the back to? isn't the rear bumpstop on the diff?
Author:  shep [ Sat Dec 04, 2010 8:30 pm ]
Post subject:  Re: commo/hilux shocks and bumpstops
no, on the front i used RHS with 4 standard sized bolts ie bolted the bumpstop to the RHS
and then bolted the RHS to the original bumpstop mount. if you have moved
your diff forward you need to make sure that the bumpstop doesn't miss the diff.

on the rear just weld/bold a bit of RHS to the pad on the chassis that the bumpstop touches.

you can see the rear bumpstop
Image

front bumpstop.(ignore the brake line.)
Image
Author:  Rossco [ Sat Dec 04, 2010 8:56 pm ]
Post subject:  Re: commo/hilux shocks and bumpstops
alright. and excuse my ignorance here but what is RHS?
Author:  steak_knife [ Sat Dec 04, 2010 8:57 pm ]
Post subject:  Re: commo/hilux shocks and bumpstops
rsholzma wrote:
alright. and excuse my ignorance here but what is RHS?


really hard steel.. :P :roll:

Ok, rectangular hollow section..
Author:  Rossco [ Sat Dec 04, 2010 9:35 pm ]
Post subject:  Re: commo/hilux shocks and bumpstops
haha ok I see that now thanks steak knife. that bits sorted then. anyone on the brake lines?
Author:  steak_knife [ Sat Dec 04, 2010 9:39 pm ]
Post subject:  Re: commo/hilux shocks and bumpstops
shep wrote:

front bumpstop.(ignore the brake line.)
Image


:P

Or you could get a set of these..
http://www.lowrangeoffroad.com/suzuki/s ... lines.html
Author:  Rossco [ Sat Dec 04, 2010 10:53 pm ]
Post subject:  Re: commo/hilux shocks and bumpstops
Yup thats what I was looking at. thanks fellas for your help!
Author:  atari4x4 [ Sat Dec 04, 2010 11:00 pm ]
Post subject:  Re: commo/hilux shocks and bumpstops
steak_knife wrote:
rsholzma wrote:
alright. and excuse my ignorance here but what is RHS?


really hard steel.. :P :roll:

Ok, rectangular hollow section..


:rofl: @ joe & dm90 i think... :lol:
Author:  shep [ Sun Dec 05, 2010 3:11 am ]
Post subject:  Re: commo/hilux shocks and bumpstops
hay steak_knife the lowrange jobbies are not road legal in aus :wink:
Author:  ajsr [ Sun Dec 05, 2010 3:15 am ]
Post subject:  Re: commo/hilux shocks and bumpstops
shep wrote:
hay steak_knife the lowrange jobbies are not road legal in aus :wink:

like that would bother you shep :thefinger:
you would use garden hose if it worked :wink:
Author:  shep [ Sun Dec 05, 2010 3:46 am ]
Post subject:  Re: commo/hilux shocks and bumpstops
ajsr wrote:
shep wrote:
hay steak_knife the lowrange jobbies are not road legal in aus :wink:

like that would bother you shep :thefinger:
you would use garden hose if it worked :wink:


it was a seppo braided line that busted, i had the dodgy line while i was
waiting for some adr jobbies to turn up.
brakes and tyres are the two things i don't like to dodgy up.
everything else is fair game but. :lol:
Author:  steak_knife [ Sun Dec 05, 2010 5:06 am ]
Post subject:  Re: commo/hilux shocks and bumpstops
shep wrote:
hay steak_knife the lowrange jobbies are not road legal in aus :wink:


I have em & haven't been pulled over yet, so they can't be to bad.. :lol:

:? & I thought they are :?
Author:  shep [ Sun Dec 05, 2010 5:16 am ]
Post subject:  Re: commo/hilux shocks and bumpstops
steak_knife wrote:
shep wrote:
hay steak_knife the lowrange jobbies are not road legal in aus :wink:


I have em & haven't been pulled over yet, so they can't be to bad.. :lol:

:? & I thought they are :?


narh they have to have a sleeve over the top of the braid to be adr compliant.
my fronts have the sleeve, but my rear flex line is still a seppo jobbie
Author:  steak_knife [ Sun Dec 05, 2010 5:53 am ]
Post subject:  Re: commo/hilux shocks and bumpstops
Heat shrink should do it then?? :wink:
Author:  shep [ Sun Dec 05, 2010 8:42 am ]
Post subject:  Re: commo/hilux shocks and bumpstops
steak_knife wrote:
Heat shrink should do it then?? :wink:


dunno. it is a common reason to defect a motorbike. :wink:
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/