Take back the ones you have and buy a kit off Just Cruisin'. The kit comes with female bolts so there is no cutting or modifying involved. Or you could buy mine off me, only been fitted for about 3 months.
| auszookers.com https://auszookers.com/forum/ |
|
| body lift bolts, what have u done????? https://auszookers.com/forum/viewtopic.php?f=5&t=1734 |
Page 1 of 1 |
| Author: | keechox [ Sun Feb 10, 2008 9:38 pm ] |
| Post subject: | body lift bolts, what have u done????? |
hi guys, just bought some body lift blocks, all seemed fine till i got to the captive bolts (6) mounted to the chassis near the fire wall and behind the seats. do people usually drill out the captive bolts and replace them or is there an easier option?? any advice appreciated cheers |
|
| Author: | Scrawny [ Sun Feb 10, 2008 9:49 pm ] |
| Post subject: | Re: body lift bolts, what have u done????? |
Take back the ones you have and buy a kit off Just Cruisin'. The kit comes with female bolts so there is no cutting or modifying involved. Or you could buy mine off me, only been fitted for about 3 months.
|
|
| Author: | steve [ Sun Feb 10, 2008 9:58 pm ] |
| Post subject: | Re: body lift bolts, what have u done????? |
what's going on scrawn... you getting out of zukes?  ... or going stocker?
|
|
| Author: | Scrawny [ Sun Feb 10, 2008 10:16 pm ] |
| Post subject: | Re: body lift bolts, what have u done????? |
i'll never get out of zooks! i have a limited budget (read- no budget) and i'm just trying to get what i want. i also can't be bothered getting it cert'ed. i want a bar for the front and i don't really need the body lift at the mo as i only run 215 AT's. |
|
| Author: | just_cruizin [ Mon Feb 11, 2008 1:58 am ] |
| Post subject: | Re: body lift bolts, what have u done????? |
Don't worry too much about the cert. I'd say 99% don't have one. It's only approx $58 but when you have no budget that's hard to justify as well for no benifit. |
|
| Author: | Scrawny [ Mon Feb 11, 2008 1:10 pm ] |
| Post subject: | Re: body lift bolts, what have u done????? |
The main reason for not getting it cert'ed was the other bits that need fixing, muffler leaking, small amount of rust, dark tints... and anything they would find. I know with a little bit of time and effort it all can be easily fixed but I just can't find either right now. My two little girls seem to take any spare time I have right now. One day...... Oh, and I need a big arse shed too!!!! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|