| auszookers.com https://auszookers.com/forum/ |
|
| 1996 Baleno motor in pieces https://auszookers.com/forum/viewtopic.php?f=5&t=17492 |
Page 1 of 1 |
| Author: | bigben89 [ Mon Dec 13, 2010 11:18 am ] |
| Post subject: | 1996 Baleno motor in pieces |
Hey folks, have found a nice cheap baleno motor in pieces and wondering if its worth buying,rebuilding and throwing in my 93 sierra. Looking at around $200-$300 for the motor but have been told i can find running ones for that? any help would be appreciated,thanks |
|
| Author: | mighty_vites [ Mon Dec 13, 2010 11:32 am ] |
| Post subject: | Re: 1996 Baleno motor in pieces |
this one is in 1 piece http://auszookers.com/index.php?name=Fo ... ic&t=16645 |
|
| Author: | bigben89 [ Mon Dec 13, 2010 11:40 am ] |
| Post subject: | Re: 1996 Baleno motor in pieces |
that is pretty damn cheap,was going to try just hotting up the 1.3 but after reading over as many forums on the topic it seems that its a lot of effort for not much difference. the baleno 1.6 efi coilpack seems to be the conversion of choice among (most) zookers for a not so horrifically complex conversion. doesnt seem to be many of the good old g16b's around atm though,trying to weigh up my options 
|
|
| Author: | Rhino [ Mon Dec 13, 2010 11:40 am ] |
| Post subject: | Re: 1996 Baleno motor in pieces |
mighty_vites wrote: this one is in 1 piece
http://auszookers.com/index.php?name=Fo ... ic&t=16645 Yes yes it is. But hes looking at a baleno engine which is g16b that one is a g13a..... |
|
| Author: | bigben89 [ Mon Dec 13, 2010 12:23 pm ] |
| Post subject: | Re: 1996 Baleno motor in pieces |
ahhhh damn,just found out its actually the 1.8l j18. think that would be too much effort |
|
| Author: | bigben89 [ Mon Dec 13, 2010 12:30 pm ] |
| Post subject: | Re: 1996 Baleno motor in pieces |
bigben89 wrote: ahhhh damn,just found out its actually the 1.8l j18. think that would be too much effort
though im sure 133hp would be pretty sweet 
|
|
| Author: | MacDaddy [ Mon Dec 13, 2010 2:34 pm ] |
| Post subject: | Re: 1996 Baleno motor in pieces |
bigben89 wrote: bigben89 wrote: ahhhh damn,just found out its actually the 1.8l j18. think that would be too much effort though im sure 133hp would be pretty sweet Hell Yeah ! That 1.8L would make your Zook get up and go, and give it some awesome grunt offroad... and you wouldnt really need to hot it up... 
|
|
| Author: | jonno_racing [ Mon Dec 13, 2010 4:53 pm ] |
| Post subject: | Re: 1996 Baleno motor in pieces |
and break stuff |
|
| Author: | mighty_vites [ Mon Dec 13, 2010 6:42 pm ] |
| Post subject: | Re: 1996 Baleno motor in pieces |
my uncle runs a 1.8 in his zook ute with reduction gears other than that its bog stock. that car made me want to get into zookies, and here i am today. |
|
| Author: | bigben89 [ Tue Dec 14, 2010 11:29 am ] |
| Post subject: | Re: 1996 Baleno motor in pieces |
true? that would be a bit of a more difficult conversion than the 1.6 though i bet so i may leave it and opt for the more common one i think.i think il be getting some reduction gears soon too
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|