auszookers.com
https://auszookers.com/forum/

Vitara front diff shaft spline count
https://auszookers.com/forum/viewtopic.php?f=5&t=17501		 Page 1 of 1
Author:  vegie [ Tue Dec 14, 2010 2:57 am ]
Post subject:  Vitara front diff shaft spline count
So I am looking at lockers for the front of my 1994 LWB Vitara. On the ARB application chart it says in my year range either a 26 or 22 spline count in the front. Is there an easy way to check this?

I rang up a dealer with my VIN but they were unable to tell me.
Author:  Mugwui [ Tue Dec 14, 2010 6:24 am ]
Post subject:  Re: Vitara front diff shaft spline count
Is your car carby or EFI?
If it's carby it is likely to be 22,
EFI, it would be 26.
Author:  christover1 [ Tue Dec 14, 2010 6:59 am ]
Post subject:  Re: Vitara front diff shaft spline count
My LWB is a 93 EFI it has 22 front diff 26 rear
Author:  atari4x4 [ Tue Dec 14, 2010 7:24 am ]
Post subject:  Re: Vitara front diff shaft spline count
what shape dash board is in it? the later round dash was 26 spline.
Author:  vegie [ Tue Dec 14, 2010 8:05 am ]
Post subject:  Re: Vitara front diff shaft spline count
Here's the dash. Does this help? The VIN plate also says built Jul 1993.
Author:  vegie [ Tue Dec 14, 2010 8:06 am ]
Post subject:  Re: Vitara front diff shaft spline count
doublepost :oops:
Author:  joeblow [ Tue Dec 14, 2010 8:06 am ]
Post subject:  Re: Vitara front diff shaft spline count
would be 22 spline then.
Author:  atari4x4 [ Tue Dec 14, 2010 8:20 am ]
Post subject:  Re: Vitara front diff shaft spline count
thanks joe, is that the easiest way to tell?
Author:  joeblow [ Tue Dec 14, 2010 9:10 am ]
Post subject:  Re: Vitara front diff shaft spline count
atari4x4 wrote:
thanks joe, is that the easiest way to tell?


sort of..........that and the change to the hotwire type airflow sensor (type II efi).
Author:  vegie [ Tue Dec 14, 2010 9:46 am ]
Post subject:  Re: Vitara front diff shaft spline count
Cool - thanks heaps.
For the rear diff the App chart has two options for 1993 makes. Suzuki 10 bolt RG and Suzuki 12 bolt RG. What is RG, and what would I have in mine?
Author:  atari4x4 [ Tue Dec 14, 2010 9:52 am ]
Post subject:  Re: Vitara front diff shaft spline count
RG = ring gear, there is both 10 & 12 bolt version. im pretty sure yours will be 12 bolt.
Author:  Joe [ Tue Dec 14, 2010 10:03 am ]
Post subject:  Re: Vitara front diff shaft spline count
joeblow wrote:
carby is 10 bolt......anything efi is 12 bolt.
Author:  vegie [ Tue Dec 14, 2010 10:08 am ]
Post subject:  Re: Vitara front diff shaft spline count
You guys are champs.

Thanks!
Author:  skyman [ Tue Dec 14, 2010 12:55 pm ]
Post subject:  Re: Vitara front diff shaft spline count
For the front of vit's here, 1996 and up are 26 spline. Anything vit before 1996 is 22 spline. Is it possible that it is the same for you guys?

Or did Suzuki have more than one factory for your vit's over there?
Author:  atari4x4 [ Sat Dec 25, 2010 12:28 pm ]
Post subject:  Re: Vitara front diff shaft spline count
skyman, all out vitara's came out of japan.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/