| auszookers.com https://auszookers.com/forum/ |
|
| ARB Old Man Emu Springs Side designation https://auszookers.com/forum/viewtopic.php?f=5&t=17582 |
Page 1 of 1 |
| Author: | S13RR4 [ Fri Dec 17, 2010 11:12 am ] |
| Post subject: | ARB Old Man Emu Springs Side designation |
Does anyone know the markings arb use on old man emu springs for drivers and passenger side? I seem to remember choppy's having a plus and a minus, both mine have a plus... Joe |
|
| Author: | Ben_Sierra [ Fri Dec 17, 2010 12:00 pm ] |
| Post subject: | Re: ARB Old Man Emu Springs Side designation |
The drivers side will be the taller one when you put them side by side... |
|
| Author: | S13RR4 [ Fri Dec 17, 2010 8:27 pm ] |
| Post subject: | Re: ARB Old Man Emu Springs Side designation |
Is there any other way to tell? |
|
| Author: | mrw82 [ Fri Dec 17, 2010 8:52 pm ] |
| Post subject: | Re: ARB Old Man Emu Springs Side designation |
one side will have a plus (+) symbol. the other will have a minus(-). don't ask me which ones which. |
|
| Author: | S13RR4 [ Fri Dec 17, 2010 8:58 pm ] |
| Post subject: | Re: ARB Old Man Emu Springs Side designation |
yeah thats what I thought, The plus (+) is the drivers side and the negative (-) is the passenger |
|
| Author: | zuk_244 [ Fri Dec 17, 2010 9:54 pm ] |
| Post subject: | Re: ARB Old Man Emu Springs Side designation |
S13RR4 wrote: yeah thats what I thought, The plus (+) is the drivers side and the negative (-) is the passenger
Thats it! I was told that....... + Means its above spec (rated load) 0 Means its spot on spec - Means its abit below spec So you put the + on the drivers side to help prevent the "Sierra Lean". Mine still lent abit after a week so I put a extra leaf out of the old pack into the rear drivers side corner. |
|
| Author: | BUZOOKA [ Fri Dec 17, 2010 11:40 pm ] |
| Post subject: | Re: ARB Old Man Emu Springs Side designation |
zuk_244 wrote: S13RR4 wrote: yeah thats what I thought, The plus (+) is the drivers side and the negative (-) is the passenger Thats it! I was told that....... + Means its above spec (rated load) 0 Means its spot on spec - Means its abit below spec So you put the + on the drivers side to help prevent the "Sierra Lean". Mine still lent abit after a week so I put a extra leaf out of the old pack into the rear drivers side corner. mine leant instantly and i have the best springs to the right hand side .. the + and - dont really help just look for the taller spring |
|
| Author: | S13RR4 [ Sat Dec 18, 2010 1:14 am ] |
| Post subject: | Re: ARB Old Man Emu Springs Side designation |
so arb don't cater for the lean? I thought they had a specific left and right spring. I have two plus's. Should I take one back and get a minus or just put the taller one in and hope for the best? |
|
| Author: | ajsr [ Sat Dec 18, 2010 1:22 am ] |
| Post subject: | Re: ARB Old Man Emu Springs Side designation |
S13RR4 wrote: so arb don't cater for the lean? I thought they had a specific left and right spring.
I have two plus's. Should I take one back and get a minus or just put the taller one in and hope for the best? no they dont have left and right |
|
| Author: | S13RR4 [ Sat Dec 18, 2010 2:53 am ] |
| Post subject: | Re: ARB Old Man Emu Springs Side designation |
I see, I'll just have to do it by eye than |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|