Are you fitting 1.3 narrow track diff's???
| auszookers.com https://auszookers.com/forum/ |
|
| 1.3 axle diff swap front and back are they stright swap https://auszookers.com/forum/viewtopic.php?f=5&t=17608 |
Page 1 of 1 |
| Author: | dyllan1 [ Sun Dec 19, 2010 1:30 am ] |
| Post subject: | 1.3 axle diff swap front and back are they stright swap |
hey guys just wondering if the 1.3 litre axles and diff front and back swap with my 1lt ones wana do the swap cause my 1lts getting a 1.3 conversion so my as well swap the axles as well anyone dealt with this before and give me some feed back ? |
|
| Author: | steak_knife [ Sun Dec 19, 2010 1:32 am ] |
| Post subject: | Re: 1.3 axle diff swap front and back are they stright swap |
Are you fitting 1.3 narrow track diff's???
|
|
| Author: | 31zook [ Sun Dec 19, 2010 1:37 am ] |
| Post subject: | Re: 1.3 axle diff swap front and back are they stright swap |
or wt? |
|
| Author: | dyllan1 [ Sun Dec 19, 2010 1:39 am ] |
| Post subject: | Re: 1.3 axle diff swap front and back are they stright swap |
yeah sorry both are narrow track and i know the hand brake is different. |
|
| Author: | steak_knife [ Sun Dec 19, 2010 1:49 am ] |
| Post subject: | Re: 1.3 axle diff swap front and back are they stright swap |
dyllan1 wrote: yeah sorry both are narrow track and i know the hand brake is different.
You will have to bolt the entire housing's in, may as well do it complete, H/brake's are on the transfer so you won't need to touch anything there.. |
|
| Author: | dyllan1 [ Sun Dec 19, 2010 1:53 am ] |
| Post subject: | Re: 1.3 axle diff swap front and back are they stright swap |
yeah i was going to just drop the 1lts complete and bolt the 1.3s complete back up thats why i thought id ask if they would just be a stright swap also are u sure the 1.3 handbrake is on the transfer cause i know my 1lt is but the 1.3 that i have go to direct to the rear drums |
|
| Author: | steak_knife [ Sun Dec 19, 2010 2:21 am ] |
| Post subject: | Re: 1.3 axle diff swap front and back are they stright swap |
Flange's will be diffrent, you will need the n/t shafts, probly would be best to change over the h/bake's as the stud's out of the drum won't fit the n/t shaft's.. All brake line's should bolt up, it's a reasonably easy conversion.. |
|
| Author: | shep [ Sun Dec 19, 2010 2:27 am ] |
| Post subject: | Re: 1.3 axle diff swap front and back are they stright swap |
dyllan1 wrote: yeah i was going to just drop the 1lts complete and bolt the 1.3s complete back up thats why i thought id ask if they would just be a stright swap also are u sure the 1.3 handbrake is on the transfer cause i know my 1lt is but the 1.3 that i have go to direct to the rear drums
are you sure they are nt diffs? i thought it was only WT's that had the handbrake in the rear drums. |
|
| Author: | dyllan1 [ Sun Dec 19, 2010 2:28 am ] |
| Post subject: | Re: 1.3 axle diff swap front and back are they stright swap |
by nt do u mean narrrow track i think there both narrow track ? and yeah i was going to swap the hand brake anyway as mine dosnt seem to work that good |
|
| Author: | dyllan1 [ Sun Dec 19, 2010 2:30 am ] |
| Post subject: | Re: 1.3 axle diff swap front and back are they stright swap |
okay now iam confused how do i check if the 1.3 axles and diff are narrow track or wide track ? |
|
| Author: | shep [ Sun Dec 19, 2010 2:31 am ] |
| Post subject: | Re: 1.3 axle diff swap front and back are they stright swap |
dyllan1 wrote: by nt do u mean narrrow track
i think there both narrow track ? and yeah i was going to swap the hand brake anyway as mine dosnt seem to work that good i still have never heard of a NT with the hand brake in the rear drums. is it a nt that has had wt diffs swapped in? |
|
| Author: | shep [ Sun Dec 19, 2010 2:32 am ] |
| Post subject: | Re: 1.3 axle diff swap front and back are they stright swap |
dyllan1 wrote: okay now iam confused
how do i check if the 1.3 axles and diff are narrow track or wide track ? run a tape measure along the top of the diff and i will measure mine 
back in a tick 
|
|
| Author: | dyllan1 [ Sun Dec 19, 2010 2:37 am ] |
| Post subject: | Re: 1.3 axle diff swap front and back are they stright swap |
okay mines say a 1180mm it was raining and i did it pretty quick haha but its around that and that from say back of drum to back of drum |
|
| Author: | shep [ Sun Dec 19, 2010 2:38 am ] |
| Post subject: | Re: 1.3 axle diff swap front and back are they stright swap |
from the inside of rear diff flange thing that the brakes bolt to, to the opposite one is 1180mm from memory a NT diff is 90mm shorter. |
|
| Author: | shep [ Sun Dec 19, 2010 2:39 am ] |
| Post subject: | Re: 1.3 axle diff swap front and back are they stright swap |
well there ya go you have wt diffs |
|
| Author: | shep [ Sun Dec 19, 2010 2:40 am ] |
| Post subject: | Re: 1.3 axle diff swap front and back are they stright swap |
get a perch kit from fatzook and a wt drag link and it will be a flex machine. |
|
| Author: | steak_knife [ Sun Dec 19, 2010 2:43 am ] |
| Post subject: | Re: 1.3 axle diff swap front and back are they stright swap |
& some flare's...
|
|
| Author: | dyllan1 [ Sun Dec 19, 2010 2:45 am ] |
| Post subject: | Re: 1.3 axle diff swap front and back are they stright swap |
haha okay this is so wierd i swear it is a nt thoe maybe it has been converted i brought this whole sierra cut into a custom ute and got told it was a narrow track and i was like cool so gott the whole thing for 350 with a winch and 1.3 and 5 speed like the car was complete just rusted out and painted with a house roller lol so im scraping it but by the looks on the mounts and iam about to go measure them but i think they are wt diffs but already to go into a nt so i hope i scored on that one haha |
|
| Author: | shep [ Sun Dec 19, 2010 2:50 am ] |
| Post subject: | Re: 1.3 axle diff swap front and back are they stright swap |
dyllan1 wrote: haha okay this is so wierd i swear it is a nt thoe maybe it has been converted
i brought this whole sierra cut into a custom ute and got told it was a narrow track and i was like cool so gott the whole thing for 350 with a winch and 1.3 and 5 speed like the car was complete just rusted out and painted with a house roller lol so im scraping it but by the looks on the mounts and iam about to go measure them but i think they are wt diffs but already to go into a nt so i hope i scored on that one haha go and measure the distance between the rear springs. 
|
|
| Author: | shep [ Sun Dec 19, 2010 2:53 am ] |
| Post subject: | Re: 1.3 axle diff swap front and back are they stright swap |
i have wt diffs with nt spring spacing. approx 910mm between the springs.outside to outside. |
|
| Author: | dyllan1 [ Sun Dec 19, 2010 3:00 am ] |
| Post subject: | Re: 1.3 axle diff swap front and back are they stright swap |
okay went and had another look and i think it is wide track sierra how hard is the conversion and is it that hard |
|
| Author: | shep [ Sun Dec 19, 2010 3:06 am ] |
| Post subject: | Re: 1.3 axle diff swap front and back are they stright swap |
if you can take a photo of the front spring shackle mount we can tell ya for certain what it is. bogfrog did a great write up on the swap. atari is good at searching
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|