7" is a good size for a sierra. Same size as your headlights.
Lightforce 240's look silly.
Thats all I know
| auszookers.com https://auszookers.com/forum/ |
|
| What size spoties for the front bar ?? https://auszookers.com/forum/viewtopic.php?f=5&t=17698 |
Page 1 of 2 |
| Author: | IN2DEP [ Thu Dec 23, 2010 1:02 am ] |
| Post subject: | What size spoties for the front bar ?? |
Hey guys Im getting spotties for chrissy and just wanted to know what size ppl have on the fron bull bars ?? Im thinking of getting IPF 900xs (round) but im not to sure if there going to be to big and look funny any body have used or used any spoties at the same size before ?? |
|
| Author: | Fatzook [ Thu Dec 23, 2010 1:27 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
7" is a good size for a sierra. Same size as your headlights.
Lightforce 240's look silly. Thats all I know
|
|
| Author: | atari4x4 [ Thu Dec 23, 2010 1:30 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
i like the lightforce 170's, but seeing you're doing a spring over just for looks, i suggest you get the biggest baddest spotties you can find.... lightforce 240's might be a tad small for you. |
|
| Author: | IN2DEP [ Thu Dec 23, 2010 3:16 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
atari4x4 wrote: i like the lightforce 170's, but seeing you're doing a spring over just for looks, i suggest you get the biggest baddest spotties you can find.... lightforce 240's might be a tad small for you.
Well anit you funny ey  ,
The SPOA is so i can fit bigger tyres under, who said i cant go and get 32s or 33s, i only said 31s because thats what every one has been saying is the best for sierra, and im getting wider off set on my rims so personaly i cant see the prob with a 4" lift and 32s with a wide off set Yeah its gona look tuff but it ill also preforme better off road as well, and alot of ppl get SPOA set ups, theres nothing wrong with em And if your going to be a smart ass and not give me any useful info on spoties, dont post in this section sorry if im full on but i didnt join this website to be joked about, |
|
| Author: | lump_a_charcoal [ Thu Dec 23, 2010 3:20 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
IN2DEP wrote: i cant see the prob with a 4" lift and 32s with a wide off set
I can. |
|
| Author: | ajsr [ Thu Dec 23, 2010 3:27 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
180mm or under is heaps |
|
| Author: | IN2DEP [ Thu Dec 23, 2010 3:39 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
ajsr wrote: 180mm or under is heaps
So 214mm will be to big you think ??, mind you the IPF 900xs are water proff and i do go through alot water lol http://www.arb.com.au/products/ipf-ligh ... 00-XSS.php do yous think they will stick out of the bar to much ?? |
|
| Author: | atari4x4 [ Thu Dec 23, 2010 3:55 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
atari4x4 wrote: i like the lightforce 170's,[b] but seeing you're doing a spring over just for looks, i suggest you get the biggest baddest spotties you can find.... lightforce 240's might be a tad small for you.
|
|
| Author: | IN2DEP [ Thu Dec 23, 2010 4:00 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
atari4x4 wrote: atari4x4 wrote: i like the lightforce 170's,[b] but seeing you're doing a spring over just for looks, i suggest you get the biggest baddest spotties you can find.... lightforce 240's might be a tad small for you. Cheers mate, that other stuff you said wasnt called for |
|
| Author: | IN2DEP [ Thu Dec 23, 2010 4:07 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
Are these the ones your talking about ?? http://www.lightforce.net.au/products/d ... 170striker and do you know if there water prof ?? it doesnt say, so im taking they aint |
|
| Author: | Ben_Sierra [ Thu Dec 23, 2010 4:08 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
|
|
| Author: | lump_a_charcoal [ Thu Dec 23, 2010 4:11 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
IN2DEP wrote: atari4x4 wrote: i like the lightforce 170's, but seeing you're doing a spring over just for looks, i suggest you get the biggest baddest spotties you can find.... lightforce 240's might be a tad small for you. Well anit you funny ey , The SPOA is so i can fit bigger tyres under, who said i cant go and get 32s or 33s, i only said 31s because thats what every one has been saying is the best for sierra, and im getting wider off set on my rims so personaly i cant see the prob with a 4" lift and 32s with a wide off set Yeah its gona look tuff but it ill also preforme better off road as well, and alot of ppl get SPOA set ups, theres nothing wrong with em And if your going to be a smart ass and not give me any useful info on spoties, dont post in this section sorry if im full on but i didnt join this website to be joked about, Shit dude, if you already know it all, why do you bother asking? I have seen plenty of SPUA setups perform way better than my SPOA setup ever did. Quit calling everyone a smart ass (because next to a dumb ass like you, we are all smart asses), and stop doing shit just 'cos it looks cool. We are not boost cruising, functionality over form everyday. |
|
| Author: | atari4x4 [ Thu Dec 23, 2010 4:13 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
IN2DEP wrote: Are these the ones your talking about ??
http://www.lightforce.net.au/products/d ... 170striker and do you know if there water prof ?? it doesnt say, so im taking they aint they're as water proof as any other spot light.... |
|
| Author: | 89_tintop [ Thu Dec 23, 2010 4:24 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
I had the ipfs you were talking about on my sierra and they looked good. look for my build thread and have a look |
|
| Author: | got_bar_work [ Thu Dec 23, 2010 5:07 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
wat ever light u go for make sure they dont hang over the front of the bar or u will end up smashing them against a rock . |
|
| Author: | christover1 [ Thu Dec 23, 2010 5:52 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
Big lights = less air to radiator, and altered air flow dynamics, so cooling can be affected. Also consider upgrading your low beam, as when you dip your lights, with good spotties, it is like turning the lights off. |
|
| Author: | SHADDY [ Thu Dec 23, 2010 6:11 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
Like Fatzook said...I have a set of 240s on my rodeo and they are overkill but i just put a set of 170s on the wifes zook and they look nice. |
|
| Author: | ajsr [ Thu Dec 23, 2010 6:18 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
those ipf's are a sweet light. Im sure they will be fine. |
|
| Author: | Joe [ Thu Dec 23, 2010 6:18 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
I reckon 240's look alright and still room for airflow 
|
|
| Author: | Moph [ Thu Dec 23, 2010 6:30 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
I like the XGT's on mine. Don't have cooling problems unless I'm sitting idling with the aircon on for a fair while ... and that's no fault of the lights. 
|
|
| Author: | Blueberry [ Thu Dec 23, 2010 8:13 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
christover1 wrote: Big lights = less air to radiator,
and altered air flow dynamics, so cooling can be affected. Also consider upgrading your low beam, as when you dip your lights, with good spotties, it is like turning the lights off. just on the subject, aside from a proper relay switched wiring loom, what other upgrades are available for the low beams? can you buy better rating seald beam units? ive never really looked into it. |
|
| Author: | christover1 [ Thu Dec 23, 2010 8:19 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
I'm told there is a better sealed beam headlight available, straight swap in, from some other car/4wd, forget which, but were/are available from auto shops. Thinking Toyota something. A lot of quartz halogen lights leak water, not good on a 4by |
|
| Author: | Blueberry [ Thu Dec 23, 2010 8:27 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
interesting, i may have to go through the catalouges at work, might be something in the narva book or something. |
|
| Author: | christover1 [ Thu Dec 23, 2010 8:49 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
Blueberry wrote: interesting, i may have to go through the catalouges at work, might be something in the narva book or something.
A mate used them on his sr20 sierra, they had the park light built into them. Will try to find a useful pic |
|
| Author: | christover1 [ Thu Dec 23, 2010 8:55 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
There is also NEOLITES available now, bloody brilliant. Ithink Dank can help with them. DANK |
|
| Author: | Che [ Thu Dec 23, 2010 8:58 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
Get an LED light bar. You'll be the king of awesomeness and it'll shit on everything. |
|
| Author: | Ben_Sierra [ Thu Dec 23, 2010 9:03 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
che_guitarra wrote: Get an LED light bar. You'll be the king of awesomeness and it'll shit on everything.
Don't buy them from snake, buy them from Fatzook! |
|
| Author: | ajsr [ Thu Dec 23, 2010 9:03 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
che_guitarra wrote: Get an LED light bar. You'll be the king of awesomeness and it'll shit on everything.
you will also be the brokest mofo on this site and the range is shit |
|
| Author: | alien [ Thu Dec 23, 2010 9:05 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
theyre landcruiser lights... sealed beam high wattage. im just going to get unsealed again (mine are full of mud) and seal them up myself using a breather hose to allow air to expand/contract still. as for spotties, i love my hella spotties: 
only 150w i think, but they do the job and are a very wide spread beam. |
|
| Author: | christover1 [ Thu Dec 23, 2010 9:05 am ] |
| Post subject: | Re: What size spoties for the front bar ?? |
|
|
| Page 1 of 2 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|