Same. Unless you have a buckled rim like my ute did. Then you need a new rim. So no, you don't need a dampener
| auszookers.com https://auszookers.com/forum/ |
|
| Power Steering/ dampner https://auszookers.com/forum/viewtopic.php?f=5&t=17709 |
Page 1 of 1 |
| Author: | drovin [ Thu Dec 23, 2010 9:42 am ] |
| Post subject: | Power Steering/ dampner |
Hi all. just fitted jimny power seering to the lwb, question is do i need a steeing dampner as well ?? Jimny pitman arm does'nt have whats required, ie a couple of holes. |
|
| Author: | Bruce [ Thu Dec 23, 2010 9:43 am ] |
| Post subject: | Re: Power Steering/ dampner |
I have Jimny power on mine and found you don't need the dampner. JMO |
|
| Author: | BlueSuzy [ Thu Dec 23, 2010 11:13 am ] |
| Post subject: | Re: Power Steering/ dampner |
Same with 33's and vit ps. No dampner. JMO |
|
| Author: | Fatzook [ Thu Dec 23, 2010 11:30 am ] |
| Post subject: | Re: Power Steering/ dampner |
Same. Unless you have a buckled rim like my ute did. Then you need a new rim. So no, you don't need a dampener
|
|
| Author: | steak_knife [ Fri Dec 24, 2010 3:47 am ] |
| Post subject: | Re: Power Steering/ dampner |
I have vit steer & yes I need a dampener.. I can get it to wobble over bump's, just a lil help to stop said wobble & all would be well, but the only one that will help IMO is the calmini one, & haven't been able to find another one like it, & yes have looked.. http://www.lowrangeoffroad.com/suzuki/s ... -kits.html |
|
| Author: | Taylor74 [ Fri Dec 24, 2010 10:33 am ] |
| Post subject: | Re: Power Steering/ dampner |
I have fitted 15 or so power steer to sierras, some do and some dont shimmy. You can drill the arm, modify your bracket to fit or just get a jimney tough dog return to centre dampner, I think alot of sierras shimmy depending to springs and rim ofset. I sugest try it and see. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|