| auszookers.com https://auszookers.com/forum/ |
|
| tail lights https://auszookers.com/forum/viewtopic.php?f=5&t=17782 |
Page 1 of 1 |
| Author: | honks [ Mon Dec 27, 2010 1:46 am ] |
| Post subject: | tail lights |
i just wired up some led tail lights on my zook they are 12v trailer lights but now my indicators flash fast not like they did before how do i fix this? |
|
| Author: | atari4x4 [ Mon Dec 27, 2010 1:47 am ] |
| Post subject: | Re: tail lights |
put a LED flasher can in it, have a search as i think someone talked about putting a resistor in to slow them down. |
|
| Author: | dunnjab [ Mon Dec 27, 2010 1:48 am ] |
| Post subject: | Re: tail lights |
LED draw a lot less current then standered lights. You will have to buy a resistor for it, they sell them at most automative shops like autobarn. I remember want33's posting a really good resistor where its just plug in... |
|
| Author: | benji [ Mon Dec 27, 2010 1:50 am ] |
| Post subject: | Re: tail lights |
you can put a resistor in, you just wire them in accross the pos and neg to load the circuit up they get pretty hot though |
|
| Author: | want33s [ Mon Dec 27, 2010 1:52 am ] |
| Post subject: | Re: tail lights |
dunnjab wrote: LED draw a lot less current then standered lights. You will have to buy a resistor for it, they sell them at most automative shops like autobarn. I remember want33's posting a really good resistor where its just plug in...
No, I just fitted an LED flasher can. Much better than putting resistors in. |
|
| Author: | dunnjab [ Mon Dec 27, 2010 1:53 am ] |
| Post subject: | Re: tail lights |
http://www.auszookers.com/index.php?nam ... +indicator that's the plug in one. |
|
| Author: | pyrohamish [ Mon Dec 27, 2010 6:01 am ] |
| Post subject: | Re: tail lights |
Go an electronic flasher unit that way it wont matter what sort of lights are hooked up anywhere. |
|
| Author: | neofitou [ Tue Dec 28, 2010 9:59 pm ] |
| Post subject: | Re: tail lights |
just a note, the LED flasher cans are illegal to run as it doesnt flash faster or give you other feedback when a light isnt working. the resistors are legal though. I run a LED flasher, Dont buy the cheapest eBay ones, I had one that only worked properly when the engine was not running. |
|
| Author: | royce [ Tue Dec 28, 2010 10:19 pm ] |
| Post subject: | Re: tail lights |
there are ADR compliant LED flashers, jsut not for 20c off ebay |
|
| Author: | neofitou [ Tue Dec 28, 2010 10:35 pm ] |
| Post subject: | Re: tail lights |
yeah probably! |
|
| Author: | cairns27 [ Thu Jan 27, 2011 7:26 am ] |
| Post subject: | Re: tail lights |
I got a electronic flasher ,led tail lightd dtill flash to fast...unit must be led specfic...load bearing.....whilst the guy was trying to find one that would fit ,one auto elect said fit resistors, they don't get hot ,he's fitted hundreds, the next one in the stoe said just let them flash fast like everyone else. bye |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|