| auszookers.com https://auszookers.com/forum/ |
|
| How hard would it be... https://auszookers.com/forum/viewtopic.php?f=5&t=1790 |
Page 1 of 1 |
| Author: | zook89 [ Wed Feb 27, 2008 4:15 pm ] |
| Post subject: | How hard would it be... |
How hard would it be to change a clutch on a 89 sierra 5 speed mated to the virtara engine, the thrust bearing is fyucked i think and the clutch has no adjustment left so time for a new one was thinking something heavy duty maybe excidy? any ideas? |
|
| Author: | royce [ Thu Feb 28, 2008 1:45 am ] |
| Post subject: | Re: How hard would it be... |
not to hard, though the gearbox seems to be jsut the wrong size to get out easy exedy heavy duty would be a good choice for a 1.6, you dont want too heavy a clutch or the cable snaps |
|
| Author: | zook89 [ Thu Feb 28, 2008 3:41 pm ] |
| Post subject: | Re: How hard would it be... |
cheers royce now just to find the right clutch part number to order me clutch and new bearings etc. i think the thrust bearinf is fyucked as under load in gear there is a nasty rattle/loose bolt sound but when clutch is engaged and box is not under load the rattle is gone. Clutch does not slip at all so really not too worryed but just dont want to be stuck in the bush if ya know wat i mean 
|
|
| Author: | royce [ Thu Feb 28, 2008 3:49 pm ] |
| Post subject: | Re: How hard would it be... |
if its noisy with clutch out and quiet with clutch in its probably the input bearing on the box, pretty common |
|
| Author: | zook89 [ Thu Feb 28, 2008 6:05 pm ] |
| Post subject: | Re: How hard would it be... |
input bearing hmmmm not 100% sure what that is i know a little but not much haha i will check the manual i have, is it hard to make the clutch hydrualic ? |
|
| Author: | royce [ Thu Feb 28, 2008 6:13 pm ] |
| Post subject: | Re: How hard would it be... |
the bearing on the input shaft of the gearbox, pull apart the gearbox job I believe I would say it would be hard enough to be not worth it |
|
| Author: | zook89 [ Thu Feb 28, 2008 6:38 pm ] |
| Post subject: | Re: How hard would it be... |
just put up with the rattle then haha. it does need a new clutch the pedal is right out before it engages makes it hard to drive the zook when you 6foot 4 haha but we survive |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|