auszookers.com
https://auszookers.com/forum/

Cup Holders
https://auszookers.com/forum/viewtopic.php?f=5&t=1793		 Page 1 of 2
Author:  yo_stock [ Thu Feb 28, 2008 2:03 pm ]
Post subject:  Cup Holders
Has any one with a Vitara ever put cup holders from a later model (1996 V6 model) into an earlier model (1992)

Does it fit, and on the wide body, where abouts is the window switches located?

Cheers David
Author:  ODA1 [ Thu Feb 28, 2008 5:40 pm ]
Post subject:  Re: Cup Holders
yep i have done this on a freinds vit as we use to raid the wreckers for all the good stuff you dont get here

we just fitted the switches to the top flat part and the rest bolted straight in :D , we also bolted a suzuki tilt metre in too, goes on the dash, you know that big indent on top in the middle, it lit up at night too :lol:
Author:  yo_stock [ Thu Feb 28, 2008 8:01 pm ]
Post subject:  Re: Cup Holders
Where did you get one of them from? I have been looking for ages!!! the incline meter...
Author:  ODA1 [ Thu Feb 28, 2008 9:09 pm ]
Post subject:  Re: Cup Holders
4 years back at capalaba wreckers, i have not been for a while because they dont have GVs. they have lots of import bodies so you have all the extra's that aus misses out on.
Author:  sp1086 [ Thu Feb 28, 2008 9:51 pm ]
Post subject:  Re: Cup Holders
I got the centre console hand break cupholders out of a 98 Estate Wagon... they went stright in.. Just left me a hole where the rear wower window switches were.. As for the Oh S#%t O Meter why bother?

Image
Author:  ODA1 [ Thu Feb 28, 2008 10:17 pm ]
Post subject:  Re: Cup Holders
?? maybe the same thing as fitting BLUE LIGHT COVERS on spotties :roll:
Author:  yo_stock [ Fri Feb 29, 2008 2:24 am ]
Post subject:  Re: Cup Holders
Were abouts do the estate wagons have there rear window switches? Are they on the door normally?
Author:  Scrawny [ Fri Feb 29, 2008 1:29 pm ]
Post subject:  Re: Cup Holders
ODA1 wrote:
?? maybe the same thing as fitting BLUE LIGHT COVERS on spotties :roll:


:lol: Damn, where is that ROFL guy?
Author:  sp1086 [ Fri Feb 29, 2008 9:46 pm ]
Post subject:  Re: Cup Holders
yo_stock wrote:
Were abouts do the estate wagons have there rear window switches? Are they on the door normally?


You see the hole on the top of the centre console where the little flipup lid storage space normally is.. Well thats where the power window switches are I took them out and I now have the two way's speaker there. :wink:
Author:  waxhead [ Sat Mar 01, 2008 12:55 am ]
Post subject:  Re: Cup Holders
Quote:
?? maybe the same thing as fitting BLUE LIGHT COVERS on spotties Rolling Eyes

You do realise those covers serve a purpose?
What good is an incline metre?
Author:  royce [ Sat Mar 01, 2008 12:57 am ]
Post subject:  Re: Cup Holders
waxhead wrote:
Quote:
?? maybe the same thing as fitting BLUE LIGHT COVERS on spotties Rolling Eyes

You do realise those covers serve a purpose?
What good is an incline metre?

owned both, both as useless as each other :cheers:
Author:  steve [ Sat Mar 01, 2008 1:00 am ]
Post subject:  Re: Cup Holders
did someone say twin sticks?
Author:  ODA1 [ Sat Mar 01, 2008 1:49 am ]
Post subject:  Re: Cup Holders
the tilt metre is a factory part that does not come on aussie models and as such its nice to have the extra touches that is different to every other suzuki, i had escudo badges and a factory roof rack on my softtop Vit and this made it a bit different to the rest, i think most poeple do like factory parts that you can not get here...

( over reacted :roll: crap deleted. )
Author:  steve [ Sat Mar 01, 2008 2:00 am ]
Post subject:  Re: Cup Holders
ODA1, i can understand what ya mean about the comment may be percieved to be rude, but i don't think it was intended that way or meant to upset anyone. He is just expressing his opninion, not having a go at anyone.

I usually make comments that seem to upset or provoke people but that's not really my intention, it's always just a bit of a fun joke.
Author:  ODA1 [ Sat Mar 01, 2008 2:09 am ]
Post subject:  Re: Cup Holders
" oh s#%t o metre " ...
Author:  steve [ Sat Mar 01, 2008 2:12 am ]
Post subject:  Re: Cup Holders
i was going to make the comment, of why would you need an incline meter and a cup holder? ... to make sure your coffee is level :lol:
Author:  royce [ Sat Mar 01, 2008 2:13 am ]
Post subject:  Re: Cup Holders
I think sp1086 has a valid point, most meters have a use, fuel gauge gets to empty you stop moving, temp gauge gets too high your engine melts, clock says your late for work your in trouble

what useful info does an angle meter give you? sure it tells you what angle your on but what do you do with the angle? you could say that at xx degrees you may roll over, but cars roll on flat ground, there are soo many variables you cant put a figure on it

SP1086 made a comment on why you would bother fitting something, ODA1 like every post you make that isnt trying to sell your stuff you got upset with somebody not agreeing with you and attacked them on a personal level, thats not acceptable round here.
Author:  Bruce [ Sat Mar 01, 2008 3:15 am ]
Post subject:  Re: Cup Holders
I have one sitting in my shed. Come get it, it's free. Biggest waste of money. :-)
Author:  steve [ Sat Mar 01, 2008 3:17 am ]
Post subject:  Re: Cup Holders
you PAID money for one? :lol:
Author:  Bruce [ Sat Mar 01, 2008 3:21 am ]
Post subject:  Re: Cup Holders
:oops: Yes I did Steve, cause Royce had one in his white Sierra and thought they were cool. Not ROyce being cool but the ooooshi# meters.

Don't start on me Steve. :roll: :wink:
Author:  steve [ Sat Mar 01, 2008 3:24 am ]
Post subject:  Re: Cup Holders
royce's meter would have been seized on about 5%, from parking on gutters :blingbling:
Author:  ODA1 [ Sat Mar 01, 2008 4:12 am ]
Post subject:  Re: Cup Holders
poeple are alowed to a view point and anybody can say somthing is useless or pointless and i did not say his light covers or what he is inerested was shit but i guess that is aceptable

i think the factory tilt metre is cool but the aftermarket ones are a different story but getting back to the subject is that yes you can fit the newer cup holder in with no troubles and this is a good mod.

( exclaimer for every post - no i dont have this product for sale and nor am i pushing you to buy it from me).....
Author:  ODA1 [ Sat Mar 01, 2008 5:50 am ]
Post subject:  Re: Cup Holders
tilt metre to keep coffee level!! :lol: :lol: :lol:
Author:  Bruce [ Sat Mar 01, 2008 11:33 am ]
Post subject:  Re: Cup Holders
ODA1 wrote:
tilt metre to keep coffee level!! :lol: :lol: :lol:


:roll: :wink:
Author:  magnat [ Sat Mar 01, 2008 12:28 pm ]
Post subject:  Re: Cup Holders
I like the tilt metre.. would like to have one....

I made my own cup holder.. gotta stick the Macca's Shake Some where...
Author:  sp1086 [ Sat Mar 01, 2008 9:32 pm ]
Post subject:  Re: Cup Holders
Sorry If I offended you ODA1 it wasn't intended.. I was just saying they are commonly called a Oh s#%t o meter's as when they go past the 30deg mark you useally say "Oh S#%T!"

And Steve.. Do I need to get a magnifying glass to start reading you posts!!! Wheres my Sticker :wink:
Author:  steve [ Sat Mar 01, 2008 11:51 pm ]
Post subject:  Re: Cup Holders
sp1086 wrote:
Wheres my Sticker :wink:


what sticker? did i promise something when i was drunk again? :oops:
Author:  royce [ Sun Mar 02, 2008 12:45 am ]
Post subject:  Re: Cup Holders
ladies and gentlemen I give you the most useful 4x4 accessory to be made in the 21st century

the blue light cover inclonometerererer tm
Author:  steve [ Sun Mar 02, 2008 12:52 am ]
Post subject:  Re: Cup Holders
yeah that's the shit eh 8)
Author:  Bruce [ Sun Mar 02, 2008 1:09 am ]
Post subject:  Re: Cup Holders
Yep when the blue lens hits the steering wheel you go ohhhhhhh sh*****************t
bwhahahahah
Page 1 of 2 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/