inbits wrote:
If it's wide track the spring hangers will be off set not directly under the chassis
2 inch lift should clear 30"s with some hammering and maybe bulletin extensions
Extractors yes but ad a decent exhaust aswell from what I've heard eBay extractors are good
Should this be bump stop extensions?
You would need some bump stop extensions to run 30's. Other option would be to fit a 2 inch body lift, which would probably be cheaper than an Ebay quality lift kit. 2inch BL and a RUF would probably be a nicer option. -17 offset 15x7 rims should give you a nice track width and keep the larger tyres off the springs. If you have NT spring spacing, fitting WT diffs with the spring pads moved to match NT springs will help keep the tyres out off the springs too plus give you a wider track and flex better.
Layto....