| auszookers.com https://auszookers.com/forum/ |
|
| Calmini Vitara SAS https://auszookers.com/forum/viewtopic.php?f=5&t=18030 |
Page 1 of 1 |
| Author: | atari4x4 [ Thu Jan 06, 2011 1:19 am ] |
| Post subject: | Calmini Vitara SAS |
| Author: | Microwire [ Thu Jan 06, 2011 1:28 am ] |
| Post subject: | Re: Calmini Vitara SAS |
Oh |
|
| Author: | atari4x4 [ Thu Jan 06, 2011 1:34 am ] |
| Post subject: | Re: Calmini Vitara SAS |
you'll need to install LHD first... |
|
| Author: | gregdixon [ Thu Jan 06, 2011 2:30 am ] |
| Post subject: | Re: Calmini Vitara SAS |
Won't it just make it a big hairdressing sierra?? |
|
| Author: | IN2DEP [ Thu Jan 06, 2011 3:18 am ] |
| Post subject: | Re: Calmini Vitara SAS |
atari4x4 wrote: you'll need to install LHD first...
Im sure later on down the track they will come out with RHD kits, and if so sweet i can see this selling good Top work |
|
| Author: | stocker [ Thu Jan 06, 2011 3:37 am ] |
| Post subject: | Re: Calmini Vitara SAS |
Surely you'd be able to buy this and just adapt it to a RHD Axle??? |
|
| Author: | royce [ Thu Jan 06, 2011 3:43 am ] |
| Post subject: | Re: Calmini Vitara SAS |
it really only looks like the mounts for the panhard would need reversing to suit, trailing arms and steering would still work Not keen on the sierra diff though, Calmini could easilly adapt what they already have into a wide housing like Joeblow is doing |
|
| Author: | stocker [ Thu Jan 06, 2011 3:55 am ] |
| Post subject: | Re: Calmini Vitara SAS |
Thats One Weapon Front Diff That he fab'd up... would suit the Awesome-ness of this kit |
|
| Author: | Blueberry [ Thu Jan 06, 2011 4:51 am ] |
| Post subject: | Re: Calmini Vitara SAS |
sierra diff would probably be the choice for availability and ease of parts maybe? wonder how it stacks up for track width? sierra compared to a vit? |
|
| Author: | 93zook [ Thu Jan 06, 2011 5:04 am ] |
| Post subject: | Re: Calmini Vitara SAS |
i think the sierra diff would be a bit too flimsy for a sas. i would go with a lux front...or just buy a sierra in the first place |
|
| Author: | inbits [ Thu Jan 06, 2011 7:40 am ] |
| Post subject: | Re: Calmini Vitara SAS |
It says u need wheel spacers so it would be a fair bit different in track width I think it's about 4 inch difference |
|
| Author: | stocker [ Thu Jan 06, 2011 8:21 am ] |
| Post subject: | Re: Calmini Vitara SAS |
so a 25mm Spacer with a 25mm Offset rim should sought it back to stock track width |
|
| Author: | Fatzook [ Thu Jan 06, 2011 8:23 am ] |
| Post subject: | Re: Calmini Vitara SAS |
Is it legal to swap out a diff for another that is ~100mm narrower? I would be surprised if it was. And wheel spacers are illegal in most states. A hilux diff is a much better option IMO, and close enough to the same track width for it not to be a concern. |
|
| Author: | Blueberry [ Thu Jan 06, 2011 9:53 am ] |
| Post subject: | Re: Calmini Vitara SAS |
how would you go about setting up a hilux diff with the same ratio as the rear vit? not being a smartass, just interested how hard it would be to find matching ratios? |
|
| Author: | royce [ Thu Jan 06, 2011 10:03 am ] |
| Post subject: | Re: Calmini Vitara SAS |
you could use 4.8, would be close enough but a bundy front (coil mounts line up!) and hilux rear with 5.29 gears would have to be a better option though Vit is wider than normal hilux |
|
| Author: | BJPK [ Thu Jan 06, 2011 10:07 am ] |
| Post subject: | Re: Calmini Vitara SAS |
regardless of what peoples opinons are on this sas conversion, i think its pretty cool that a major company is still fabbing parts for the old vitaras |
|
| Author: | Fatzook [ Thu Jan 06, 2011 10:25 am ] |
| Post subject: | Re: Calmini Vitara SAS |
Blueberry wrote: how would you go about setting up a hilux diff with the same ratio as the rear vit?
not being a smartass, just interested how hard it would be to find matching ratios? Yeah well that is a sticking point. Still, I'd prefer to do a lux SAS and then have to change the rear diff to lux aswell. Its not that much more work. SAS is a pretty major undertaking. |
|
| Author: | LAY80N [ Thu Jan 06, 2011 10:28 am ] |
| Post subject: | Re: Calmini Vitara SAS |
Quite popular in the states, they are sold as the Suzuki Sidekick, Geo Tracker and a few other names over there. Check on pirate 4x4, some very tough builds. The kit looks good, if you reveresed the panhard rod locations it might work here. Or just go Hydro steering Layto.... |
|
| Author: | Blueberry [ Thu Jan 06, 2011 10:55 am ] |
| Post subject: | Re: Calmini Vitara SAS |
Fatzook wrote: Blueberry wrote: how would you go about setting up a hilux diff with the same ratio as the rear vit? not being a smartass, just interested how hard it would be to find matching ratios? Yeah well that is a sticking point. Still, I'd prefer to do a lux SAS and then have to change the rear diff to lux aswell. Its not that much more work. SAS is a pretty major undertaking. Yea well thats right, if you've got the time and skills to put a lux diff in the front why not just do rear aswell. oh man, ive got all these wild vitara ideas running around in my head!! I think i need to go look in the boobs thread for a while, remind myself its women im into! |
|
| Author: | 31zook [ Thu Jan 06, 2011 11:26 am ] |
| Post subject: | Re: Calmini Vitara SAS |
there is a 4door vit on pirate on 52s |
|
| Author: | Microwire [ Fri Jan 07, 2011 12:30 am ] |
| Post subject: | Re: Calmini Vitara SAS |
I like the idea of this kit but if you want to use the Vit for anything else other than a comp or paddock truck then there's no way an engineer will give you the nod. |
|
| Author: | christover1 [ Fri Jan 07, 2011 12:40 am ] |
| Post subject: | Re: Calmini Vitara SAS |
31zook wrote: there is a 4door vit on pirate on 52s
Probly in the shed getting fixed |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|