hey guys looking to make a new front bar just wanna see some pictures of how u mounted it to ur rig........
i have a sierra but i dont mind looking at jimnys and vits 
| auszookers.com https://auszookers.com/forum/ |
|
| how did u guy mount ur front bar? https://auszookers.com/forum/viewtopic.php?f=5&t=18167 |
Page 1 of 1 |
| Author: | redrocketsj50 [ Tue Jan 11, 2011 6:15 am ] |
| Post subject: | how did u guy mount ur front bar? |
hey guys looking to make a new front bar just wanna see some pictures of how u mounted it to ur rig........ i have a sierra but i dont mind looking at jimnys and vits
|
|
| Author: | hooki [ Tue Jan 11, 2011 6:24 am ] |
| Post subject: | Re: how did u guy mount ur front bar? |
http://www.auszookers.com/index.php?nam ... 30&start=0 |
|
| Author: | DarkHorse [ Tue Jan 11, 2011 1:04 pm ] |
| Post subject: | Re: how did u guy mount ur front bar? |
http://www.auszookers.com/index.php?nam ... &start=240 Happy reading... |
|
| Author: | rick1970 [ Tue Jan 11, 2011 4:49 pm ] |
| Post subject: | Re: how did u guy mount ur front bar? |
I made mine more or less the same as in the link to Sheps posts. I also picked up the 4 x origional bolt holes in the front of the chassis and these attach to the lower bar of the tube bar. Seems pretty strong. |
|
| Author: | PJ.zook [ Tue Jan 11, 2011 6:59 pm ] |
| Post subject: | Re: how did u guy mount ur front bar? |
When I did my RUF conversion I extended the chassis by about 200mm with 50x100 RHS, then reinforced that extension with 5mm plate either side running back into the original chassis, including replacing the original crossmember with more 50x100. Then I just bolted to that, strong as. |
|
| Author: | shakes [ Tue Jan 11, 2011 9:07 pm ] |
| Post subject: | Re: how did u guy mount ur front bar? |
PJ.zook wrote: When I did my RUF conversion I extended the chassis by about 200mm with 50x100 RHS, then reinforced that extension with 5mm plate either side running back into the original chassis, including replacing the original crossmember with more 50x100. Then I just bolted to that, strong as.
before you get rid of your beast I wouldnt mind coming over and having a sticky beak at this man. |
|
| Author: | Built4thrashing [ Wed Jan 12, 2011 4:03 am ] |
| Post subject: | Re: how did u guy mount ur front bar? |
Mine was bolted to the front chasis and i had plates thatwere U bolted to front cross member. Holes are not drilled out in those pics. Was plenty strong enough. |
|
| Author: | redrocketsj50 [ Wed Jan 12, 2011 10:15 am ] |
| Post subject: | Re: how did u guy mount ur front bar? |
Built4thrashing wrote: Mine was bolted to the front chasis and i had plates thatwere U bolted to front cross member. Holes are not drilled out in those pics. Was plenty strong enough. how strong did u find this ?:) keep pics coming guys i like these ideas |
|
| Author: | Built4thrashing [ Thu Jan 13, 2011 4:21 am ] |
| Post subject: | Re: how did u guy mount ur front bar? |
redrocketsj50 wrote: Built4thrashing wrote: Mine was bolted to the front chasis and i had plates thatwere U bolted to front cross member. Holes are not drilled out in those pics. Was plenty strong enough. how strong did u find this ?:) keep pics coming guys i like these ideas I found it this strong. 
But to make the cross member stronger i put some thicker pipe through it |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|