[zooky08]

The other day i started my car up in the morning i warmed it up nd took of up my drive way.
When i was going up the hill nd it suddenly died. Got it on flat level nd tried starting it.
So it started but when i put my foot flat to the floor it only reved to about 2000rpm.
As soon as i take foot of acelerator it dies, so i left it there.
Come back nd found water in my carby from the rain. Got spark plugs out and extractor of nd cranked it over.
All water is out, nd no water in oil.
Now i have fuel coming out of carby.
does any body know why the fuel isn't geting to the piston. It's just shooting all the fuel back out of the top of the carby

It's a g16a engine

[want33s]

Sounds like the cam belt has slipped.

[zooky08]

Just checked timing.
Timing is all good if it has sloped ints only one tooth.
Is one tooth enough to do this
Smithing I forgot to tell you that it doesn't start now

[Ben_Sierra]

zooky08 wrote:

Just checked timing.
Timing is all good if it has sloped ints only one tooth.
Is one tooth enough to do this
Smithing I forgot to tell you that it doesn't start now

How did you check the timing? How do you know its only one tooth?

Yes, one tooth can make a difference...

[zooky08]

Piston one is tdc. Dizzy firing at one and cam is lined up.
One is tdc on 8 degrees