they are a fiderly thing to get in but they do fit without grinding
| auszookers.com https://auszookers.com/forum/ |
|
| sierra chromoly https://auszookers.com/forum/viewtopic.php?f=5&t=18194 |
Page 1 of 1 |
| Author: | smiffkid [ Wed Jan 12, 2011 10:24 am ] |
| Post subject: | sierra chromoly |
where would i find the best deals on chromoly axles and cvs sierra. |
|
| Author: | hooki [ Wed Jan 12, 2011 10:33 am ] |
| Post subject: | Re: sierra chromoly |
lowrange.com in the states |
|
| Author: | smiffkid [ Wed Jan 12, 2011 11:04 am ] |
| Post subject: | Re: sierra chromoly |
cheers lach |
|
| Author: | mat428 [ Thu Jan 13, 2011 11:24 am ] |
| Post subject: | Re: sierra chromoly |
Are they good for price? what bout in Aus? |
|
| Author: | Fatzook [ Thu Jan 13, 2011 11:24 am ] |
| Post subject: | Re: sierra chromoly |
mat428 wrote: Are they good for price? what bout in Aus?
Same product is heaps dearer in OZ. |
|
| Author: | mnemonix [ Thu Jan 13, 2011 11:17 pm ] |
| Post subject: | Re: sierra chromoly |
When installing these, do you need to clearance the inside of the cv cups? I'm whacking a set in my zook today and noticed the outside of the cv/birfield is brone to rubbing on the inside of the cup. |
|
| Author: | Teracis [ Fri Jan 14, 2011 1:07 am ] |
| Post subject: | Re: sierra chromoly |
mnemonix wrote: When installing these, do you need to clearance the inside of the cv cups?
I'm whacking a set in my zook today and noticed the outside of the cv/birfield is brone to rubbing on the inside of the cup. Pretty sure I read somewhere there needs to be some grinding, don't quote me on that until I find it again though. EDIT: Found the info. If this i what you have then I don't think so Chromo's But if you install a set of these, it says you need to get the die grinder out Bifield Rings |
|
| Author: | alex [ Fri Jan 14, 2011 1:13 am ] |
| Post subject: | Re: sierra chromoly |
they are a fiderly thing to get in but they do fit without grinding
|
|
| Author: | mnemonix [ Fri Jan 14, 2011 2:05 am ] |
| Post subject: | Re: sierra chromoly |
Nice nice. I figured the interference was so minimal and only in 1 position it wouldn't be a problem. Whacked it together anyway. Won't be test driving any time soon though. |
|
| Author: | monley [ Thu Feb 03, 2011 11:39 am ] |
| Post subject: | Re: sierra chromoly |
Pretty sure Piranha off road make them for the jimny. |
|
| Author: | Fatzook [ Thu Feb 03, 2011 11:40 am ] |
| Post subject: | Re: sierra chromoly |
monkey wrote: Pretty sure Piranha off road make them for the jimny.
pretty sure you will die of shock when they tell you the price! |
|
| Author: | monley [ Thu Feb 03, 2011 11:45 am ] |
| Post subject: | Re: sierra chromoly |
2k? |
|
| Author: | boostedbrick [ Thu Feb 03, 2011 11:53 am ] |
| Post subject: | Re: sierra chromoly |
alex wrote: they are a fiderly thing to get in but they do fit without grinding
fuken aye there fidley.. I spent a good half hour today sticking it in and out of the hole trying to make it fit.. Got the angle just right and it slipped in. |
|
| Author: | smiffkid [ Thu Feb 03, 2011 11:55 am ] |
| Post subject: | Re: sierra chromoly |
just gotta get the right angle, slips in every time |
|
| Author: | jonno_racing [ Thu Feb 03, 2011 1:12 pm ] |
| Post subject: | Re: sierra chromoly |
i am trying to find out if they will fit in a coily housing before i get new axels made |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|