The Occy Strap has come off
| auszookers.com https://auszookers.com/forum/ |
|
| 4 low popping out of gear. https://auszookers.com/forum/viewtopic.php?f=5&t=18261 |
Page 1 of 1 |
| Author: | matty87 [ Sat Jan 15, 2011 3:18 am ] |
| Post subject: | 4 low popping out of gear. |
Fellas i did a search but i couldnt find the threads i have seen before. basically same old story 4 low is popping out / wont stay in when not under load seams like the gear stick hits the body before it is all the way into 4 low. Iv read bout the problem before but cant remember what the cause is help please. |
|
| Author: | zukmeista [ Sat Jan 15, 2011 3:20 am ] |
| Post subject: | Re: 4 low popping out of gear. |
Body lift? Broken transfer mount? |
|
| Author: | matty87 [ Sat Jan 15, 2011 3:45 am ] |
| Post subject: | Re: 4 low popping out of gear. |
zukmeista wrote: Body lift? Broken transfer mount?
na no bl ill check on the transfer mount when it comes back from wedge but i dont think that any are busted. |
|
| Author: | steak_knife [ Sat Jan 15, 2011 4:08 am ] |
| Post subject: | Re: 4 low popping out of gear. |
G/stick bush...... |
|
| Author: | steve [ Sat Jan 15, 2011 4:14 am ] |
| Post subject: | Re: 4 low popping out of gear. |
The Occy Strap has come off
|
|
| Author: | appsie [ Sat Jan 15, 2011 4:28 am ] |
| Post subject: | Re: 4 low popping out of gear. |
detent? broken mount? bush? hitting floor allthough shoudnt without bl |
|
| Author: | Taylor74 [ Sat Jan 15, 2011 6:16 am ] |
| Post subject: | Re: 4 low popping out of gear. |
grand vitara ? selecta hub if it is between 98 and 2000 modle. common as mud. If sierra id say mount or what seak_knife said |
|
| Author: | jungas [ Sat Jan 15, 2011 7:40 am ] |
| Post subject: | Re: 4 low popping out of gear. |
x2 for gearstick bush...... exactly what happened on mine fine under load then would pop straight out when you hit the clutch. |
|
| Author: | Nagz [ Sat Jan 15, 2011 8:22 am ] |
| Post subject: | Re: 4 low popping out of gear. |
ok so search hasnt given me anything yet either, i have done the 2" body lift and it wont stay in low range, do i just bend the metal out of the way of the gear stick? |
|
| Author: | steak_knife [ Sat Jan 15, 2011 8:24 am ] |
| Post subject: | Re: 4 low popping out of gear. |
Nagz wrote: ok so search hasnt given me anything yet either, i have done the 2" body lift and it wont stay in low range, do i just bend the metal out of the way of the gear stick?
That'll do it.... 
|
|
| Author: | matty87 [ Sat Jan 15, 2011 8:46 am ] |
| Post subject: | Re: 4 low popping out of gear. |
sweet thanks fellas ill check those ideas out. |
|
| Author: | fire60 [ Sun Jan 16, 2011 2:10 am ] |
| Post subject: | Re: 4 low popping out of gear. |
I did a 50mm lift on a 92 vitara and had to bend both levers. Take levers out and heat and bend |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|