| auszookers.com https://auszookers.com/forum/ |
|
| Transfer lever https://auszookers.com/forum/viewtopic.php?f=5&t=18263 |
Page 1 of 1 |
| Author: | turbo_deo [ Sat Jan 15, 2011 5:22 am ] |
| Post subject: | Transfer lever |
So I went to drag my mate out of a bog hole today and when going from low4 to high2 my transfer stick has popped out of the case, it goes back in but I'm just wondering is there a circlip or lock clip that holds it into the case? |
|
| Author: | Taylor74 [ Sat Jan 15, 2011 6:12 am ] |
| Post subject: | Re: Transfer lever |
The stick has a cap with 2 lugs cut into it that locate inside the transfer. It will have a spring under the cap to keep pressure on the stick to hold it into the transfer. Under the stick there should be a bush that the stick sits on. It commonly deteriates and allows the stick to lock in funny places or allows the stick to dislodge from the transfer. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|