i just lifted my tcase with 3 bits of box section and high tensile bolts once i did my BL, worked a treat and now the tcase is high and dry so i dont hit it the same
| auszookers.com https://auszookers.com/forum/ |
|
| helppp with low range https://auszookers.com/forum/viewtopic.php?f=5&t=18270 |
Page 1 of 1 |
| Author: | zook95 [ Sat Jan 15, 2011 9:00 am ] |
| Post subject: | helppp with low range |
hey guys i went out bago nsw today and my low range jumps out of its gear every time i hit a bump is this normal with a cab lift???????? and how can i fix it |
|
| Author: | Microwire [ Sat Jan 15, 2011 9:01 am ] |
| Post subject: | Re: helppp with low range |
Did you cut some room when you lifted? It's probably hitting on something when the transmision moves. |
|
| Author: | atari4x4 [ Sat Jan 15, 2011 9:02 am ] |
| Post subject: | Re: helppp with low range |
there are a couple of active threads on this subject. stick is probably hitting the floorplan |
|
| Author: | ellis [ Sat Jan 15, 2011 9:06 am ] |
| Post subject: | Re: helppp with low range |
yes it would be cut out where it is hitting and you may need 2 remove a bit off rubber |
|
| Author: | zook95 [ Sat Jan 15, 2011 9:10 am ] |
| Post subject: | Re: helppp with low range |
i got under there and it is hitting the tunnel |
|
| Author: | Microwire [ Sat Jan 15, 2011 9:12 am ] |
| Post subject: | Re: helppp with low range |
Nibler to the rescue!! |
|
| Author: | zook95 [ Sat Jan 15, 2011 9:17 am ] |
| Post subject: | Re: helppp with low range |
haha yer it gets anoyying after a while trying to hold it in whil 4x4ing lol |
|
| Author: | MART [ Sat Jan 15, 2011 9:30 am ] |
| Post subject: | Re: helppp with low range |
You can always re-bend the shifter lever to suit , but making the hole a little larger usually fixes the problem , Cheers Paul. |
|
| Author: | 5ierra [ Sat Jan 15, 2011 10:30 am ] |
| Post subject: | Re: helppp with low range |
You can also install a tcase lift if you have a body lift already, could be worthwhile. |
|
| Author: | Llewellyn92 [ Sun Jan 16, 2011 12:24 pm ] |
| Post subject: | Re: helppp with low range |
i just lifted my tcase with 3 bits of box section and high tensile bolts once i did my BL, worked a treat and now the tcase is high and dry so i dont hit it the same
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|