For sure - after my bonnet flinging up at 100k's I won't skimp on quality
I'll see what grades they got available, hopefully something that can also handle the heat of the radiator.
| auszookers.com https://auszookers.com/forum/ |
|
| Bonnet opener/accelerator type cable https://auszookers.com/forum/viewtopic.php?f=5&t=18290 |
Page 1 of 1 |
| Author: | Che [ Sun Jan 16, 2011 4:47 am ] |
| Post subject: | Bonnet opener/accelerator type cable |
I want to move the bonnet opener out of the glovebox and to a bracket accessible from the front underside. It'd be better if the cable was 2ft shorter so just wondering where I can get custom lengths of this stuff from? What is the proper name for this type of cable too? |
|
| Author: | ajsr [ Sun Jan 16, 2011 4:51 am ] |
| Post subject: | Re: Bonnet opener/accelerator type cable |
ebay etc look for hq - wb or similar year falcon shit they are cheap |
|
| Author: | OMalley [ Sun Jan 16, 2011 4:58 am ] |
| Post subject: | Re: Bonnet opener/accelerator type cable |
You could chop up an old mechanical brake cable off a bike, no? |
|
| Author: | Che [ Sun Jan 16, 2011 5:11 am ] |
| Post subject: | Re: Bonnet opener/accelerator type cable |
^^^ Ahh, true. I'll hit up a bike shop through the week |
|
| Author: | alien [ Sun Jan 16, 2011 5:27 am ] |
| Post subject: | Re: Bonnet opener/accelerator type cable |
theres different grades of bike cable too - with different coatings inside the plastic housing - its well worth investing in good quality as they never jam up. |
|
| Author: | Che [ Sun Jan 16, 2011 5:59 am ] |
| Post subject: | Re: Bonnet opener/accelerator type cable |
For sure - after my bonnet flinging up at 100k's I won't skimp on quality
I'll see what grades they got available, hopefully something that can also handle the heat of the radiator. |
|
| Author: | ajsr [ Sun Jan 16, 2011 6:03 am ] |
| Post subject: | Re: Bonnet opener/accelerator type cable |
here you are http://cgi.ebay.com.au/Bonnet-Release-C ... 3f03422418 http://cgi.ebay.com.au/FALCON-XR-XY-XA- ... 3a623a43b3 |
|
| Author: | Che [ Sun Jan 16, 2011 6:15 am ] |
| Post subject: | Re: Bonnet opener/accelerator type cable |
I need one with an outer section ~70cm long, give or take a centimetre or two. |
|
| Author: | alien [ Sun Jan 16, 2011 6:20 am ] |
| Post subject: | Re: Bonnet opener/accelerator type cable |
http://www.odysseybmx.com/catalog/braking/slic-kable/ thats what im running on my bike - because theyre pre-stretched and have the teflon in the housing, theyre super smooth and once adjusted the first time don't need to be touched again. |
|
| Author: | ajsr [ Sun Jan 16, 2011 7:06 am ] |
| Post subject: | Re: Bonnet opener/accelerator type cable |
che_guitarra wrote: I need one with an outer section ~70cm long, give or take a centimetre or two.
thats why I said HQ type, you can cut them down fairly easily |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|