Nothing fits a coily
Why bother putting in another weaker unit that has little to no aftermarket quality performance parts?? W/T diff all the way buddy 
JMO though
What is your reasoning??
| auszookers.com https://auszookers.com/forum/ |
|
| jimny diff sj80 https://auszookers.com/forum/viewtopic.php?f=5&t=18298 |
Page 1 of 1 |
| Author: | ellis [ Sun Jan 16, 2011 8:15 am ] |
| Post subject: | jimny diff sj80 |
will a jimny rear diff bolt straight in to my coily sierra |
|
| Author: | Rusho [ Sun Jan 16, 2011 8:22 am ] |
| Post subject: | Re: jimny diff sj80 |
Nothing fits a coily Why bother putting in another weaker unit that has little to no aftermarket quality performance parts?? W/T diff all the way buddy JMO though
What is your reasoning?? |
|
| Author: | ellis [ Sun Jan 16, 2011 8:29 am ] |
| Post subject: | Re: jimny diff sj80 |
i got a auto locker in the rear atm and i want to put in a air locker there is a jimny at the wreaker so i thort i would just grab the diff from that put the air locker in that and just sell my diff with the auto locker in it and btw do the wt diffs bolt in??? |
|
| Author: | Rusho [ Sun Jan 16, 2011 8:33 am ] |
| Post subject: | Re: jimny diff sj80 |
ellis wrote: btw do the wt diffs bolt in???
Definately not...cut existing mounts off, glue on new coil/control arm mounts and have it all in the correct geometrical position. Send Tuffsuzi a PM...pretty sure he has a jimny diff in the front of his coily |
|
| Author: | ellis [ Sun Jan 16, 2011 8:36 am ] |
| Post subject: | Re: jimny diff sj80 |
when i mean diff i mean just the diff housing |
|
| Author: | Rhino [ Sun Jan 16, 2011 10:46 am ] |
| Post subject: | Re: jimny diff sj80 |
ellis wrote: when i mean diff i mean just the diff housing
 You've lost me
I was going to suggest just buying a NT diff center, but im not realy sure if thats what you were asking........... |
|
| Author: | Benz [ Sun Jan 16, 2011 1:17 pm ] |
| Post subject: | Re: jimny diff sj80 |
yeah you should to be able to get another diff coily centre put the locker in that and swap them over???? then sell the other centre? jimny centre might have different ratios? |
|
| Author: | cbzook [ Sun Jan 16, 2011 9:05 pm ] |
| Post subject: | Re: jimny diff sj80 |
They don't make lockers for front diffs in coilys because there shit house diffs |
|
| Author: | Benz [ Sun Jan 16, 2011 11:31 pm ] |
| Post subject: | Re: jimny diff sj80 |
did he not say rear diff? unless you cant get a airlocker for that? swapping a whole diff seems like alot of work for a locker |
|
| Author: | Rusho [ Mon Jan 17, 2011 12:27 am ] |
| Post subject: | Re: jimny diff sj80 |
Benz2369 wrote: swapping a whole diff seems like alot of work for a locker
It's the only option for us coily owners 
|
|
| Author: | BlueSuzy [ Mon Jan 17, 2011 12:57 am ] |
| Post subject: | Re: jimny diff sj80 |
The coily rear diff "centre" should be the exact same as a 1.3 sierra/rear jimny centre/or front vit. Low Pinions The fronts are HP. The "Whole" Jimny rear diff will be wider. And i doubt the brackets/mounts will be in the same exact position. 4.09 ratio. Coilys are different ratio. 3.9? |
|
| Author: | ellis [ Tue Jan 18, 2011 12:00 pm ] |
| Post subject: | Re: jimny diff sj80 |
ok thanks i did not think about the different ratio's |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|