Will look good with a front bar on
| auszookers.com https://auszookers.com/forum/ |
|
| vitara on 31's https://auszookers.com/forum/viewtopic.php?f=5&t=18301 |
Page 1 of 1 |
| Author: | Brett [ Sun Jan 16, 2011 10:14 am ] |
| Post subject: | vitara on 31's |
well i got bored and thought i'd get ready one of the vitaras at work for the 31's. here is how i went. started but cutting the rear guards and folding them up, pulled the front bumper of because it had no chance of turning with it on. |
|
| Author: | Brett [ Sun Jan 16, 2011 10:20 am ] |
| Post subject: | Re: vitara on 31's |
how it sits on the 31's with no lift, no front bar. i'll putting a extended bump stop in the rear that will about 25- 30 mm as its just staring to rub and has about 10 mm till the bump stops touches. the front clears the outside guard but just touches the fire wall and inside where the plastic guard liner was bolted to. this is lock to lock and i was quite surprised that it does not need grinding. front is on the bump stops so a hammer will fix the inner and wall. |
|
| Author: | 95sierra [ Sun Jan 16, 2011 10:23 am ] |
| Post subject: | Re: vitara on 31's |
Nice mate. Looks the goods! Zach |
|
| Author: | Joe [ Sun Jan 16, 2011 11:34 am ] |
| Post subject: | Re: vitara on 31's |
Will look good with a front bar on
|
|
| Author: | 31zook [ Sun Jan 16, 2011 7:14 pm ] |
| Post subject: | Re: vitara on 31's |
X2 joe, looks low and fat 
|
|
| Author: | jesse_vit [ Mon Jan 17, 2011 7:13 am ] |
| Post subject: | Re: vitara on 31's |
how do they go with the gearing? or have you changed the gearing drom stock? |
|
| Author: | Brett [ Mon Jan 17, 2011 9:14 am ] |
| Post subject: | Re: vitara on 31's |
the car is a auto, but to tell you the truth it drives better( gearing) than the other one i have on 235 that is a manual |
|
| Author: | stocker [ Mon Jan 17, 2011 9:23 am ] |
| Post subject: | Re: vitara on 31's |
:S whats the difference in gearing ratio's between Auto and manual??? |
|
| Author: | shandy92 [ Mon Jan 17, 2011 12:29 pm ] |
| Post subject: | Re: vitara on 31's |
awesome job, wouldnt mind doing this to mine one day...one day. what did u do with the inner guards? any photos of the inners would be great cheers Mitch |
|
| Author: | Brett [ Mon Jan 17, 2011 4:59 pm ] |
| Post subject: | Re: vitara on 31's |
i'll grab some this arvo but all i did was get a 2 pound hammer and asked it nicely to move out of the way |
|
| Author: | shandy92 [ Tue Jan 18, 2011 6:48 am ] |
| Post subject: | Re: vitara on 31's |
Brett wrote: i'll grab some this arvo but all i did was get a 2 pound hammer and asked it nicely to move out of the way
ahaha is that a nice way of saying that you abused the crap out of it? doesnt the inner guard clip in? i thought it did, just wondering where its clipped to now? or have i got it completely wrong? Mitch |
|
| Author: | Brett [ Tue Jan 18, 2011 7:26 am ] |
| Post subject: | Re: vitara on 31's |
the inner plastic bit is in the bin. the inner guard that the plastic clips on to is what i took the hammer to |
|
| Author: | shandy92 [ Tue Jan 18, 2011 7:42 am ] |
| Post subject: | Re: vitara on 31's |
Brett wrote: the inner plastic bit is in the bin. the inner guard that the plastic clips on to is what i took the hammer to
ahaha ok makes more sense. pics please |
|
| Author: | shandy92 [ Mon Jan 24, 2011 10:15 am ] |
| Post subject: | Re: vitara on 31's |
any chance of those pics?? |
|
| Author: | got_bar_work [ Mon Jan 24, 2011 9:52 pm ] |
| Post subject: | Re: vitara on 31's |
When I did my front i folded the inner lip flat out in to the void then folded the outer skin in to the void then just screwed the plastic bit back on Can't even tell it's been done |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|