auszookers.com
https://auszookers.com/forum/

Wider Power Steering Pulley
https://auszookers.com/forum/viewtopic.php?f=5&t=18317
Page 1 of 1

Author:  truongski [ Mon Jan 17, 2011 3:45 am ]
Post subject:  Wider Power Steering Pulley

Over the weekend when I was changing the oil, I noticed the belt overhangs the P/S pulley by about 2-4mm (approx 2 or 3 ribs), however sits nicely on the A/C pulley.

As my A/C is aftermarket and I can't move it back because it will hit the exhaust manifold, is there a way I can get a wider pulley for the P/S?

Cheers.

Author:  mrw82 [ Mon Jan 17, 2011 4:25 am ]
Post subject:  Re: Wider Power Steering Pulley

why don't you just get a belt with less ribs on it to suit your PS pulley? it shouldn't affect it if theres 2 ribs on the aircon pulley not being used. try it and if the belt slips then go to the effort of changing pulleys.

Author:  truongski [ Mon Jan 17, 2011 8:21 am ]
Post subject:  Re: Wider Power Steering Pulley

mrw82 wrote:
why don't you just get a belt with less ribs on it to suit your PS pulley? it shouldn't affect it if theres 2 ribs on the aircon pulley not being used. try it and if the belt slips then go to the effort of changing pulleys.


Cheers mate. I'll give that a go.

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/