| auszookers.com https://auszookers.com/forum/ |
|
| Relocate fuel filler https://auszookers.com/forum/viewtopic.php?f=5&t=18323 |
Page 1 of 1 |
| Author: | Red_October [ Mon Jan 17, 2011 5:12 am ] |
| Post subject: | Relocate fuel filler |
I managed to get water up to the fuel cap on the weekend. This wasn't the first time either. I've tried various fuel caps etc but none seem to seal properly - presumably to vent gases etc. In the interest of keeping water out of the tank, has anyone relocated the fuel filler to the inside of the car? I imagine this would be fairly easy to do by simply disconnecting the hose from the filler pipe, rotate it towards the inside of the car, and connecting it to a new filler pipe with cap (from wreckers). Thoughts? Cheers, Jimmy. |
|
| Author: | Damo [ Mon Jan 17, 2011 5:15 am ] |
| Post subject: | Re: Relocate fuel filler |
Red_October wrote: I managed to get water up to the fuel cap on the weekend. This wasn't the first time either. I've tried various fuel caps etc but none seem to seal properly - presumably to vent gases etc. In the interest of keeping water out of the tank, has anyone relocated the fuel filler to the inside of the car? I imagine this would be fairly easy to do by simply disconnecting the hose from the filler pipe, rotate it towards the inside of the car, and connecting it to a new filler pipe with cap (from wreckers). Thoughts?
Cheers, Jimmy. If it doesn't seal properly and you put it inside the vehicle I can only guess you're gonna get fumes in there. That would suck. Don't light a ciggie. |
|
| Author: | 31zook [ Mon Jan 17, 2011 6:53 am ] |
| Post subject: | Re: Relocate fuel filler |
just don't worry about it, maybe if it's a current and it's pushing against the fuel side, just drive backwards through the river |
|
| Author: | OMalley [ Tue Jan 18, 2011 9:22 am ] |
| Post subject: | Re: Relocate fuel filler |
I've got a fuel cap that I purchased from repco that seals extremely well. Had to almost force it on. Cept I don't think it vents the pressure.. at all. |
|
| Author: | jdk81 [ Tue Jan 18, 2011 9:52 am ] |
| Post subject: | Re: Relocate fuel filler |
i put a ryco marine fuel filter with water seperator and mounted where the carbon canister normally sits. I placed a heat sheild to protect it from the headers. I bypassed the original fuel filter, and plumbed the marine filter before the fuel pump. I also installed a motorbike filter between pump and carby, to reduce the chance of gunk coming from the pump. |
|
| Author: | Fatzook [ Tue Jan 18, 2011 9:59 am ] |
| Post subject: | Re: Relocate fuel filler |
jdk81 wrote: i put a ryco marine fuel filter with water seperator and mounted where the carbon canister normally sits. I placed a heat sheild to protect it from the headers.
I bypassed the original fuel filter, and plumbed the marine filter before the fuel pump. I also installed a motorbike filter between pump and carby, to reduce the chance of gunk coming from the pump. Who's talking about filters???? This thread is about the merits relocating the fuel FILLER |
|
| Author: | jdk81 [ Tue Jan 18, 2011 10:05 am ] |
| Post subject: | Re: Relocate fuel filler |
Fatzook wrote: Who's talking about filters???? This thread is about the merits relocating the fuel FILLER Ill blame my phone for me being a retard. But it does solve the water in fuel issue |
|
| Author: | royce [ Tue Jan 18, 2011 10:05 am ] |
| Post subject: | Re: Relocate fuel filler |
relocation is due to water ingress, filter mentioned stops said ingressed water getting out of the filter, hence relevant |
|
| Author: | Fatzook [ Tue Jan 18, 2011 10:09 am ] |
| Post subject: | Re: Relocate fuel filler |
royce wrote: relocation is due to water ingress, filter mentioned stops said ingressed water getting out of the filter, hence relevant
Ok. How much water can the seperator hold? |
|
| Author: | boostedbrick [ Tue Jan 18, 2011 10:13 am ] |
| Post subject: | Re: Relocate fuel filler |
Fatzook wrote: royce wrote: relocation is due to water ingress, filter mentioned stops said ingressed water getting out of the filter, hence relevant Ok. How much water can the seperator hold? Then you would get one that stops flowing if there is too much water.. |
|
| Author: | Fatzook [ Tue Jan 18, 2011 10:16 am ] |
| Post subject: | Re: Relocate fuel filler |
boostedbrick wrote: Fatzook wrote: royce wrote: relocation is due to water ingress, filter mentioned stops said ingressed water getting out of the filter, hence relevant Ok. How much water can the seperator hold? Then you would get one that stops flowing if there is too much water.. Yeeeeeeeaaaaaah Can you bolt on an auxilary tank to the seperator? |
|
| Author: | Red89 [ Tue Jan 18, 2011 11:02 am ] |
| Post subject: | Re: Relocate fuel filler |
If you can work out somewhere to fit this where it wont get damaged from rocks and stuff they seal extremely well and dont have a breather. Its a flush mount marine fuel filler, that they use for there onboard fuel tanks.
|
|
| Author: | jdk81 [ Wed Jan 19, 2011 10:09 pm ] |
| Post subject: | Re: Relocate fuel filler |
The sping loaded flap in the fuel filler prevents heaps of water pouring into your tank anyway. Try filling up using a jerry can, and a short funnel which doesnt open this flap. See how long it takes. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|