Benz2369 wrote:
monkey wrote:
I have just done my zorst.
hmm... could just change the end a little? wouldn't be hard....
That would mean changing the tail pipe for a 2nd time.
I'm going to go for a custom bar anyway.
| auszookers.com https://auszookers.com/forum/ |
|
| Jimny steel rear bars and sliders https://auszookers.com/forum/viewtopic.php?f=5&t=18358 |
Page 1 of 2 |
| Author: | hermsie62 [ Tue Jan 18, 2011 10:13 pm ] |
| Post subject: | Jimny steel rear bars and sliders |
Saw these on ebay from the same guys who have just bought out the new bars. http://cgi.ebay.com.au/Steel-rear-bumpe ... 3a6270db42 http://cgi.ebay.com.au/Rock-slider-SUZU ... m3a6270f86 |
|
| Author: | Benz [ Tue Jan 18, 2011 10:46 pm ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
that rear bar looks nice =] would have to sort out mud flaps... and also how does the wheel stay up against the car? would have to see the sliders on the jimny first |
|
| Author: | vermin [ Tue Jan 18, 2011 11:02 pm ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
I think I might buy one. They look pretty good and will help with departure angles more than the plastic stock one. The only thing that confuses me is the swing away tyre holder? Why bother with that given it's only a single door? "We are an overseas OEM factory. We manufacture 4x4 accessories for the American market and EU market for 10+ years. We would like to supply our products with reasonable prices to OZ customers. At the moment, due to the low volume of some vehicle models in OZ, we only offer make to order (MTO) to the Australian market. Therefore, our delivery time will be variable between 2 days to 2 months. Thanks for your consideration." ALSO...2 days to 2 months...not sure if I like the idea of this made to order stuff. I thought ebay was only allowed to sell products immediately available??? |
|
| Author: | brindog [ Tue Jan 18, 2011 11:14 pm ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
Yeah they look pretty nice, would be good if they had a jerry can holder as well, then I would defiantly get one. |
|
| Author: | monley [ Tue Jan 18, 2011 11:21 pm ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
Yeh the rear bar looks good! But what would you do about the tail pipe and muffler because they are hidden by the factory bumber and that bar is a bit higher, might look a bit odd. |
|
| Author: | Benz [ Tue Jan 18, 2011 11:26 pm ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
would have to do the zorst at the same time. and I guess it take the weight off the door. not an issue for someone running little rubber like me. i guess people running bigger stuff would like it more |
|
| Author: | monley [ Tue Jan 18, 2011 11:27 pm ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
I have just done my zorst. |
|
| Author: | Benz [ Tue Jan 18, 2011 11:33 pm ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
monkey wrote: I have just done my zorst.
hmm... could just change the end a little? wouldn't be hard.... |
|
| Author: | monley [ Tue Jan 18, 2011 11:35 pm ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
Benz2369 wrote: monkey wrote: I have just done my zorst. hmm... could just change the end a little? wouldn't be hard.... That would mean changing the tail pipe for a 2nd time.
I'm going to go for a custom bar anyway. |
|
| Author: | BertZook [ Wed Jan 19, 2011 12:27 am ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
woooow that rear bar it looks awesome just perfect!!.... recovery points, tow point, rear wheel carrier, back mount for spotie, and still keep the rear step the only thing I would like to know is how the rear wheel carrier locks into the bar?? it doesnt show and a really good price for a rear bar eh? |
|
| Author: | BertZook [ Wed Jan 19, 2011 12:37 am ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
monkey wrote: Yeh the rear bar looks good!
But what would you do about the tail pipe and muffler because they are hidden by the factory bumber and that bar is a bit higher, might look a bit odd. Jap jimnys have the same issue, and it doesnt look bad it wont affect your performance so pffff... and other bars youll have same problem.... and your departure angle is waaay big enough s you wont hit it....think youll hit something first before that.... and if u do youll have the excuse to change it then 
we just wait till mr fatzook have his bar ready 
|
|
| Author: | monley [ Wed Jan 19, 2011 12:42 am ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
BertZook wrote: monkey wrote: Yeh the rear bar looks good! But what would you do about the tail pipe and muffler because they are hidden by the factory bumber and that bar is a bit higher, might look a bit odd. Jap jimnys have the same issue, and it doesnt look bad it wont affect your performance so pffff... and other bars youll have same problem.... and your departure angle is waaay big enough s you wont hit it....think youll hit something first before that.... and if u do youll have the excuse to change it then we just wait till mr fatzook have his bar ready Is Mr Fatzook making a rear bar? |
|
| Author: | Fatzook [ Wed Jan 19, 2011 12:57 am ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
monkey wrote: BertZook wrote: we just wait till mr fatzook have his bar ready Is Mr Fatzook making a rear bar? Yeah I have some chicken scratchings here of a design thats actually not too different to the above mentioned bar. Infact I reckon if you beefed up the bar mounts on this bar ( way too light duty to use for recovery and towing!!!) this bar would be perfect. I'd probably make a few small changes to the swingaway design too. 
|
|
| Author: | brindog [ Wed Jan 19, 2011 4:21 am ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
Would love a rear bar something like the ARB one for Landcrusiers, just with some recovery points. 
Jerry can holder would be ace !! 
Quick photoshop.
I would buy it in a heart beat. |
|
| Author: | Fatzook [ Wed Jan 19, 2011 4:22 am ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
So you have $2500-3000 for a rear bar? 
|
|
| Author: | BertZook [ Wed Jan 19, 2011 4:29 am ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
I recognize the guy in that pic
|
|
| Author: | brindog [ Wed Jan 19, 2011 4:55 am ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
Fatzook wrote: So you have $2500-3000 for a rear bar? Is that how much they are ??  Surely it wouldn't cost that much for one similar to the MIC one with a Jerry holder ? BertZook wrote: I recognize the guy in that pic
Same, he's a bit of an odd fella though
|
|
| Author: | Fatzook [ Wed Jan 19, 2011 5:03 am ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
brindog wrote: Fatzook wrote: So you have $2500-3000 for a rear bar? Is that how much they are ?? Surely it wouldn't cost that much for one similar to the MIC one with a Jerry holder ? Worse. WAY worse!!
I just rang ARB. A rear bar the same as in your pic for a 100 series live axle, inc colour coding is $3949.00 
|
|
| Author: | Benz [ Wed Jan 19, 2011 5:31 am ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
Fatzook wrote: brindog wrote: Fatzook wrote: So you have $2500-3000 for a rear bar? Is that how much they are ?? Surely it wouldn't cost that much for one similar to the MIC one with a Jerry holder ? Worse. WAY worse!! I just rang ARB. A rear bar the same as in your pic for a 100 series live axle, inc colour coding is $3949.00 wow.... sure it looks nice... but not that nice! who would even buy one for that price? no suzuki owner i know
i guess a toyota owner might though |
|
| Author: | Fatzook [ Wed Jan 19, 2011 5:37 am ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
Benz2369 wrote: Fatzook wrote: brindog wrote: Fatzook wrote: So you have $2500-3000 for a rear bar? Is that how much they are ?? Surely it wouldn't cost that much for one similar to the MIC one with a Jerry holder ? Worse. WAY worse!! I just rang ARB. A rear bar the same as in your pic for a 100 series live axle, inc colour coding is $3949.00 wow.... sure it looks nice... but not that nice! who would even buy one for that price? no suzuki owner i know i guess a toyota owner might though For a suzuki? Maybe some loaded GV drivers, But I can't see too many Jimny owners spending 20% of what they paid for their entire car on a new rear bar!! Shit, If I couldn't have that on the shelf for under $2K I wouldn't bother. 
|
|
| Author: | monley [ Wed Jan 19, 2011 6:10 am ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
Fuck paying $4000 for a rear bar. The most i would pay for a rear bar would be no more than $500. I like the offroad-armoury rear bar. |
|
| Author: | Fatzook [ Wed Jan 19, 2011 6:14 am ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
monkey wrote: Fuck paying $4000 for a rear bar.
The most i would pay for a rear bar would be no more than $500. I like the offroad-armoury rear bar. Well you won't get much for $500
|
|
| Author: | monley [ Wed Jan 19, 2011 6:16 am ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
Fatzook wrote: monkey wrote: Fuck paying $4000 for a rear bar. The most i would pay for a rear bar would be no more than $500. I like the offroad-armoury rear bar. Well you won't get much for $500 I was waiting for someone to tell me $500 won't go far, but hey why pay when i could make it for fuck all.HAHA |
|
| Author: | Fatzook [ Wed Jan 19, 2011 6:19 am ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
monkey wrote: Fatzook wrote: monkey wrote: Fuck paying $4000 for a rear bar. The most i would pay for a rear bar would be no more than $500. I like the offroad-armoury rear bar. Well you won't get much for $500 I was waiting for someone to tell me $500 won't go far, but hey why pay when i could make it for fuck all.HAHA By all means make your own. 
But you aren't comparing apple with apples now are you. ARB's bar is a very complicated design. There would be dozens of components, and a labour intensive build process. ( probably use robots for most of it.... )
I still don't think that $4K is any where near justifiable, but I am confident that even if YOU had the skill to make a similar bar, it would cost you considerably more than $500 to do so
|
|
| Author: | monley [ Wed Jan 19, 2011 6:24 am ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
Fatzook wrote: monkey wrote: Fatzook wrote: monkey wrote: Fuck paying $4000 for a rear bar. The most i would pay for a rear bar would be no more than $500. I like the offroad-armoury rear bar. Well you won't get much for $500 I was waiting for someone to tell me $500 won't go far, but hey why pay when i could make it for fuck all.HAHA By all means make your own. But you aren't comparing apple with apples now are you. ARB's bar is a very complicated design. There would be dozens of components, and a labour intensive build process. ( probably use robots for most of it.... )I still don't think that $4K is any where near justifiable, but I am confident that even if YOU had the skill to make a similar bar, it would cost you considerably more than $500 to do so Yeh i know there is a lot of work in the ARB rear bar but i don't really won't anything like that bar i just want something that is plan and simple, hence the reason i'm going to make my own, so i can get exactly what i won't. |
|
| Author: | Ben_Sierra [ Wed Jan 19, 2011 6:27 am ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
Benz2369 wrote: Fatzook wrote: brindog wrote: Fatzook wrote: So you have $2500-3000 for a rear bar? Is that how much they are ?? Surely it wouldn't cost that much for one similar to the MIC one with a Jerry holder ? Worse. WAY worse!! I just rang ARB. A rear bar the same as in your pic for a 100 series live axle, inc colour coding is $3949.00 wow.... sure it looks nice... but not that nice! who would even buy one for that price? no suzuki owner i know i guess a toyota owner might though All the mining vehicles in the North West seem to have ARB bars... EDIT: unless they have factory bars, which are just as expensive... |
|
| Author: | brindog [ Wed Jan 19, 2011 8:30 am ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
Fatzook wrote: brindog wrote: Fatzook wrote: So you have $2500-3000 for a rear bar? Is that how much they are ?? Surely it wouldn't cost that much for one similar to the MIC one with a Jerry holder ? Worse. WAY worse!! I just rang ARB. A rear bar the same as in your pic for a 100 series live axle, inc colour coding is $3949.00 wow !!
Makes $2500 sound cheap !! haha
|
|
| Author: | monley [ Wed Jan 19, 2011 8:37 am ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
Just noticed something else on the jimny with the ARB rear bar, if you were to have something like that with the spare wheel of to one side it would look strange because the rear tail gate it not flat, it has the indentations were the spare wheel mouts to now. |
|
| Author: | vermin [ Wed Jan 19, 2011 8:57 am ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
Fatzook. I'll hold off buying this bar now if you stop posting and make me one 
|
|
| Author: | Fatzook [ Wed Jan 19, 2011 9:10 am ] |
| Post subject: | Re: Jimny steel rear bars and sliders |
vermin wrote: Fatzook. I'll hold off buying this bar now if you stop posting and make me one
Mate to be honest it looks like a great bar. Just beef up the mounts a little.' besides, I'm still trying to get last years products on the market 
|
|
| Page 1 of 2 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|