| auszookers.com https://auszookers.com/forum/ |
|
| What tailshaft suits a 1lt transfer https://auszookers.com/forum/viewtopic.php?f=5&t=18407 |
Page 1 of 1 |
| Author: | MR1JZ [ Thu Jan 20, 2011 12:42 pm ] |
| Post subject: | What tailshaft suits a 1lt transfer |
So my car came with a 1lt transfer which exploded I have since fitted a new 1lt transfer which is sweet as. Now my tailshaft unis have decided to die I need to know which end on the 1lt transfer is different and which tailshaft I can use in it. Can anyone shed some light? |
|
| Author: | MR1JZ [ Thu Jan 20, 2011 8:02 pm ] |
| Post subject: | Re: What tailshaft suits a 1lt transfer |
I know mine doesnt have the 4wd light switch...is that an early one? is it going to be easier to just get the uni's rebuilt? |
|
| Author: | MR1JZ [ Thu Jan 20, 2011 8:13 pm ] |
| Post subject: | Re: What tailshaft suits a 1lt transfer |
where did your post go 33's? |
|
| Author: | MR1JZ [ Thu Jan 20, 2011 10:28 pm ] |
| Post subject: | Re: What tailshaft suits a 1lt transfer |
spam alert which flange is different on the Tcase? is it the one that attaches to the main driveshaft from the gearbox or the one going to the rear diff? |
|
| Author: | shep [ Thu Jan 20, 2011 10:45 pm ] |
| Post subject: | Re: What tailshaft suits a 1lt transfer |
i have a late model 1.0 box here and the jack shaft and front tailshaft flanges are the same and the rear flange is the handbrake drum. no 4wd light is the early jobbie. i am sure that there are only 2 types of sierra uni's. early is internal circlip and late is external circlip, so just have a look at where the circlip is. |
|
| Author: | MR1JZ [ Thu Jan 20, 2011 10:54 pm ] |
| Post subject: | Re: What tailshaft suits a 1lt transfer |
well ive just realised ive got a spare rear tailshaft sitting in my shed...im going to do some custom drilling and make that fit on the weekend...if its the main shaft from the gearbox ill just get a new uni fitted next week |
|
| Author: | mrw82 [ Fri Jan 21, 2011 4:07 am ] |
| Post subject: | Re: What tailshaft suits a 1lt transfer |
you should be able to get a new uni joint for about $35. dont stuff around dodgying up a shaft to fit, just go buy and fit a new uni joint. |
|
| Author: | MR1JZ [ Fri Jan 21, 2011 4:28 am ] |
| Post subject: | Re: What tailshaft suits a 1lt transfer |
the slip yoke on my rear tailshaft is jammed so I need to replace it anyway i might get some new unis and do that yoke swap or something |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|