Nothing fits a coily
Any seat can be made to fit, but nothing will just bolt up that I'm aware of...
| auszookers.com https://auszookers.com/forum/ |
|
| sierra seats? https://auszookers.com/forum/viewtopic.php?f=5&t=18414 |
Page 1 of 1 |
| Author: | RUN.10W [ Fri Jan 21, 2011 2:01 am ] |
| Post subject: | sierra seats? |
hi guys Im being as pain again, does any one know where i can get material bucket seats for a 97 coil model sierra in Sydney or does any one now who can make/supply rails to go on say gti seats etc to bolt into a coily. No one i ring can help me and the seats in my coily are doing my head in. Cheers for the help guys |
|
| Author: | Ben_Sierra [ Fri Jan 21, 2011 3:25 am ] |
| Post subject: | Re: sierra |
Nothing fits a coily
Any seat can be made to fit, but nothing will just bolt up that I'm aware of... |
|
| Author: | RUN.10W [ Fri Jan 21, 2011 3:47 am ] |
| Post subject: | Re: sierra |
Yes this is true, im trying to locate a shop that will fit them for me etc i shall work something out just thought i would throw it out there... |
|
| Author: | Fatzook [ Fri Jan 21, 2011 5:12 am ] |
| Post subject: | Re: sierra |
I've done a few now. Your new seat selection is crutial to getting it to work. If you are buying something used from a wreckers, try and get one with a similar shaped base pan to your coily seats. One seat rail is higher than the other, so it helps to buy a seat with this arrangement, as you cannot re-use the coily rails. |
|
| Author: | Reubs [ Fri Jan 21, 2011 6:25 am ] |
| Post subject: | Re: sierra |
Fatzook wrote: , try and get one with a similar shaped base pan to your coily seats. One seat rail is higher than the other, so it helps to buy a seat with this arrangement, as you cannot re-use the coily rails.
I disagree. I have "trimmed" down the top of one of the rails and used 75x50x5 UA bolted into the rail holes to even out the height and mounted an Autotechnica seat in one of my coilies! Easy to do, uses the factory rails and you can mount an average "sports" seat on top. |
|
| Author: | Fatzook [ Fri Jan 21, 2011 7:23 am ] |
| Post subject: | Re: sierra |
Reubs wrote: Fatzook wrote: , try and get one with a similar shaped base pan to your coily seats. One seat rail is higher than the other, so it helps to buy a seat with this arrangement, as you cannot re-use the coily rails. I disagree. I have "trimmed" down the top of one of the rails and used 75x50x5 UA bolted into the rail holes to even out the height and mounted an Autotechnica seat in one of my coilies! Easy to do, uses the factory rails and you can mount an average "sports" seat on top. You must have a more sympathetic engineer than me. |
|
| Author: | Rusho [ Fri Jan 21, 2011 7:46 am ] |
| Post subject: | Re: sierra |
Fatzook wrote: Reubs wrote: Fatzook wrote: , try and get one with a similar shaped base pan to your coily seats. One seat rail is higher than the other, so it helps to buy a seat with this arrangement, as you cannot re-use the coily rails. I disagree. I have "trimmed" down the top of one of the rails and used 75x50x5 UA bolted into the rail holes to even out the height and mounted an Autotechnica seat in one of my coilies! Easy to do, uses the factory rails and you can mount an average "sports" seat on top. You must have a more sympathetic engineer than me. Engineer...what do you need them for 
|
|
| Author: | tombutt [ Fri Jan 21, 2011 8:00 am ] |
| Post subject: | Re: sierra seats? |
over rated road legal cars are boring |
|
| Author: | TryHard [ Fri Jan 21, 2011 9:42 am ] |
| Post subject: | Re: sierra seats? |
tombutt wrote: over rated road legal cars are boring
x2 |
|
| Author: | RUN.10W [ Fri Jan 21, 2011 7:02 pm ] |
| Post subject: | Re: sierra seats? |
Yea done the wrecker hunt yesterday though nothing really seems to come close enough to fitting  will keep researching thanks guys
|
|
| Author: | dp87 [ Sun Jan 23, 2011 6:45 am ] |
| Post subject: | Re: sierra seats? |
http://www.autosport.net.au/ this guy in kirrawee fitted 2 recaro recliner seats in my coily |
|
| Author: | RUN.10W [ Sun Jan 23, 2011 7:51 am ] |
| Post subject: | Re: sierra seats? |
What was that worth roughly? |
|
| Author: | paulv [ Sun Jan 23, 2011 8:06 am ] |
| Post subject: | Re: sierra seats? |
I managed to get Swift GTI seats into my coily. Was a bit of work, and involved cutting and welding.. |
|
| Author: | RUN.10W [ Sun Jan 23, 2011 8:42 am ] |
| Post subject: | Re: sierra seats? |
Yea the cutting and welding I'm not real keen on ha ha |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|