| auszookers.com https://auszookers.com/forum/ |
|
| tapping noise - VIDEO ADDED https://auszookers.com/forum/viewtopic.php?f=5&t=18437 |
Page 1 of 1 |
| Author: | grunta [ Sat Jan 22, 2011 12:52 am ] |
| Post subject: | tapping noise - VIDEO ADDED |
Hi All 
I have another wee prob with my 89 Samurai. It's making a tapping sound when driving. I reset the valve lash and thought that may have solved the problem but it hasn't. It's quite a loudish noise, hence why I thought it may have been the tappets. It doesn't make the noise when the engine is idling or if your not accelerating. I cant possible think what it may be. I havn't notice any decrease in engine performance or anything. Thanks, Grunta |
|
| Author: | atari4x4 [ Sat Jan 22, 2011 12:55 am ] |
| Post subject: | Re: tapping noise |
what sort of fuel are you running through it? if it's low grade you could be suffering from "pinging" pre ignition of the fuel. have you checked and replaced the basics like timing, spark plugs, dizzy cap & leads? |
|
| Author: | zukmeista [ Sat Jan 22, 2011 1:00 am ] |
| Post subject: | Re: tapping noise |
grunta wrote: Hi All
I have another wee prob with my 89 Samurai. It's making a tapping sound when driving. I reset the valve lash and thought that may have solved the problem but it hasn't. It's quite a loudish noise, hence why I thought it may have been the tappets. It doesn't make the noise when the engine is idling or if your not accelerating. I cant possible think what it may be. I havn't notice any decrease in engine performance or anything. Thanks, Grunta Mine does it too, but only when cold. Runningon 98 too 
|
|
| Author: | grunta [ Sat Jan 22, 2011 1:06 am ] |
| Post subject: | Re: tapping noise |
crickey, bloody quick replys 
It's not pinging as that was an issue I had awhile ago and solved that problem. It's got new plugs in it as well so it's not the plugs. I can rev the engine and the noise isn't there, but when driving it is. It has to be engine related though because when accelerating (not hard) it's there. But i can be cruising and it's not there. 
I'm running 95 through caltex |
|
| Author: | Teracis [ Sat Jan 22, 2011 1:08 am ] |
| Post subject: | Re: tapping noise |
I have a whine from my gearbox, and an occasional noisy tappet, Is it really hectic like something's loose/broken or is it just like something is louder than normal? |
|
| Author: | grunta [ Sat Jan 22, 2011 1:13 am ] |
| Post subject: | Re: tapping noise |
Teracis wrote: I have a whine from my gearbox, and an occasional noisy tappet, Is it really hectic like something's loose/broken or is it just like something is louder than normal?
Not sure if it's something broken. I don't think so because as stated about it's not there if i'm just cruising at "x" km/h but if i put it under abit of load it starts making the noise. If I have the engine idling and rev it - no noise. I'm thinking about putting the vehicle up on axle stands and getting someone to drive it through the gears and see if i can see where it's coming from |
|
| Author: | shep [ Sat Jan 22, 2011 1:54 am ] |
| Post subject: | Re: tapping noise |
i had a similar sounding noise which ended up being a missing rocker shaft retaining thingo screw |
|
| Author: | steak_knife [ Sat Jan 22, 2011 4:42 am ] |
| Post subject: | Re: tapping noise |
Could even be an exhaust leak.. |
|
| Author: | Jester [ Sat Jan 22, 2011 4:53 am ] |
| Post subject: | Re: tapping noise |
mine made an aweful tapping noise when the cam pulley let go |
|
| Author: | grunta [ Sat Jan 22, 2011 5:10 am ] |
| Post subject: | Re: tapping noise |
I hope the cam pulley is not about to go!  The thing that confues me is that it's not a constant noise - and i'm going to sound like a broken record here  but it's only when accelerating. I could be going 60km/h and just just have enough pressure on the gas to stay at 60km/h and no noise.
|
|
| Author: | TZAR [ Sat Jan 22, 2011 5:12 am ] |
| Post subject: | Re: tapping noise |
hole in exhaust or blown exhaust manifold gasket |
|
| Author: | Fluffy [ Sat Jan 22, 2011 5:36 am ] |
| Post subject: | Re: tapping noise |
I had a similar noise .. was a broken piston skirt on number 4 |
|
| Author: | LAY80N [ Sat Jan 22, 2011 3:36 pm ] |
| Post subject: | Re: tapping noise |
TZAR wrote: hole in exhaust or blown exhaust manifold gasket
Can you post a video of the noise up? Im thinking along the same lines ot TZAR here, if it only does it on acceleration check your exhaust manifold/gasket. Layto.... |
|
| Author: | grunta [ Sat Jan 22, 2011 4:32 pm ] |
| Post subject: | Re: tapping noise |
I'll try and get one this morning. |
|
| Author: | grunta [ Sat Jan 22, 2011 7:31 pm ] |
| Post subject: | Re: tapping noise |
here is a link to a video. http://s821.photobucket.com/albums/zz13 ... ant030.mp4 Thanks guys |
|
| Author: | Teracis [ Sat Jan 22, 2011 7:34 pm ] |
| Post subject: | Re: tapping noise - VIDEO ADDED |
That's a horrible bloody tapping noise! NFI what it is though! |
|
| Author: | grunta [ Sat Jan 22, 2011 7:37 pm ] |
| Post subject: | Re: tapping noise - VIDEO ADDED |
very much so! i just hope it's nothing too major really.
|
|
| Author: | puddlejumper [ Sat Jan 22, 2011 8:41 pm ] |
| Post subject: | Re: tapping noise - VIDEO ADDED |
Sounds like a exhaust manifold/gasket leak... |
|
| Author: | grunta [ Sat Jan 22, 2011 9:26 pm ] |
| Post subject: | Re: tapping noise - VIDEO ADDED |
cool, i hope it is just that. When i brought the vehicle it had a leak between the gasket and exhaust manifold and the guy re did it, but I can't remember if it's the same noise or not. The engine runs fine - as far as i know with these vehicles. Would i need a new gasket or can I clean up the old one a re glue it? Just out of interest how easily do these vehicles rev? I feel taking it up to 3 1/5 to 4k seems enough as it doesn't feel like your getting much more go out of it and it's not as a toyota 1300 which revs easy to 6-7k. Thanks guys for your input
|
|
| Author: | steak_knife [ Sat Jan 22, 2011 9:53 pm ] |
| Post subject: | Re: tapping noise - VIDEO ADDED |
grunta wrote: cool, i hope it is just that. When i brought the vehicle it had a leak between the gasket and exhaust manifold and the guy re did it, but I can't remember if it's the same noise or not. The engine runs fine - as far as i know with these vehicles. Would i need a new gasket or can I clean up the old one a re glue it? Just out of interest how easily do these vehicles rev? I feel taking it up to 3 1/5 to 4k seems enough as it doesn't feel like your getting much more go out of it and it's not as a toyota 1300 which revs easy to 6-7k.
Thanks guys for your input  Easy!!!!!
Rev it, they like it.. 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|