| auszookers.com https://auszookers.com/forum/ |
|
| Powersteering lines from vitara? https://auszookers.com/forum/viewtopic.php?f=5&t=18462 |
Page 1 of 1 |
| Author: | birko [ Sun Jan 23, 2011 4:45 am ] |
| Post subject: | Powersteering lines from vitara? |
Hey, Im just about half way through my ps conversion on my zook using the bent kit. However im just wondering where/how other people have mounted/run there lines and pump etc. The main problem im having is with the vitara line that runs from the box to the pump. Can i just cut/ shut this and join with a bit of hose and clamps? Or can it be used with a bit of bending? Pics will be much appreciated. Thanks |
|
| Author: | Rusho [ Sun Jan 23, 2011 5:36 am ] |
| Post subject: | Re: Powersteering lines from vitara? |
For what it's worth I just got new hoses. Cost around a $100 for both and you never have to worry about them again. |
|
| Author: | steak_knife [ Sun Jan 23, 2011 6:25 am ] |
| Post subject: | Re: Powersteering lines from vitara? |
Rusho wrote: For what it's worth I just got new hoses. Cost around a $100 for
both and you never have to worry about them again. Ditto, & I fitted a cooler just cause I can.. 
But I only paid $50 for the new hoses... 
|
|
| Author: | birko [ Sun Jan 23, 2011 7:40 am ] |
| Post subject: | Re: Powersteering lines from vitara? |
ok, just want to fit the original hoses for now. Ive got the pump to box one sorted, just looking for ideas on mounting the bottle. My nice clean engine bay is starting to look as cramped as a modern car  with the baleno motor, falcon alt, thermos, new fuse box, power steer etc etc
|
|
| Author: | steak_knife [ Sun Jan 23, 2011 7:46 am ] |
| Post subject: | Re: Powersteering lines from vitara? |
birko wrote: ok, just want to fit the original hoses for now. Ive got the pump to box one sorted, just looking for ideas on mounting the bottle. My nice clean engine bay is starting to look as cramped as a modern car
with the baleno motor, falcon alt, thermos, new fuse box, power steer etc etcAny way ya can then, I was "lucky" enough to have got a set of hoses out of a wreck, so bent in almost the right spot's to fit. |
|
| Author: | birko [ Sun Jan 23, 2011 7:52 am ] |
| Post subject: | Re: Powersteering lines from vitara? |
yep, thats what i worked out. Was kinda doing my head in today but all sorted now. Just gotta work a good spot for the bottle? |
|
| Author: | steak_knife [ Sun Jan 23, 2011 8:09 am ] |
| Post subject: | Re: Powersteering lines from vitara? |
I welded a bracket of the rad support next to the rad overflow botbot... |
|
| Author: | mnemonix [ Sun Jan 23, 2011 8:10 am ] |
| Post subject: | Re: Powersteering lines from vitara? |
I used the vitara hoses originally and just bent the hard line to make the length suit. Eventually it fractured along that bend so I cut and joined it with a piece of hose. Been ok ever since. |
|
| Author: | birko [ Sun Jan 23, 2011 9:33 am ] |
| Post subject: | Re: Powersteering lines from vitara? |
Ok, So after searching and looking at a few pics most seem to mount on the rad support. But i didnt want to move the overflow so i mounted it on the washer bottle bracket behind the headlight and moved the washer bottle more towards the firewall (in my case wedged up to the 2nd battery). So these hoses just with hose clamps can be used? On what line would a cooler be placed? The bigger one? |
|
| Author: | steak_knife [ Sun Jan 23, 2011 9:36 am ] |
| Post subject: | Re: Powersteering lines from vitara? |
birko wrote: So these hoses just with hose clamps can be used? On what line would a cooler be placed? The bigger one? The one from the box to the res, to the pump, that's the low pressure/return line, so it replaces the steel line from box to res, but it is a good idea to replace the H/p line when you can.. |
|
| Author: | birko [ Sun Jan 23, 2011 9:46 am ] |
| Post subject: | Re: Powersteering lines from vitara? |
yep id say i will get new hoses, just wanna get it up and running as ive got a ton of other jobs to do on it whiles its off the road. What kind of places make up PS lines? Brake places? |
|
| Author: | hooki [ Sun Jan 23, 2011 3:38 pm ] |
| Post subject: | Re: Powersteering lines from vitara? |
enzed should be able to make them up. |
|
| Author: | rick1970 [ Sun Jan 23, 2011 3:42 pm ] |
| Post subject: | Re: Powersteering lines from vitara? |
Take your old hose/tube to your local hydraulic shop and they should be able to sort you out. |
|
| Author: | tmb99 [ Tue Jun 21, 2011 3:47 am ] |
| Post subject: | Re: Powersteering lines from vitara? |
Anyone able to put up a pic of their lines fitted? The box/pump I brought has the lines all cut off. Been searching the 100's of threads for the last hour but none have pics of the lines fitted. Thanks |
|
| Author: | birko [ Tue Jun 21, 2011 11:05 am ] |
| Post subject: | Re: Powersteering lines from vitara? |
my build up thread should have some |
|
| Author: | tmb99 [ Wed Jun 22, 2011 3:43 am ] |
| Post subject: | Re: Powersteering lines from vitara? |
Cheers, few pics here. I'm going to have a mobile guy come out and make up some lines, seems the easiest seeing as I have nothing to go off. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|