There in good condition. Where in Melb are you. you can try them for size, and if they Rub then bad luck to me.
I had them on my sierra with no rub on springs and they were very wide
| auszookers.com https://auszookers.com/forum/ |
|
| Rim Offset https://auszookers.com/forum/viewtopic.php?f=5&t=18489 |
Page 1 of 1 |
| Author: | DRK_ZOOK [ Mon Jan 24, 2011 12:17 am ] |
| Post subject: | Rim Offset |
IV got at sj70 with 2in body and 2in spring lift and i was wondering what is the best rim off set so 31x10.5x15 dont hit on full lock. I want them to sit out wide past the factory flares as iv got bigger flares to go on |
|
| Author: | tanshi [ Mon Jan 24, 2011 12:21 am ] |
| Post subject: | Re: Rim Offset |
i have -25 offset rims and my 31s still scrub slightly on the springs. standard rims are +5 so thats around 30mm wider each side. |
|
| Author: | DRK_ZOOK [ Mon Jan 24, 2011 12:22 am ] |
| Post subject: | Re: Rim Offset |
Can you go bigger than -25 and where did you get your rims from |
|
| Author: | BlueSuzy [ Mon Jan 24, 2011 12:34 am ] |
| Post subject: | Re: Rim Offset |
speedy/king wheels will only do a -25. 5 stud 15x8 They used to do a -28. In my avatar, stock flares with 3" rubber covered -28 15x8 33x12.5 Otherwise, rockcrawler rims, which get costly but with more offsets, or go custom Most people buy rims and tyres, then get flares to suit. |
|
| Author: | lockdup [ Mon Jan 24, 2011 2:01 am ] |
| Post subject: | Re: Rim Offset |
Hey mate, I've got some sunny's for sale on 31" x 11.5 tyres. A/t. You can come and try them on your car and If your happy you can buy them. The rims have a big offset. |
|
| Author: | DRK_ZOOK [ Mon Jan 24, 2011 2:15 am ] |
| Post subject: | Re: Rim Offset |
How much and what condition are they in |
|
| Author: | DRK_ZOOK [ Mon Jan 24, 2011 2:34 am ] |
| Post subject: | Re: Rim Offset |
I curruntly have 15x7 ROH Trak 2 with 31x10.5 wich have a 3P off set so if i was to buy a set of 15x8 with -25 off set this would make it sit heaps wider and help with my scrubing on full lock, is this correct ? i wont to get the off set right the first time. |
|
| Author: | BlueSuzy [ Mon Jan 24, 2011 2:36 am ] |
| Post subject: | Re: Rim Offset |
It will stop the scrubbing on full lock, but it may move the scrubing somewhere else. Can be fixed with a BFH |
|
| Author: | tanshi [ Mon Jan 24, 2011 2:40 am ] |
| Post subject: | Re: Rim Offset |
it will move your tyres away from your springs and toward your bullbar and firewall. |
|
| Author: | BlueSuzy [ Mon Jan 24, 2011 2:44 am ] |
| Post subject: | Re: Rim Offset |
Don't be scared, get them and make them work. It won't be hard. |
|
| Author: | lockdup [ Mon Jan 24, 2011 3:16 am ] |
| Post subject: | Re: Rim Offset |
There in good condition. Where in Melb are you. you can try them for size, and if they Rub then bad luck to me. I had them on my sierra with no rub on springs and they were very wide
|
|
| Author: | DRK_ZOOK [ Mon Jan 24, 2011 6:19 am ] |
| Post subject: | Re: Rim Offset |
im in nunawading area |
|
| Author: | lockdup [ Mon Jan 24, 2011 10:39 pm ] |
| Post subject: | Re: Rim Offset |
Im in Narre Warren, Pm me if your interested |
|
| Author: | Fatzook [ Tue Jan 25, 2011 12:12 am ] |
| Post subject: | Re: Rim Offset |
DRK_ZOOK wrote: im in nunawading area lockdup wrote: Im in Narre Warren, Pm me if your interested
Are you blokes just making words up?  
|
|
| Author: | LAY80N [ Tue Jan 25, 2011 4:58 am ] |
| Post subject: | Re: Rim Offset |
Fatzook wrote: DRK_ZOOK wrote: im in nunawading area lockdup wrote: Im in Narre Warren, Pm me if your interested Are you blokes just making words up? Its mexican 
Layto.... |
|
| Author: | lockdup [ Wed Jan 26, 2011 10:19 am ] |
| Post subject: | Re: Rim Offset |
Pics are up in the for sale section |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|