| auszookers.com https://auszookers.com/forum/ |
|
| sj410/413 transfer case differences https://auszookers.com/forum/viewtopic.php?f=5&t=18493 |
Page 1 of 1 |
| Author: | bieebs! [ Mon Jan 24, 2011 2:00 am ] |
| Post subject: | sj410/413 transfer case differences |
sorry in advance if this issue has been raised, however i tried searching with nooo luck.. :S keeeen to swap a later transfer case into my 82 sierra.. so just wondering if the externals are diffent too (tcase mounts/ flanges) or solely internal? if theyre the same, is there any real advantage in running the 1.0l?? (besides gear ratio) reason being i would like crawler gears.. + the bearings in mine are screwed.. sj413 cases are the same as the samurais yes? cheeers, stephen |
|
| Author: | tanshi [ Mon Jan 24, 2011 2:17 am ] |
| Post subject: | Re: sj410/413 transfer case differences |
if your 410 case has the 4x4 switch on it then you can put crawler gears in the case you have. if its the non 4x4 switch one they are nothing alike. |
|
| Author: | bieebs! [ Mon Jan 24, 2011 5:33 am ] |
| Post subject: | Re: sj410/413 transfer case differences |
99% sure no light. so to swap in 1.3 case i have to make adapter plates for the tcase mounts? what about flanges? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|