auszookers.com
https://auszookers.com/forum/

Side Awning Mounting
https://auszookers.com/forum/viewtopic.php?f=5&t=18505
Page 1 of 1

Author:  Christian [ Mon Jan 24, 2011 11:26 am ]
Post subject:  Side Awning Mounting

i bought an opensky awning for the side of my car the other day.
ive got rola roof racks to mount them on, the 4wd shop i bought the awning from suggested that i just drill L brackets into the roof racks and mount it on that... i'm going to use the L bracket idea, except find another way to mount the l brackets to the roof racks, i dont really want to drill into the rack.

anybody got any ideas (and or pictures) to mount the L brackets to the roof rack?

Cheers
Christian

Author:  Benz [ Mon Jan 24, 2011 11:33 am ]
Post subject:  Re: Side Awning Mounting

do the rola racks have a track down the middle of the cross bars?

I used that.

Author:  Christian [ Mon Jan 24, 2011 11:37 am ]
Post subject:  Re: Side Awning Mounting

yeah they do, although mine has a rubber strip down the middle covering the track. i guess i can cut it up if needed. did you just use t headed bolts
i.e http://www.rola.com.au/prodimages/inst_279_s_l.jpg

can you buy these from bunnings or the like?

Author:  Benz [ Mon Jan 24, 2011 11:39 am ]
Post subject:  Re: Side Awning Mounting

http://www.rhinorack.com.au/AccSubCateg ... 04_35.aspx

I have a sports rola rack and used the fittings above. had to grind them a tiny bit to them them fit. but that only took 10 secs on a angel grinder.

was unable to find the proper rola rack ones but i'm sure they make them.

Author:  Benz [ Mon Jan 24, 2011 11:41 am ]
Post subject:  Re: Side Awning Mounting

haha yeah you can take that strip out, trim it up and slide it back in.

the local store for rola in my town are pathetic... that's why i use rhino ones

Author:  Christian [ Mon Jan 24, 2011 11:51 am ]
Post subject:  Re: Side Awning Mounting

cool. did you just bend up your own L brackets?

Author:  atari4x4 [ Mon Jan 24, 2011 12:53 pm ]
Post subject:  Re: Side Awning Mounting

these are the rola ones for the sports racks.

Image

Image

http://www.rola.com.au/trade-accessories.aspx

Author:  TheOtherLeft [ Mon Jan 24, 2011 9:51 pm ]
Post subject:  Re: Side Awning Mounting

atari4x4 wrote:
these are the rola ones for the sports racks.

Image

Image

http://www.rola.com.au/trade-accessories.aspx


Geez they ain't cheap!!! 8O

Author:  Benz [ Mon Jan 24, 2011 11:15 pm ]
Post subject:  Re: Side Awning Mounting

Christian wrote:
cool. did you just bend up your own L brackets?


nah a set came with the awning.

and the price is also a reason I didn't use rola ones

Author:  nato78 [ Tue Jan 25, 2011 1:25 am ]
Post subject:  Re: Side Awning Mounting

You can pull the rubber strip out and use a couple of uni strut nuts inside the rack to hold the L bracket onto the rack, that's how I mounted mine. I also mine with the L turned down over the end of the rack rather than up, so that the awning wasn't sticking way up in the air

Author:  Christian [ Tue Jan 25, 2011 4:20 am ]
Post subject:  Re: Side Awning Mounting

yeah i was planning on mounting it downwards.
might go visit bunnings first then see i i can get some bolts that fit in the track

cheers

Author:  Chop [ Tue Jan 25, 2011 5:12 am ]
Post subject:  Re: Side Awning Mounting

Yeah bunnings have cheap brackets, i used some L-shaped brackets on my awning. Although i doubt you could use them like i have because you have rola.

Image

Image

I was able to bolt them in the channel, where you cant see it.

Author:  Christian [ Wed Jan 26, 2011 11:26 pm ]
Post subject:  Re: Side Awning Mounting

thanks for the help!
ended up get a 100x100x40 bracket, some washers and nylon lock nuts from bunnings, went over the road to autoone( or was it pro) whom sold thule bars, thule do this kit for mounting some of thier stuff, turn out its been made to be compatible with other types of bars (including rola).

was able to mount the brackets downwards without it fowling on the door.
anywhos its now sitting on the side of my car.

cheers all
Christian

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/