SCSW
| auszookers.com https://auszookers.com/forum/ |
|
| sealed L.E.D tail lights into standard shape https://auszookers.com/forum/viewtopic.php?f=5&t=18593 |
Page 1 of 1 |
| Author: | skelaaleks [ Thu Jan 27, 2011 7:09 am ] |
| Post subject: | sealed L.E.D tail lights into standard shape |
Does anybody know if you are able to buy sealed led tail lights for a sierra? if so where and how much? thanks aleks |
|
| Author: | alien [ Thu Jan 27, 2011 7:10 am ] |
| Post subject: | Re: sealed L.E.D tail lights into standard shape |
nope... they dont exist. most who have done it have used the factory screw holes in the bumper to hold a piece of sheetmetal cut to shape that has a new hole in the middle to hold a smaller sized light set. |
|
| Author: | skelaaleks [ Thu Jan 27, 2011 7:14 am ] |
| Post subject: | Re: sealed L.E.D tail lights into standard shape |
hmm then does anybody have a cheap driver side body. (my lens is fine but but the rest is all rusted out) i need it so i can go to scenic rim this weekend |
|
| Author: | steak_knife [ Thu Jan 27, 2011 8:18 am ] |
| Post subject: | Re: sealed L.E.D tail lights into standard shape |
skelaaleks wrote: hmm then does anybody have a cheap driver side body. (my lens is fine but but the rest is all rusted out)
i need it so i can go to scenic rim this weekend yes, but tha plug was cut off it, nothing a soldering iron won't fix tho.. |
|
| Author: | want33s [ Thu Jan 27, 2011 9:03 am ] |
| Post subject: | Re: sealed L.E.D tail lights into standard shape |
SCSW
|
|
| Author: | skelaaleks [ Thu Jan 27, 2011 9:06 am ] |
| Post subject: | Re: sealed L.E.D tail lights into standard shape |
Hey steaky can you please pm me your number if you are in brissy Scsw?? |
|
| Author: | steak_knife [ Thu Jan 27, 2011 9:09 am ] |
| Post subject: | Re: sealed L.E.D tail lights into standard shape |
skelaaleks wrote: Hey steaky can you please pm me your number if you are in brissy
Scsw?? Sunny* Coast Sierra Wrecker's *  Sunny...
|
|
| Author: | want33s [ Thu Jan 27, 2011 9:53 am ] |
| Post subject: | Re: sealed L.E.D tail lights into standard shape |
steak_knife wrote: Sunny* Coast Sierra Wrecker's
* Sunny... *Sunshine, you language butcher.......... |
|
| Author: | 303zuke [ Thu Jan 27, 2011 10:12 am ] |
| Post subject: | Re: sealed L.E.D tail lights into standard shape |
steak_knife wrote: skelaaleks wrote: Hey steaky can you please pm me your number if you are in brissy Scsw?? Sunny* Coast Sierra Wrecker's * Sunny... Supa Cheap Sierra Wreckers! |
|
| Author: | skelaaleks [ Thu Jan 27, 2011 11:43 am ] |
| Post subject: | Re: sealed L.E.D tail lights into standard shape |
Haha Thanks guys I'll give steaky a call first. Tommorow sometime. ( I don't think he would like it to much If I called him now) |
|
| Author: | shep [ Thu Jan 27, 2011 9:10 pm ] |
| Post subject: | Re: sealed L.E.D tail lights into standard shape |
i have narva ADR compliant (as opposed to trailer) lights on my sierra. to get them to fit in the stock possie i had to make the hole around 1mm wider and using the stock light mounts i bolted a bit of tin in and then mounted the lights to the tin. 
|
|
| Author: | steak_knife [ Fri Jan 28, 2011 7:14 am ] |
| Post subject: | Re: sealed L.E.D tail lights into standard shape |
shep wrote: i have narva ADR compliant (as opposed to trailer) lights on my sierra. to get them to fit in the stock possie
i had to make the hole around 1mm wider and using the stock light mounts i bolted a bit of tin in and then mounted the lights to the tin. I like that car... 
But for the trailer light's, I have ADR compliant light's, LED's with in built reflector's that are ADR approved.. |
|
| Author: | shep [ Fri Jan 28, 2011 9:10 am ] |
| Post subject: | Re: sealed L.E.D tail lights into standard shape |
mine are adr for a car most (all) that dont have a reverse light are only adr for a trailer. cross check the numbers on the light with the relevant adr. i would be stunned if any one would ever get pinged for it but. |
|
| Author: | royce [ Fri Jan 28, 2011 9:16 am ] |
| Post subject: | Re: sealed L.E.D tail lights into standard shape |
separate ADR for stop, tail, reverse and indicator, just put an ADR compliant Reverse light on with it and you are covered |
|
| Author: | steak_knife [ Fri Jan 28, 2011 9:53 am ] |
| Post subject: | Re: sealed L.E.D tail lights into standard shape |
royce wrote: separate ADR for stop, tail, reverse and indicator, just put an ADR compliant Reverse light on with it and you are covered
 front parker??
It's white, & at the back, come's on with rev, must be rev light's... 
|
|
| Author: | want33s [ Fri Jan 28, 2011 10:05 am ] |
| Post subject: | Re: sealed L.E.D tail lights into standard shape |
Reverse lights are not a RWC requirement in Qld.... Why is it that some lights are legal for use on a trailer but not on a car... Surely both need to be equally visible at night as if I'm towing my Zook on my trailer you can't see my Patrol tail lights..... |
|
| Author: | royce [ Fri Jan 28, 2011 10:35 am ] |
| Post subject: | Re: sealed L.E.D tail lights into standard shape |
want33s wrote: Reverse lights are not a RWC requirement in Qld....
Since 1972 they certainly are |
|
| Author: | shep [ Fri Jan 28, 2011 11:17 am ] |
| Post subject: | Re: sealed L.E.D tail lights into standard shape |
i thought there were different requirements for the angles that the lights can be seen. |
|
| Author: | skelaaleks [ Fri Jan 28, 2011 10:07 pm ] |
| Post subject: | Re: sealed L.E.D tail lights into standard shape |
Trailers dot need the rev lights. If the car comes standard with rev lights it needs them. If a trailer has rev light mounted but don't work you will get pinged. |
|
| Author: | want33s [ Sat Jan 29, 2011 4:04 am ] |
| Post subject: | Re: sealed L.E.D tail lights into standard shape |
royce wrote: want33s wrote: Reverse lights are not a RWC requirement in Qld.... Since 1972 they certainly are I've spent the last hour and a bit searching the web for info on this... ADR 1/00 Reversing lamps... Introduced 1973 and last revised 2005 covers the approval and fitting/use of reversing lamps but nowhere does it say they are compulsory on a vehicle.... http://www.comlaw.gov.au/Details/F2005L03873 I have spoken to two local RWC mechanics (both officious bastards) and both said that reverse lamps, if fitted, must work but there is no requirement for them. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|