| auszookers.com https://auszookers.com/forum/ |
|
| help with coil spacer's https://auszookers.com/forum/viewtopic.php?f=5&t=18621 |
Page 1 of 1 |
| Author: | ellis [ Fri Jan 28, 2011 6:54 am ] |
| Post subject: | help with coil spacer's |
well finaly got 1 installed and it looks really dodgy doe's any1 know if this is how they are ment 2 look and this is my frist time trying 2 put pics up so if it doe's not work i will repost |
|
| Author: | tombutt [ Fri Jan 28, 2011 6:56 am ] |
| Post subject: | Re: help with coil spacer's |
with my vit i used the coil spacer then the original rubber to locate the spring |
|
| Author: | ellis [ Fri Jan 28, 2011 6:59 am ] |
| Post subject: | Re: help with coil spacer's |
do u mean spacer rubber then coil on mine it looks like if i did it that way the coil would just slip to the side |
|
| Author: | steak_knife [ Fri Jan 28, 2011 8:05 am ] |
| Post subject: | Re: help with coil spacer's |
ellis wrote: do u mean spacer rubber then coil on mine it looks like if i did it that way the coil would just slip to the side
tomsbum's on the money, there is a rubber seat in the top of the spring thingy, peel it out, fit dodgy lift & then put the rubber on, but they can still slip, hence the dodge part.. |
|
| Author: | christover1 [ Fri Jan 28, 2011 8:57 am ] |
| Post subject: | Re: help with coil spacer's |
On my Vit rear, I needed a bumpstop spacer, to stop spring moving sideways, after a 50mm coil spacer lift. Front was plenty long enuff, but I added a bumpstop spacer for other reasons |
|
| Author: | christover1 [ Fri Jan 28, 2011 8:59 am ] |
| Post subject: | Re: help with coil spacer's |
|
|
|
| Author: | Brett [ Fri Jan 28, 2011 7:41 pm ] |
| Post subject: | Re: help with coil spacer's |
all those spacers are dodgy as. they should have the spring locators made into them so the spring cant move around. have a look at the buget 2" lit spacer on low range for a vitara. i have a set in my vitara and just set for another set for the new one. |
|
| Author: | christover1 [ Fri Jan 28, 2011 8:27 pm ] |
| Post subject: | Re: help with coil spacer's |
Brett wrote: all those spacers are dodgy as. they should have the spring locators made into them so the spring cant move around. have a look at the buget 2" lit spacer on low range for a vitara. i have a set in my vitara and just set for another set for the new one.
It does make sense to me, but maybe somebody knows better. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|