| auszookers.com https://auszookers.com/forum/ |
|
| No. of teeth on ring gear? https://auszookers.com/forum/viewtopic.php?f=5&t=18623 |
Page 1 of 1 |
| Author: | birko [ Fri Jan 28, 2011 7:42 am ] |
| Post subject: | No. of teeth on ring gear? |
Hey, Got a complete diff to swap into my car whilst i rebuild my current one. Just wondering if counting the teeth on the ring gear is ok for checking the ratio's. I count 42 teeth on the one in swapping and mine that on the car atm. I have a spare rear centre laying around that counts 44 teeth. So im guessing 42 teeth is 3.7:1 44 teeth is 3.9:1 ?? Also did early WT (89) come with NT driveshaft bolt patterns? |
|
| Author: | birko [ Fri Jan 28, 2011 7:46 am ] |
| Post subject: | Re: No. of teeth on ring gear? |
oh hang on maybe its 41 and 43 respectivly as i counted the marked one twice |
|
| Author: | CairnsZook [ Fri Jan 28, 2011 7:50 am ] |
| Post subject: | Re: No. of teeth on ring gear? |
Count the teeth on the pinion too. Ring Pinion = ratio |
|
| Author: | birko [ Fri Jan 28, 2011 8:00 am ] |
| Post subject: | Re: No. of teeth on ring gear? |
diff are complete, counting through the drain hole. I think pinions are the same? |
|
| Author: | steak_knife [ Fri Jan 28, 2011 8:24 am ] |
| Post subject: | Re: No. of teeth on ring gear? |
birko wrote: diff are complete, counting through the drain hole. I think pinions are the same?
11 from memory... just cut different... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|