auszookers.com
https://auszookers.com/forum/

Iron Man suspension lift kit.few questions
https://auszookers.com/forum/viewtopic.php?f=5&t=18627		 Page 1 of 1
Author:  gregwatkins75 [ Fri Jan 28, 2011 9:03 am ]
Post subject:  Iron Man suspension lift kit.few questions
looking for some advice, just fitted up an iron man lift kit, bout 50mm lift, any way, looking at the two front springs they seem to have a bit of a ben to them when at rest.. are extended coild or any coils on the front of a vit suposed to have a slight bend in them,
Also on the drivers side of the transfer case there is a round alloy thing with a rubber center, is it supposed to be bolted to the transfer case? is it a mount? what size bolt goes through it?
cheers in advance
Author:  atari4x4 [ Fri Jan 28, 2011 9:06 am ]
Post subject:  Re: Iron Man suspension lift kit.few questions
pics?
Author:  gregwatkins75 [ Fri Jan 28, 2011 9:08 am ]
Post subject:  Re: Iron Man suspension lift kit.few questions
tommorow. dark now
Author:  Chop [ Fri Jan 28, 2011 9:31 am ]
Post subject:  Re: Iron Man suspension lift kit.few questions
Where's Macbear when ya need him? :roll:
Author:  atari4x4 [ Fri Jan 28, 2011 9:34 am ]
Post subject:  Re: Iron Man suspension lift kit.few questions
Chop wrote:
Where's Macbear when ya need him? :roll:


he shoots.... and he scores :lol:
Author:  christover1 [ Fri Jan 28, 2011 11:01 am ]
Post subject:  Re: Iron Man suspension lift kit.few questions
A bend like this?
This is ok, if thats what you meant.

Image
Author:  Teracis [ Fri Jan 28, 2011 11:02 am ]
Post subject:  Re: Iron Man suspension lift kit.few questions
atari4x4 wrote:
Chop wrote:
Where's Macbear when ya need him? :roll:


he shoots.... and he scores :lol:


I read that as MacGyver!
Author:  gregwatkins75 [ Fri Jan 28, 2011 11:03 am ]
Post subject:  Re: Iron Man suspension lift kit.few questions
ha exactly like that.....................
Author:  gregwatkins75 [ Fri Jan 28, 2011 11:04 am ]
Post subject:  Re: Iron Man suspension lift kit.few questions
what about the transfer case, strange thing next to it?????? its just a mount bush isnt it? anyidea on the size bolt that goes through
Author:  christover1 [ Fri Jan 28, 2011 11:04 am ]
Post subject:  Re: Iron Man suspension lift kit.few questions
Teracis wrote:
atari4x4 wrote:
Chop wrote:
Where's Macbear when ya need him? :roll:


he shoots.... and he scores :lol:


I read that as MacGyver!

I just watched that today...in its hey day was brilliant.
A bit lame now, but good for nostalgics
Author:  christover1 [ Fri Jan 28, 2011 11:06 am ]
Post subject:  Re: Iron Man suspension lift kit.few questions
gregwatkins75 wrote:
what about the transfer case, strange thing next to it?????? its just a mount bush isnt it? anyidea on the size bolt that goes through

no idea sorry. maybe tomorrow will all be clearer.
dark outside here too :D
Author:  gregwatkins75 [ Fri Jan 28, 2011 11:08 am ]
Post subject:  Re: Iron Man suspension lift kit.few questions
mmm. think I might get a service manual tommorow.... instead of guessing and hitting with a BFH when things dont work.
Author:  christover1 [ Fri Jan 28, 2011 11:11 am ]
Post subject:  Re: Iron Man suspension lift kit.few questions
gregwatkins75 wrote:
mmm. think I might get a service manual tommorow.... instead of guessing and hitting with a BFH when things dont work.

As a long term zook owner/driver
I have learnt to carry a BFH as part of the normal travel tools :lol:
Manual is a wise investment.
Author:  atari4x4 [ Fri Jan 28, 2011 11:42 am ]
Post subject:  Re: Iron Man suspension lift kit.few questions
it sounds like it's a NVH dampener Greg, sort of looks like an engine/gearbox mount? there is only 1 transfer mount & thats on the bottom of the case on cross member.
Author:  gregwatkins75 [ Fri Jan 28, 2011 12:51 pm ]
Post subject:  Re: Iron Man suspension lift kit.few questions
should have a bolt through it though shouldnt it?
Author:  Ben_Sierra [ Fri Jan 28, 2011 1:16 pm ]
Post subject:  Re: Iron Man suspension lift kit.few questions
christover1 wrote:
gregwatkins75 wrote:
mmm. think I might get a service manual tommorow.... instead of guessing and hitting with a BFH when things dont work.

As a long term zook owner/driver
I have learnt to carry a BFH as part of the normal travel tools :lol:
Manual is a wise investment.


You're not a real Zook driver til you've hit something with a BFH on the side of a track in the middle of nowhere ;)
Author:  atari4x4 [ Fri Jan 28, 2011 1:25 pm ]
Post subject:  Re: Iron Man suspension lift kit.few questions
where is it on the transfercase? if it's not attached to the crossmember & case i'd saw it's a NVH dampener.
Author:  gregwatkins75 [ Fri Jan 28, 2011 1:27 pm ]
Post subject:  Re: Iron Man suspension lift kit.few questions
its actually next to transfer case, a seperate round alloy thing woth a rubber center.. 1 earth wire attached to it and thats it
Author:  MacDaddy [ Fri Jan 28, 2011 6:12 pm ]
Post subject:  Re: Iron Man suspension lift kit.few questions
Chop wrote:
Where's Macbear when ya need him? :roll:


Ha Ha Ha... i am here, just watchin whats being said here... see if any, and what amount of BS gets dribbled, or if gregwatkins75's question actually gets answered...

Yes the Bow/Bend in the coil, like in christover1's pic, is perfectly normal...
So how do you find the Ironman Suspension ?

As for the other inquiry, will need a pic to see what you are referring too... :D
Author:  banga [ Fri Jan 28, 2011 6:55 pm ]
Post subject:  Re: Iron Man suspension lift kit.few questions
i think it is a mount i seen it the other day on my chassis sitting under the house haven't looked at my car to see whether it is connected. i just went and looked for you no time to take picks but it does have a bolt through it. 2 bolts go through the tcase mount and another bracket bolts to the tcase with 2 bolts then one goes through the round bit looked like about a 10 or 12mm socket.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/