| auszookers.com https://auszookers.com/forum/ |
|
| want to build comp truck https://auszookers.com/forum/viewtopic.php?f=5&t=18653 |
Page 1 of 3 |
| Author: | reece [ Sat Jan 29, 2011 8:54 pm ] |
| Post subject: | want to build comp truck |
Hi am new to this forum and zooks aswell but I'm looking at getting a 82 suzuki sierra softtop which I would like to build into a mild comp truck. I was thinking of hilux coild diffs, bigger motor (maybe vr,vs efi 6 motor) and ute conversion with tube tray. Any idaes or pictures would be great as I am keen to do it as I think they look good when done up. |
|
| Author: | inbits [ Sat Jan 29, 2011 9:02 pm ] |
| Post subject: | Re: want to build comp truck |
Forget the v6 and use a 1.6 efi |
|
| Author: | 5ierra [ Sat Jan 29, 2011 9:20 pm ] |
| Post subject: | Re: want to build comp truck |
Need to work out what competitions you want to compete in and see what the rulings are on modifications. |
|
| Author: | coneykid [ Sat Jan 29, 2011 9:27 pm ] |
| Post subject: | Re: want to build comp truck |
Buy my car, start with that. Sell off the parts you don't want. http://auszookers.com/index.php?name=Fo ... ic&t=18070 |
|
| Author: | reece [ Sat Jan 29, 2011 9:30 pm ] |
| Post subject: | Re: want to build comp truck |
What if I was to make it as a fun car with the boys. I am keen to change it over to coils though and I read about oatis from 4wd monthly and it had a holden 6 in it and went good. I am trying to find info on the conversion but not sure what to ask for. Forgive my lack on knowledge but keen for any replys. |
|
| Author: | reece [ Sat Jan 29, 2011 9:33 pm ] |
| Post subject: | Re: want to build comp truck |
I would love to but picked up car for $100 with 2 motors and some spares. Not much rust in it but know a good panel beater and painter thats willing to help out for good price. |
|
| Author: | shakes [ Sat Jan 29, 2011 10:35 pm ] |
| Post subject: | Re: want to build comp truck |
If it's a cheap fun car with the boy's 31's, 1ltr transfer or gears. welded rear and a body lift if you don't want to cut too much of the body work. change the shocks to something a little longer and off you go. That combo will keep up and often show up big patrols/cruisers/rovers once you learn to pilot it. If you are looking to compete, as 5ierra said decide which class and comp's you want to compete in and build the truck around that. the V6 definately wouldn't be my first pick of motor. And many here will argue well against it... Hang around look at a few builds and get a better idea of exactly what you want out of the car first. |
|
| Author: | LAY80N [ Sat Jan 29, 2011 11:18 pm ] |
| Post subject: | Re: want to build comp truck |
reece wrote: What if I was to make it as a fun car with the boys.
I am keen to change it over to coils though and I read about oatis from 4wd monthly and it had a holden 6 in it and went good. I am trying to find info on the conversion but not sure what to ask for. Forgive my lack on knowledge but keen for any replys. Please dont say Otis and good in the same scentance. Layto.... |
|
| Author: | reece [ Sat Jan 29, 2011 11:21 pm ] |
| Post subject: | Re: want to build comp truck |
Why not ?. |
|
| Author: | Red89 [ Sat Jan 29, 2011 11:24 pm ] |
| Post subject: | Re: want to build comp truck |
What is your mechanical background, do you plan on doing all the work yourself or getting someone else to do it ? And what is your 4wding background ? If this is your first attempt on both accounts then your best bet is to keep it simple, a basic well modded Sierra will show up most cars out there. |
|
| Author: | reece [ Sat Jan 29, 2011 11:39 pm ] |
| Post subject: | Re: want to build comp truck |
I am pretty handy with my hands and what I don't I search for and get info. I have built up a gu and an 80 series with lifts and other mods. If I get stuck I know a good group of guy's that can help me out. I have all ways wanted to build up a suzuki but nothing has come up before where I can get for good price. I'm not worried if it takes me a couple of years as I would like to get it right instead of doing it twice. I wouldn't mind something like this 
|
|
| Author: | Red89 [ Sun Jan 30, 2011 12:02 am ] |
| Post subject: | Re: want to build comp truck |
My advice then would be. Widetrack diffs keeping the narrow track spring and bumpstop spacing. 2 inch rears up front, move the spring mounts to suit, push the front diff forward 3-4 inches. 2 inch springs in the rear, longer then standard either custom length or from different cars, move the rear diff back around 1.5 inches. cromo front axles. Vit diff gears. Lockright front and rear. 6.5 TC gears. 33's-34's on decent offset rims or small wheelspacers, cut the guards and bumpstop spacing to fit. power steer. 1.6 mpfi Then learn to drive it, they are a completely different vehicle to Trol's and Cruisers |
|
| Author: | reece [ Sun Jan 30, 2011 3:20 am ] |
| Post subject: | Re: want to build comp truck |
I just went and seen the guy I was buying the truck from and it isn't a 82 softtop it was a sj41 ute with heaps of odd spares. Does anyone know if it is a good model to build a mild comp truck from. I hope for $100 you can't complain. I have attached a couple of pictures. Sorry about quality but was raining and taken with phone. 
|
|
| Author: | inbits [ Sun Jan 30, 2011 3:53 am ] |
| Post subject: | Re: want to build comp truck |
100 bucks is a bargain keep It full bodied though they look much better imo |
|
| Author: | daisy [ Sun Jan 30, 2011 4:11 am ] |
| Post subject: | Re: want to build comp truck |
not wrong.. fullbodied is the go... if you cant.. then find a swb cab and cut that instead. |
|
| Author: | reece [ Sun Jan 30, 2011 4:14 am ] |
| Post subject: | Re: want to build comp truck |
Sorry to be dumb but what is imo. Can you fit a ute body onto it ?. |
|
| Author: | zooky08 [ Sun Jan 30, 2011 4:17 am ] |
| Post subject: | Re: want to build comp truck |
in my opinion u can fit stockman or ute cab onto the chassi |
|
| Author: | inbits [ Sun Jan 30, 2011 4:22 am ] |
| Post subject: | Re: want to build comp truck |
Or swb cab chopped down means your not chopping a rare body |
|
| Author: | steak_knife [ Sun Jan 30, 2011 5:41 am ] |
| Post subject: | Re: want to build comp truck |
 Bob it!!!
|
|
| Author: | MacDaddy [ Sun Jan 30, 2011 6:52 am ] |
| Post subject: | Re: want to build comp truck |
reece wrote: I just went and seen the guy I was buying the truck from and it isn't a 82 softtop it was a sj41 ute with heaps of odd spares.
Does anyone know if it is a good model to build a mild comp truck from. I hope for $100 you can't complain. I have attached a couple of pictures. Sorry about quality but was raining and taken with phone. Buy it anyway just because its a ute/lwb, they are rare, and you have a great find there ! 
Just Dont chop it up... 
|
|
| Author: | reece [ Sun Jan 30, 2011 7:57 am ] |
| Post subject: | Re: want to build comp truck |
How rare are talking about and if I was to sell the top would it sell just by itself. It needs a bit of rust repair but not to much. |
|
| Author: | zooky08 [ Sun Jan 30, 2011 8:25 am ] |
| Post subject: | Re: want to build comp truck |
Every body knows you only got it for $100 now 
|
|
| Author: | reece [ Sun Jan 30, 2011 8:53 am ] |
| Post subject: | Re: want to build comp truck |
True I think I will try to do something with it. What I don't know yet. |
|
| Author: | reece [ Sun Jan 30, 2011 9:23 am ] |
| Post subject: | Re: want to build comp truck |
Will a Twin Cam 1600 4AGE Corolla Engine fit in. |
|
| Author: | steak_knife [ Sun Jan 30, 2011 9:28 am ] |
| Post subject: | Re: want to build comp truck |
reece wrote: Will a Twin Cam 1600 4AGE Corolla Engine fit in.
in the same spot as the one pictured?? Easy, in the eng bay is a lot of work. |
|
| Author: | reece [ Sun Jan 30, 2011 9:30 am ] |
| Post subject: | Re: want to build comp truck |
Can you turbo the 1.3 and if so what size turbo ?. |
|
| Author: | LAY80N [ Sun Jan 30, 2011 9:36 am ] |
| Post subject: | Re: want to build comp truck |
You can turbo the stocko motor. Without a full forged rebuild you are limited in power though. As for turbo size - that all depends on what you want, and if you build the motor for it. First question you should ask is - What comps do i want to do. then work out what the rules are and if rego is required. This is my version of a comp truck 
Yours may vary. If you dont have a decent idea of what you hope to achive you will get lost mid build. If you just want to build a capable weekend truck, Red89 gave you a pretty good starting point above. Layto.... |
|
| Author: | reece [ Mon Jan 31, 2011 9:18 am ] |
| Post subject: | Re: want to build comp truck |
Just got this for free not sure what size, will find out tomorrow but thinking of putting with 1.3 motor for car when rebuilt. 
|
|
| Author: | bakerboy [ Mon Jan 31, 2011 10:15 am ] |
| Post subject: | Re: want to build comp truck |
gayer than aids i mean, who buys sugar free lemon squash? |
|
| Author: | reece [ Mon Jan 31, 2011 10:56 am ] |
| Post subject: | Re: want to build comp truck |
The guy that gave me the turbo for free.
|
|
| Page 1 of 3 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|