OOOO I know this one
the bolt that makes it leak is too long, stick one 5mm shorter in
| auszookers.com https://auszookers.com/forum/ |
|
| Viti leaks https://auszookers.com/forum/viewtopic.php?f=5&t=18681 |
Page 1 of 1 |
| Author: | buzbox [ Sun Jan 30, 2011 11:04 pm ] |
| Post subject: | Viti leaks |
A couple of weeks ago I replaced the timing belt water pump, cam and crank seals. I thought it would've been the crank seal that was leaking but now It's leaking more oil than before. I've taken it to a mechanic and he tells me it's the oil pump, He said he removed a bolt that hold on the power steering bracket and the leak stops but when the the bolt is in it leaks, I find it hard to believe so I'm taking it to another mechanic for a second opinion. What do you guy's think it could be... |
|
| Author: | royce [ Sun Jan 30, 2011 11:20 pm ] |
| Post subject: | Re: Viti leaks |
OOOO I know this one
the bolt that makes it leak is too long, stick one 5mm shorter in
|
|
| Author: | buzbox [ Sun Jan 30, 2011 11:24 pm ] |
| Post subject: | Re: Viti leaks |
Alright I'll give it a crack. |
|
| Author: | buzbox [ Tue Feb 01, 2011 12:04 am ] |
| Post subject: | Re: Viti leaks |
very weird, this is the bolt in question, I've let the engine run for a bit and no leaks. I wonder what is causing it, there is no oil on this bolt. 
|
|
| Author: | royce [ Tue Feb 01, 2011 12:06 am ] |
| Post subject: | Re: Viti leaks |
I dont know why or what makes it do it or what its pushing on, just had the same problem with Bruces when we put power steer in it
|
|
| Author: | buzbox [ Tue Feb 01, 2011 12:39 am ] |
| Post subject: | Re: Viti leaks |
Well I got another bolt and chopped it down, just to be sure I put some gasket goo on it.
fingers crossed. |
|
| Author: | buzbox [ Tue Feb 01, 2011 3:07 am ] |
| Post subject: | Re: Viti leaks |
Thanks big time Royce, it worked !!! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|