auszookers.com
https://auszookers.com/forum/

SIERRA FLEX
https://auszookers.com/forum/viewtopic.php?f=5&t=18744
Page 1 of 1

Author:  ellis [ Tue Feb 01, 2011 7:45 am ]
Post subject:  SIERRA FLEX

i have a 96 coily sierra need some longer shocks due to the spacer's i put in now when i go over bumb's i can fell them full going out and stoping i've seen broken radius arms on coily sierra from to much flex so how big can i go till there is a chance of brakeing something

Author:  ellis [ Tue Feb 01, 2011 7:49 am ]
Post subject:  Re: SIERRA FLEX

im thinking 3 inch longer or is this to long

Author:  mondo [ Tue Feb 01, 2011 7:52 am ]
Post subject:  Re: SIERRA FLEX

there are the ultima shocks that are apparently a 40mm lift. as far as i know this is the highest you can go without any other problems.

Author:  ellis [ Tue Feb 01, 2011 8:00 am ]
Post subject:  Re: SIERRA FLEX

yer i have the ultima kit in it now and and im only after rear front doe's not seem to bad

Author:  Rusho [ Tue Feb 01, 2011 8:06 am ]
Post subject:  Re: SIERRA FLEX

If you only need the rears, measure the current ones and find a replacement that is an inch bigger :wink:

Author:  ellis [ Tue Feb 01, 2011 8:15 am ]
Post subject:  Re: SIERRA FLEX

yer but if i run 3inch shocks will that put to much stress on the radius arms and make then bend or brake under flex

Author:  Rusho [ Tue Feb 01, 2011 8:17 am ]
Post subject:  Re: SIERRA FLEX

ellis wrote:
yer but if i run 3inch shocks will that put to much stress on the radius arms and make then bend or brake under flex


Depends on what and where you wheel. I'd say braving mounts wouldn't be a bad idea and see how that goes. Your only other option is custom corm arms

Author:  mondo [ Tue Feb 01, 2011 9:23 am ]
Post subject:  Re: SIERRA FLEX

get some longer ones on the rear, and let me know how you go, so i know whether or not to do it also ;)

Author:  ellis [ Tue Feb 01, 2011 9:32 am ]
Post subject:  Re: SIERRA FLEX

will do

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/