| auszookers.com https://auszookers.com/forum/ |
|
| 2" lift, vitara https://auszookers.com/forum/viewtopic.php?f=5&t=1875 |
Page 1 of 1 |
| Author: | azza [ Sun Mar 23, 2008 1:49 pm ] |
| Post subject: | 2" lift, vitara |
A friend has a swb vitara, and wants to lift it 2". how bigger rubber will he get under it after doing the lift? He was hoping 30-31". has anyone done this?? |
|
| Author: | royce [ Sun Mar 23, 2008 4:40 pm ] |
| Post subject: | Re: 2" lift, vitara |
you wont really get any bigger tire under with just suspension lift than no lift cause the tires still travel up into the wheel arches the same but 235 are a pretty easy fit unmodified, providing you dont go too wide in the rim offset, I have -13mm 15x7 and it gave me all kinds of trouble but same tires on stock rims are fine |
|
| Author: | azza [ Sun Mar 23, 2008 8:04 pm ] |
| Post subject: | Re: 2" lift, vitara |
cool, thanks. What sort of mods need to be done to put 30-31's on it? |
|
| Author: | royce [ Sun Mar 23, 2008 8:37 pm ] |
| Post subject: | Re: 2" lift, vitara |
30's, probably hammer the rear of the front arch and maybe bumpstop spacers in the rear 31's, 2" bodylift |
|
| Author: | teddy [ Mon Mar 24, 2008 1:50 pm ] |
| Post subject: | Re: 2" lift, vitara |
I had 2 inch kings springs (with 15mm spacers in the front) and i fitted 30 in BFG AT's with no need to hammer and body panels at all. and only had a little rubbing at full lock. |
|
| Author: | suzukiboy [ Wed Mar 26, 2008 4:29 am ] |
| Post subject: | Re: 2" lift, vitara |
azza wrote: cool, thanks. What sort of mods need to be done to put 30-31's on it?
3" lift 30" MTR's no rubbing, no mod to guards. |
|
| Author: | norm [ Sat Apr 12, 2008 3:20 am ] |
| Post subject: | Re: 2" lift, vitara |
2 inch lift, with some firewall massaging, i got 31s on there. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|