| auszookers.com https://auszookers.com/forum/ |
|
| Transfer gear how to https://auszookers.com/forum/viewtopic.php?f=5&t=18751 |
Page 1 of 1 |
| Author: | boostedbrick [ Tue Feb 01, 2011 10:04 am ] |
| Post subject: | Transfer gear how to |
Anyone seen a transfer gear swap how to? or have a set of instructions floating about as mine didnt come with any, and i dont feel like winging this and breaking crap |
|
| Author: | alex [ Tue Feb 01, 2011 10:11 am ] |
| Post subject: | Re: Transfer gear how to |
http://www.trail-gear.com/tech/zuk65gears/index.html http://www.lowrangeoffroad.com/suzuki/s ... gears.html |
|
| Author: | Ben_Sierra [ Tue Feb 01, 2011 10:14 am ] |
| Post subject: | Re: Transfer gear how to |
I used the trail gear link when I did mine, its a pretty good guide. |
|
| Author: | alex [ Tue Feb 01, 2011 10:16 am ] |
| Post subject: | Re: Transfer gear how to |
Ben_Sierra wrote: I used the trail gear link when I did mine, its a pretty good guide.
x2 the lowrange link has a link to the trail gear link so i thought i might chuck that in there |
|
| Author: | boostedbrick [ Tue Feb 01, 2011 10:23 am ] |
| Post subject: | Re: Transfer gear how to |
Sweet, cheers blokes. Just having a quick look through that, do the 4.9s replace less gears than the 6.5s? |
|
| Author: | alex [ Tue Feb 01, 2011 10:25 am ] |
| Post subject: | Re: Transfer gear how to |
boostedbrick wrote: Sweet, cheers blokes. Just having a quick look through that, do the 4.9s replace less gears than the 6.5s?
when i did my 4.9s before i went 6.5 i think there was less gears |
|
| Author: | Ben_Sierra [ Tue Feb 01, 2011 10:31 am ] |
| Post subject: | Re: Transfer gear how to |
4.16 has less gears cos you don't replace the low output gear... Dunno about other ratios though... Only one less anyway |
|
| Author: | boostedbrick [ Tue Feb 01, 2011 10:53 am ] |
| Post subject: | Re: Transfer gear how to |
Cool, i have a crack tomorrow night. |
|
| Author: | 303zuke [ Tue Feb 01, 2011 7:44 pm ] |
| Post subject: | Re: Transfer gear how to |
boostedbrick wrote: Just having a quick look through that, do the 4.9s replace less gears than the 6.5s?
Yes, the 4.16, 4.9 and 5.14 sets all keep the original 1.3 low output gear, the 6.5 set replaces all the gears. |
|
| Author: | wooty [ Tue Feb 01, 2011 9:52 pm ] |
| Post subject: | Re: Transfer gear how to |
I'm lost... any kind blokes care to elaborate it further? I'm very new to 4WD.. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|