| auszookers.com https://auszookers.com/forum/ |
|
| need help with zook carb wires. https://auszookers.com/forum/viewtopic.php?f=5&t=18768 |
Page 1 of 1 |
| Author: | finlay113 [ Wed Feb 02, 2011 4:26 am ] |
| Post subject: | need help with zook carb wires. |
i know theres two different sorts of carbys for the 1.3 sierras. i have the carby off my WT. and its now in my ute. what wires do i need to join? can i do this or do i need the other type of carby to plug straight in. my carby had the single plug with the 3 wires in it |
|
| Author: | christover1 [ Wed Feb 02, 2011 6:02 am ] |
| Post subject: | Re: need help with zook carb wires. |
| Author: | finlay113 [ Wed Feb 02, 2011 6:45 am ] |
| Post subject: | Re: need help with zook carb wires. |
I don't have the old carby so need another way round this problem |
|
| Author: | mazdaspater [ Mon Feb 14, 2011 11:03 am ] |
| Post subject: | Re: need help with zook carb wires. |
Did you sort it out? two wires to solenoid closest to dizzy, one is earth, one is 12V on ignition on. You will hear a click connecting power to it. The other one looks like a basic throttle position sensor, towards the front of car, don't worry about it. Did this to mine last week, let me know if you need wire colours. Chris. |
|
| Author: | finlay113 [ Tue Feb 15, 2011 3:25 am ] |
| Post subject: | Re: need help with zook carb wires. |
i think i sorted it out. did it like youve described above |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|